Accesses
REAR ROOF FLAP
This rear roof flap is only compatible
with the hinged doors.
To open the rear roof flap:
-
lower the black paddle to secure
the rear roof flap.
The side supports can be used as
hooking points.
Securing the rear roof flap places it
on the seal correctly and guarantees
sealing without noise.
-
-
raise the black paddle of the toggle,
The rear bumper has been
strengthened to serve as a
footrest on entering the vehicle.
relieve the toggle by pressing the
rear roof flap (downwards) then
release the hook,
Support bar
A support bar is provided for
transporting long loads, after opening
the rear roof flap.
Fold back the support bar by lifting the
lever.
Support it to the door pillar.
-
-
lift the rear roof flap,
pass the point of resistance to
secure the rear roof flap using the
support struts.
Never drive without the support
bar in place.
The rear doors only lock when the
support bar is installed.
When the rear roof flap is open, take
care when driving where height is
restricted.
Never rest loads directly on the rear
doors.
Support the long loads to be
transported, lift them and reposition the
support bar with one hand.
Ensure that it is secured correctly by
pressing the handle downwards past
the point of resistance and secure the
loads firmly.
To close the rear roof flap:
-
check that the support bar is
secured correctly,
lower the rear roof flap,
-
-
while pressing the rear roof flap
(downwards), take hold of the two
loops of the spring then place the
hook in its housing,
Comply with the usual indications, to
attract the attention of other drivers.
English 