Settings -> Memory function for Your BMW X6 4 Door Second Generation (2015-2019)

Settings  
Controls  
Do not use seat or head restraint covers.  
Adjusting the side extensions  
Do not hang objects, for instance clothes  
hangers, directly on the head restraint.  
Only use accessories that have been de‐  
termined to be safe for attachment to a  
head restraint.  
Do not use any accessories, for instance  
pillows, while driving.◀  
Active head restraint  
Fold the side extensions on the head restraint  
forward for increased lateral support in the  
resting position.  
In the event of a rear-end collision with a cer‐  
tain severity, the active head restraint automat‐  
ically reduces the distance from the head.  
In the event of wear and tear due to an acci‐  
dent, or if otherwise damaged, have the active  
head restraint checked and if necessary re‐  
placed  
Removing  
The head restraints cannot be removed.  
Adjusting the height: electrical head  
restraints  
Memory function  
Concept  
The following settings can be stored and, if  
necessary, retrieved using the memory func‐  
tion:  
Seat position.  
Exterior mirror position.  
Steering wheel position.  
Height of the Head-up Display.  
Push switch up or down.  
General information  
Two memory locations with different settings  
can be set for each driver profile, refer to  
page 46.  
Distance to the back of the head:  
electrical head restraints  
The head restraint is automatically reposi‐  
tioned when the upper backrest is adjusted.  
Depending on the vehicle equipment, the fol‐  
lowing settings are not stored:  
Backrest width.  
Lumbar support.  
61  
Controls  
Settings  
The procedure stops when a switch for setting  
the seat or one of the memory buttons is  
pressed.  
Safety information  
WARNING  
Using the memory function while driving  
can lead to unexpected seat or steering wheel  
movements. Vehicle control could be lost.  
There is a risk of an accident. Only retrieve the  
memory function when the vehicle is station‐  
ary.◀  
While driving, the seat position adjustment on  
the driver's side is interrupted after a short  
time.  
Calling up of a seat position  
deactivated  
WARNING  
After a brief period, calling up stored seat posi‐  
tions is deactivated to save battery power.  
There is a risk of jamming when moving  
the seats. There is a risk of injury or risk of  
property damage. Make sure that the area of  
movement of the seat is clear prior to any ad‐  
justment.◀  
To reactivate calling up of a seat position:  
Open or close the door or tailgate.  
Press a button on the remote control.  
Press the Start/Stop button.  
Overview  
Mirrors  
Exterior mirrors  
General information  
The mirror on the front passenger side is more  
curved than the driver's side mirror.  
The mirror setting is stored for the driver pro‐  
file currently in use. When the vehicle is un‐  
locked via the remote control, the position is  
automatically retrieved if the function, refer to  
page 49, is activated for this purpose.  
Storing  
1. Switch on the ignition.  
2. Set the desired position.  
The current exterior mirror position can be  
stored using the memory function, refer to  
page 61.  
3.  
Press button. The LED in the but‐  
ton lights up.  
4. Press selected button 1 or 2 while the LED  
is lit. The LED goes out.  
Safety information  
WARNING  
Button was pressed inadvertently:  
Press button again.  
Objects reflected in the mirror are closer  
than they appear. The distance to the traffic  
behind could be incorrectly estimated, for in‐  
stance while changing lanes. There is a risk of  
an accident. Estimate the distance to the traffic  
behind by looking over your shoulder.◀  
The LED goes out.  
Calling up settings  
The stored position is called up automatically.  
Press selected button 1 or 2.  
62