Changing a bulb
Open the bonnet. To access the bulbs,
reach behind the headlamp unit.
Carry out the operations in reverse
order to refit each bulb and check that
the bonnet is closed securely.
Halogen bulbs must be changed
with the headlamp off. Wait a few
minutes (risk of serious burns).
Do not touch the bulb directly with your
fingers, use lint-free cloths.
It is normal for condensation to form
inside the headlamps. Regular use of
the vehicle eliminates this misting.
The bulbs must be changed with
the ignition off or with the battery
disconnected. Wait approximately
3 minutes after changing the bulb
before reconnecting the battery.
Front lamps
1. Dipped / Main beam headlamps
Type C, H4 - 55W
2. Sidelamps
Type A, W5W - 5W
-
Remove the centre cover by pulling
the flexible rubber tab.
-
Remove the cover by pulling the
flexible rubber tab.
-
-
-
Disconnect the electrical connector.
Release the retaining tab.
Change the bulb taking care
to align the metal part with the
grooves on the lamp.
-
Remove the bulb holder fitted by
pressure by pulling the connector.
Change the bulb.
Ensure that the cover is refitted
correctly all round to assure correct
sealing.
Check that the lamps operate correctly
after each operation.
-
-
-
-
Reposition the retaining tab.
Ensure that the cover is refitted
correctly all round to assure correct
sealing.
High pressure washing
When using this type of washing
on stubborn dirt, do not persist on
the headlamps, the lamps and their
edges to avoid damaging their coating
and seals.
English 