Settings -> Front seats for Your BMW X6 4 Door Second Generation (2015-2019)

Settings  
Controls  
Settings  
a risk of sliding under the safety belt in an acci‐  
dent. There is a risk of injuries or danger to life.  
Adjust the seat prior to starting the trip. Adjust  
the backrest so that it is in the most upright  
position as possible and do not adjust again  
while driving.◀  
Vehicle features and options  
This chapter describes all standard, country-  
specific and optional features offered with the  
series. It also describes features that are not  
necessarily available in your vehicle, e. g., due  
to the selected options or country versions.  
This also applies to safety-related functions  
and systems. When using these functions and  
systems, the applicable laws and regulations  
must be observed.  
WARNING  
There is a risk of jamming when moving  
the seats. There is a risk of injury or risk of  
property damage. Make sure that the area of  
movement of the seat is clear prior to any ad‐  
justment.◀  
Sitting safely  
Electrically adjustable seats  
General information  
An ideal seating position that meets the needs  
of the occupants can make a vital contribution  
to relaxed, fatigue-free driving.  
The seat setting for the driver's seat is stored  
for the profile currently used. When the vehicle  
is unlocked via the remote control, the position  
is automatically retrieved if the function, refer  
to page 49, is activated for this purpose.  
In the event of an accident, the correct seating  
position plays an important role. Follow the in‐  
formation in the following chapters:  
Seats, refer to page 55.  
Safety belts, refer to page 59.  
Head restraints, refer to page 60.  
Airbags, refer to page 113.  
The current seat position can be stored using  
the memory function, refer to page 61.  
Overview  
Front seats  
Safety information  
WARNING  
Seat adjustments while driving can lead  
to unexpected movements of the seat. Vehicle  
control could be lost. There is a risk of an acci‐  
dent. Only adjust the seat on the driver's side  
when the vehicle is stationary.◀  
1
2
3
4
5
Memory function  
Upper backrest  
WARNING  
Backrest width  
With a backrest inclined too far to the  
rear, the efficacy of safety gear, including  
safety belts can no longer be ensured. There is  
Lumbar support  
Backrest tilt, head restraint  
55  
Controls  
Settings  
Backrest tilt  
6
7
Forward/backward, height, seat tilt  
Thigh support  
Forward/backward  
Move switch forward or backward.  
Thigh support  
Push switch forward or backward.  
Multifunctional seat  
Height  
Push switch forward or backward.  
Push switch up or down.  
Sport seat  
Seat tilt  
Pull the lever at the front of the seat and adjust  
the thigh support.  
Move switch up or down.  
Lumbar support  
The curvature of the seat backrest can be ad‐  
justed in a way that it supports the lumbar re‐  
56  
Settings  
Controls  
gion of the spine. The lower back and the  
spine are supported for upright posture.  
Settings  
Press the front/rear section  
of the button:  
The curvature is increased/  
decreased.  
Press the upper/lower sec‐  
tion of the button:  
The curvature is shifted up/  
down.  
Press the button on the respective side.  
Backrest width  
Front seat heating  
Overview  
General information  
You can change the backrest width by adjust‐  
ing the side wings of the backrest.  
Settings  
Press the front section of  
the button:  
The backrest width de‐  
creases.  
Press the rear section of the  
button:  
Seat heating  
The backrest width in‐  
creases.  
Switching on  
Press button once for each tempera‐  
ture level.  
Upper backrest  
General information  
The maximum temperature is reached when  
three LEDs are lit.  
The upper backrest supports the back in the  
shoulder area. A correct setting leads to a re‐  
laxed seating position and reduces strain on  
the shoulder muscles.  
If the trip is continued within approx. 15 mi‐  
nutes after a stop, seat heating is activated au‐  
tomatically with the temperature selected last.  
When ECO PRO is activated, the heater output  
is reduced.  
Switching off  
Press and hold the button, until the  
LEDs go out.  
57  
Controls  
Settings  
Seat heating distribution  
Switching off  
The heating action in the seat cushion and the  
seat backrest can be distributed in different  
ways.  
Press and hold the button, until the  
LEDs go out.  
Using iDrive:  
Rear seats  
1. "Climate"  
2. "Front seat heating"  
3. Select desired seat.  
Second row of seats  
4. Turn the Controller to set the seat heating  
distribution.  
Safety information  
WARNING  
There is a risk of jamming when folding  
down the center armrest in the rear. There is a  
risk of injury. Make sure that the area of move‐  
ment of the center armrest is clear during fold‐  
ing down.◀  
Active seat ventilation, front  
The concept  
The seat cushion and backrest surfaces are  
cooled by means of integrated fans.  
The ventilation cools the seat, e.g., if the vehi‐  
cle interior is overheated or for continuous  
cooling at high temperatures.  
Rear seat heating  
Overview  
Overview  
Seat heating  
Active seat ventilation  
Switching on  
Switching on  
Press button once for each tempera‐  
ture level.  
Press button once for each ventilation  
level.  
The maximum temperature is reached when  
three LEDs are lit.  
The highest level is active when three LEDs  
are lit.  
If the trip is continued within approx. 15 mi‐  
nutes after a stop, seat heating is activated au‐  
tomatically with the temperature selected last.  
The ventilation switches back by one level af‐  
ter a short time.  
When ECO PRO is activated, the heater output  
is reduced.  
58