Lights -> Fog lights for Your BMW X6 4 Door Second Generation (2015-2019)

Controls  
Lights  
General information  
System limits  
The high-beam Assistant ensures that the high  
beams are switched on, whenever the traffic  
situation allows. In the low speed range, the  
high beams are not switched on by the system.  
The high-beam Assistant cannot serve as a  
substitute for the driver's personal judgment of  
when to use the high beams. In situation that  
require this, therefore switch off manually.  
The system responds to light from oncoming  
traffic and traffic driving ahead of you, and to  
adequate illumination, for instance in towns  
and cities.  
The system is not fully functional in the follow‐  
ing situations, and driver intervention may be  
necessary:  
In very unfavorable weather conditions,  
such as fog or heavy precipitation.  
The high beams can be switched on and off at  
any time as usual.  
When detecting poorly-lit road users such  
as pedestrians, cyclists, horseback riders  
and wagons; when driving close to train or  
ship traffic; and at animal crossings.  
Activating/deactivating  
In tight curves, on hilltops or in depres‐  
sions, in cross traffic or half-obscured on‐  
coming traffic on highways.  
In poorly-lit towns and cities and in the  
presence of highly reflective signs.  
When the windshield in front of the interior  
mirror is fogged over, dirty or covered with  
stickers, etc.  
Position of switch, depending on the vehicle  
equipment:  
,
Press and hold button on signal lever.  
Fog lights  
Front fog lights  
Concept  
The indicator light in the instrument  
cluster is illuminated when the low  
beams are switched on.  
The front fog lights work alongside the low  
beams to illuminate a wider area of the road‐  
way.  
The headlights are automatically switched be‐  
tween low beams and high beams.  
The blue indicator light in the instru‐  
ment cluster lights up when the system  
switches on the high beams.  
Functional requirement  
The low beams must be switched on before  
switching on the front fog lights.  
The high-beam Assistant is deactivated when  
manually switching the high beams on and off,  
refer to page 77.  
Switching on/off  
To reactivate the high-beam Assistant, press  
the button on the turn signal lever.  
Press button.  
The green indicator light lights up if  
the front fog lights are switched on.  
110  
Lights  
Controls  
If the automatic headlight control, refer to  
page 108, is activated, the low beams will  
come on automatically when you switch on the  
front fog lights.  
Overview  
When the high beams or headlight flasher are  
activated, the front fog lights are not switched  
on.  
Instrument lighting  
1
2
Interior lights  
Reading lights  
Functional requirement  
The parking lights or low beams must be  
switched on to adjust the brightness.  
Switching the interior lights on/off  
Settings  
Press button.  
Adjust the brightness with the  
thumbwheel.  
To switch off permanently: press the button  
and hold for approx. 3 seconds.  
Switching the reading lights on/off  
Press button.  
Interior lights  
Depending on the vehicle equipment, the  
reading lights are located next to the interior  
lights in the front and rear.  
General information  
Depending on the equipment, the interior  
lights, footwell lights, entry lamps, and cour‐  
tesy lamps are controlled automatically.  
Ambient light  
Thumb wheel for the instrument lighting con‐  
trols brightness of some of these features.  
General information  
Depending on your optional features lighting  
can be adjusted for some lights in the car's in‐  
terior.  
Selecting color scheme  
On the Control Display:  
1. "Settings"  
2. "Lighting"  
3. "Lighting design"  
4. Select the desired setting.  
To deactivate the ambient light: "Off".  
111