Advertisement

Advertisement

SAFETY -> Seat belts for Your Citroen Berlingo SUV Second Generation (2008-2018)

Seat belts  
Good practice  
The driver must ensure that  
passengers use the seat belts correctly  
and that they are all strapped in  
securely before moving off.  
Wherever you are seated in the  
vehicle, always fasten your seat belt,  
even for short journeys.  
The seat belts are fitted with an inertia  
reel which automatically adjusts the  
length of the strap to your size.  
Do not use accessories (clothes pegs,  
clips, safety pins, etc.) which allow the  
seat belt straps to fit loosely.  
Ensure that the seat belt has reeled in  
correctly after use.  
After folding or moving a seat or a rear  
bench seat, ensure that the seat belt  
has reeled in correctly and that the  
buckle is ready to accommodate the  
tongue.  
Depending on the nature and  
seriousness of any impact, the  
pretensioning device may be deployed  
before and independently of inflation  
of the airbags. It instantly tightens  
the seat belts against the body of the  
occupants.  
Deployment of the pretensioners is  
accompanied by a slight discharge  
of harmless smoke and a noise, due  
to the activation of the pyrotechnic  
cartridge incorporated in the system.  
SEAT BELTS  
Height adjustment  
Unfastening  
Squeeze the control with the return and Press the red button.  
slide the assembly on the driver's seat  
side and on the individual passenger  
seat side.  
Seat belt(s) not fastened  
warning lamp  
Fastening  
When the vehicle is started,  
this warning lamp comes on  
if a user at the front has not  
fastened their seat belt.  
Pull the strap, then insert the tongue  
into the buckle.  
Check that the seat belt is fastened  
correctly by pulling the strap.  
The front passenger's seat may be  
fitted with a presence detector, in which  
case you should not place anything  
heavy on this seat as this could trigger  
the alert.  
Seat belts  
The force limiter reduces the pressure  
of the seat belt against the body of the  
occupants.  
The pretensioning seat belts are active  
when the ignition is switched on.  
The inertia reels are fitted with a device  
which automatically locks the strap in  
the event of a collision or emergency  
braking or if the vehicle rolls over.  
You can unfasten the seat belt by  
pressing the red button on the buckle.  
Guide the seat belt after unfastening.  
Recommendations for children:  
Front seat belts  
-
use a suitable child seat if the  
passenger is less than 12 years old  
or shorter than one metre fifty,  
The front seats are fitted with  
pretensioners and force limiters.  
-
never allow a child to travel on  
your lap, even with the seat belt  
fastened.  
Rear seat belts  
(5 seat version)  
For more information on child  
seats, refer to the "Child safety"  
section of chapter 5.  
The rear seats are fitted with  
three-point inertia reel seat belts.  
The airbag warning lamp comes on  
if the pretensioners are deployed.  
Contact a CITROËN dealer or a  
qualified workshop.  
In accordance with current safety  
regulations, your CITROËN dealer can  
guarantee all work or any checks, from  
testing to maintenance, on your seat  
belt equipment.  
Have the seat belts checked regularly  
(even after a minor impact) by a  
CITROËN dealer or a qualified  
workshop: they must not show any  
signs of wear, cutting or fraying  
and they must not be converted or  
modified.  
In order to be effective, a seat belt:  
-
must restrain one person only,  
-
must not be twisted, check by  
pulling in front of you with an even  
movement,  
-
must be tightened as close to the  
body as possible.  
The upper part of the seat belt should  
be positioned in the hollow of the  
shoulder.  
The lap part should be placed as low  
as possible on the pelvis.  
Clean the seat belt straps with  
soapy water or a textile cleaning  
product, sold by CITROËN  
dealers.  
Do not interchange the seat belt  
buckles as they will not fulfil their role  
properly. If the seats are fitted with  
armrests, the lap part of the seat belt  
should always pass under the armrest.  
Check that the seat belt is fastened  
correctly by pulling the strap firmly.  
5
Seat belts  
In row 3  
The two seats are fitted with  
three-point inertia reel seat belts.  
The row 3 seat belts which are not in  
use can be stored to clear the load  
space and make use of the load space  
cover easier.  
Rear seat belts  
(7 seat version)  
In row 2  
The three seats are fitted with  
three-point inertia reel seat belts.  
When folding the side seats or the  
seat backs to the table position,  
avoid trapping the strap of the centre  
seat belt.  
Hook the snap hook in the location  
provided on the rear pillar trim.  
Do not attach the seat belts to the  
stowing rings marked with a red cross,  
represented on the label.  
Take care to hook the seat belts  
correctly on the rings provided for this  
purpose.  
When handling the side seats  
(removing/installing) or when  
accessing row 3, avoid hooking the  
centre seat belt.  
Ensure that the centre seat belt is  
rolled up correctly in its strengthener  
on the roof.