Child safety
ISOFIx MOUNTINGS
To secure the child seat to the
Top Tether:
-
remove and stow the head restraint
before installing the child seat in
this seating position (refit it once
the child seat has been removed),
-
pass the upper strap of the child
seat over the top of the seat
backrest, between the apertures for
the head restraint rods,
-
-
secure the hook on the upper strap
to the rear ring,
tighten the upper strap.
Your vehicle has been approved in A rear ring B, located on the back
accordance with the latest ISOFIX regulation. of the vehicle's seat backrest, for
securing the upper strap referred to as
The mountings comprise three rings for each
the Top Tether.
seat.
The Top Tether is used to secure the
upper strap of child seats that have
one. This arrangement limits the
forward tipping of the child seat in the
event of a frontal impact.
This ISOFIX mounting system
guarantees you fast, reliable and safe
fitting of the child seat in your vehicle.
The incorrect installation of a child
seat in a vehicle compromises the
protection of the child in the event
of an accident.
Follow strictly the instructions for
fitting child seats contained in the
manufacturer's installation guide.
The ISOFIX child seats are fitted with
two latches which are secured on the
two front rings A.
Some also have an upper strap which
is attached to the rear ring B.
Two front rings A, located between
the vehicle seat backrest and cushion,
indicated by a marking.
Refer to the table for information on
the installation of ISOFIX child seats in
your vehicle.
5
English 