Advertisement

Advertisement

READY TO GO -> Fuel gauge for Your Citroen Berlingo SUV Second Generation (2008-2018)

Instruments and controls  
What you should do if the needle  
enters the red zone:  
Reduce your speed or let the engine  
run at idle.  
What you should do if the warning  
lamp comes on:  
-
stop immediately, switch off the  
ignition. The fan may continue to  
operate for a certain time, up to  
approximately 10 minutes,  
-
wait for the engine to cool down in  
order to check the coolant level and  
top it up if necessary.  
As the cooling system is pressurised,  
follow the procedure below to avoid the  
risk of scalding:  
-
wait at least one hour after  
switching off the engine before  
carrying out any work,  
-
-
-
unscrew the cap by 1/4 turn to  
allow the pressure to drop,  
when the pressure has dropped,  
check the level in the header tank,  
if necessary, remove the cap to  
top up.  
FUEL GAUGE  
COOLANT TEMPERATURE  
The needle is positioned before the  
red zone: normal operation.  
In arduous conditions of use or hot  
climatic conditions, the needle may  
move close to the red graduations.  
The fuel level is tested each time the  
key is turned to the "running" position.  
If the needle remains in the red  
zone, have the system checked by  
a CITROËN dealer or a qualified  
workshop.  
The gauge is positioned on:  
-
1: the fuel tank is full,  
approximately 60 litres.  
-
0: the reserve is now being used,  
the warning lamp comes on  
continuously. The reserve when  
the warning first comes on is  
approximately 8 litres.  
Refer to chapter 7, "Levels"  
section.  
Refer to chapter 7, "Fuel" section.