Get Transporting children safely -> LATCH child restraint fixing system Guide for BMW X6 4 Door Second Generation (2015-2019)

Transporting children safely

Controls

til the best possible belt guide position is

reached.

Locking the safety belt

1. Pull out the belt strap completely.

2. Secure the child restraint system with the

safety belt.

Backrest width

Adjustable backrest width: before installing a

child restraint system in the front passenger

seat, open the backrest width completely. Do

not change the backrest width again and do

not call up a memory position.

3. Allow the belt strap to be pulled in and pull

it tight against the child restraint system.

The safety belt is locked.

Unlocking the safety belt

1. Unbuckle the belt buckle.

Child seat security

2. Remove the child restraint system.

3. Allow the belt strap to be pulled in com‐

pletely.

The rear safety belts and the front passenger

safety belt can be permanently locked to fas‐

ten child restraint systems.

LATCH child restraint fixing system

General information

Safety information

LATCH: Lower Anchors and Tether for Chil‐

dren.

WARNING

If the LATCH child restraint fixing sys‐

tems are not correctly engaged, the protective

effect of the LATCH child restraint fixing sys‐

tem can be limited. There is a risk of injuries or

danger to life. Make sure that the lower an‐

chors are securely engaged and that the

LATCH child restraint fixing system fits se‐

curely against the backrest.◀

Pay attention to the operating and safety infor‐

mation of the child restraint system manufac‐

turer when installing and using LATCH child

restraint fixing systems.

Mounts for the lower LATCH anchors

The lower anchors may be used to attach the

CRS to the vehicle seat up to a combined child

and CRS weight of 65 lb/30 kg when the child

is restrained by the internal harnesses.

Controls

Transporting children safely

Position

Child restraint systems with tether

strap

Symbol

Meaning

Safety information

The corresponding symbol

shows the mounts for the

lower LATCH anchors.

WARNING

If the upper retaining strap is incorrectly

used for the child restraint system, the protec‐

tive effect can be reduced. There is a risk of in‐

jury. Make sure that the upper retaining strap is

not guided across sharp edges and without

twisting to the upper retaining strap.◀

Seats equipped with lower an‐

chors are marked with a pair,

2, of LATCH symbols.

It is not recommended to use

the inner lower anchors of

standard outer LATCH posi‐

tions to fasten a child restraint

system on the middle seat.

Use the vehicle safety belt in‐

stead for the middle seat.

WARNING

If the rear backrest is not locked, the pro‐

tective effect of the child restraint system is

limited or there is none. In particular situations,

for instance braking maneuvers or in case of an

accident, the rear backrest can fold forward.

There is a risk of injuries or danger to life. Make

sure that the rear backrests are locked.◀

NOTE

The mounting points for the upper re‐

taining straps of child restraint systems are

only provided for these retaining straps. When

other objects are mounted, the anchors can be

damaged. There is a risk of property damage.

Only mount child restraint systems to the up‐

per retaining straps.◀

Mounts for the lower LATCH anchors are lo‐

cated behind the seat cover between the back‐

rest and the seat cushion.

Anchors

Open the zipper to access the anchors.

The respective symbol shows the an‐

chor for the upper retaining strap.

Seats with an upper top tether are

Before installing LATCH child

restraint fixing systems

Pull the safety belt away from the area of the

child restraint system.

marked with this symbol. It can be found on

the rear seat backrest or the rear window shelf.

Assembly of LATCH child restraint

fixing systems

1. Install child restraint system, see manufac‐

turer's information.

2. Ensure that both LATCH anchors are prop‐

erly connected.

Transporting children safely

Controls

Routing the retaining strap

Locking the doors and

windows in the rear

Rear doors

Direction of travel

Head restraint

Hook for upper retaining strap

Anchor/eye

Push the locking lever on the rear doors up.

Seat backrest

The door can now be opened from the outside

only.

Upper retaining strap

Safety switch for the rear

Attaching the upper retaining strap to

the mounting point

Press button on the driver's door.

The LED lights up if the safety func‐

tion is switched on.

1. Middle seat: raise the head restraint if

needed.

2. Outer seats: guide the upper retaining

strap over the head restraint.

This locks various functions so that they can‐

not be operated from the rear.

Middle seat: guide the upper retaining

strap between the supports of the head re‐

straint.

3. If there is a retaining strap, run it between

the backrest and the cargo cover.

4. Attach the hook of the retaining strap to

the mounting eye.

5. Tighten the retaining strap by pulling it

down.

6. Middle seat: lower and lock head restraints

as needed.

Transporting children safely -> LATCH child restraint fixing system for Your BMW X6 4 Door Second Generation (2015-2019)

Related Topics

Transporting children safely

Popular Owner Manuals

Latest Owner Manuals