40nElectric power windows
Use switch 2 to select the window you
wish to open or close:
Because the power windows are
sealed at high pressure to prevent
wind noise when closed, a powerful
motor is required for efficient closing.
When closing the windows, always
ensure that they are not obstructed in
any way. Unsupervised use of these
systems can result in serious personal
injury. Remove the ignition key to deac-
tivate the electric power windows
whenever you leave the vehicle. Never
leave the keys in the vehicle with unsu-
pervised children.
> Driver's window
Push the switch all the way to the left
> Passenger-side window
Push the switch all the way to the
right
> To activate both windows at the
same time:
Move the switch to the center posi-
tion.
The switch on the passenger-side door
activates the window for that side only.
To open and close the windows
Never place anything that could
obstruct the driver's vision on or next to
the windows.<
From ignition key position 1:
After the ignition has been switched off:
> Depress the rocker switch 1 until you
feel resistance:
Provided that no door is opened in the
intervening period, the electric power
windows remain available for operation
for up to 15 minutes.
The window remains in motion for as
long as you maintain pressure on the
switch
To use the convenience mode via the
door lock or the remote control, refer to
page 32 or 34.
> Briefly press rocker switch 1 to just
beyond the initial point of resistance
(one-touch mode):
The window automatically remains in
motion until it reaches the end of its
travel. Briefly press the switch a
second time to stop the window.
The one-touch mode cannot be
used to close the passenger-side
window.<
English 
