Lights -> Adaptive Light Control for Your BMW X6 4 Door Second Generation (2015-2019)

Lights  
Controls  
To avoid blinding oncoming traffic, the Adap‐  
tive Light Control does not swivel to the driv‐  
er's side when the vehicle is at a standstill.  
System limits  
The automatic headlight control cannot serve  
as a substitute for your personal judgment of  
lighting conditions.  
Depending on the equipment version, Adap‐  
tive Light Control consists of one or several  
systems:  
For example, the sensors are unable to detect  
fog or hazy weather. To avoid safety risks un‐  
der these conditions, you should always switch  
on the lights manually.  
Cornering light, refer to page 109.  
Activating  
Position of switch:  
Daytime running lights  
Adaptive Headlight Control is active when the  
engine is running.  
General information  
Position of switch:  
,
,
Cornering light  
The daytime running lights light up when the  
ignition is switched on. After the ignition is  
switched off, the parking lights light up in posi‐  
In tight curves, for instance on mountainous  
roads or when turning, an additional, cornering  
light is switched on that lights up the inside of  
the curve better when the vehicle is moving  
below a certain speed.  
tion  
.
Activating/deactivating  
The cornering light is automatically switched  
on depending on the steering angle or the use  
of turn signals.  
In some countries, daytime running lights are  
mandatory, so it may not be possible to deacti‐  
vate the daytime running lights.  
When driving in reverse, the cornering lights  
may be automatically switched on regardless  
of the steering angle.  
Using iDrive:  
1. "Settings"  
2. "Lighting"  
3. "Daytime running lamps"  
Adaptive headlight range  
control  
The adaptive headlight range control compen‐  
sates for acceleration and braking operations  
in order not to blind the oncoming traffic and to  
achieve optimum illumination of the roadway.  
The setting is stored for the driver profile cur‐  
rently used.  
Adaptive Light Control  
The concept  
Adaptive Light Control is a variable headlight  
control system that enables dynamic illumina‐  
tion of the road surface.  
High-beam Assistant  
Concept  
The high-beam Assistant detects other traffic  
participants early on and automatically  
switches the high beams on or off depending  
on the traffic situation.  
General information  
Depending on the steering angle and other pa‐  
rameters, the light from the headlight follows  
the course of the road.  
109