Advertisement

Advertisement

Safety -> "ISOFIX" mountings for Your Citroen Berlingo SUV Third Generation (2018-2025)

Safety  
(f) With the fixed passenger seat (which cannot be placed in the folded position), adjust the backrest angle to 0°.  
For more information on the Front seats and, in particular, the folded position for the backrest, refer to the corresponding section.  
(g) On the M version, fold down the backrests in row 2.  
(h) Installing child seats with a support leg is prohibited in the third row.  
U Seat position suitable for installing a child seat secured using the seat belt and universally approved for rearward-facing and/or forward-facing use.  
UF Seat position suitable for installing a child seat secured using a seat belt and universally approved for forward-facing use.  
X Seat position not suitable for installing a child seat for the stated weight class.  
this device limits the extent to which the child  
seat can tilt forward.  
"ISOFIX" mountings  
This ISOFIX mounting system provides fast,  
reliable and safe fitting of the child seat in the  
vehicle.  
Row 2  
The ISOFIX child seats are fitted with two  
latches which are secured on the two front  
rings A.  
Some child seats also have an upper strap which  
is attached to rear ring B.  
To secure the child seat to the Top Tether:  
– remove and stow the head restraint before  
installing a child seat on this seat (refit it once  
the child seat has been removed),  
– pass the strap of the child seat over the top  
of the seat backrest, centring it between the  
openings for the head restraint rods,  
– attach the hook of the upper strap to rear  
ring B,  
The vehicle has been approved in accordance  
with the latest ISOFIX regulation.  
If fitted on the vehicle, the regulation ISOFIX  
mountings are identified by labels.  
There are three rings for each seat:  
– Two front rings A, located between the vehicle  
seat backrest and cushion, indicated by an  
"ISOFIX" marking,  
– If fitted to your vehicle, a rear ring B, located  
behind the vehicle's seat, called Top Tether, for  
securing the upper strap, indicated by a "Top  
Tether" marking.  
* On some versions, the central seat is not  
equipped with ISOFIX mountings.  
– tighten the upper strap.  
The Top Tether secures the upper strap of child  
seats fitted with them. In case of frontal impact,  
112  
Safety  
Incorrect installation of a child seat in a  
vehicle can compromise a child's safety  
in the event of an accident.  
Strictly follow the fitting instructions provided  
in the installation guide supplied with the child  
seat.  
5
"RÖMER Duo Plus ISOFIX"  
(size category: B1)  
Group 1: from 9 to 18 kg  
Recommended ISOFIX  
child seats  
Suitable for forward-facing installation only.  
Attached to rings A and ring B, referred to as  
TOP TETHER, using an upper strap.  
Three seat body angles: sitting, reclining,  
lying down.  
Also consult the user guide from the child  
seat’s manufacturer to find out how to  
install and remove the seat.  
This child seat can also be used in seat  
positions not equipped with ISOFIX  
mountings. In this case, it must be secured to  
the vehicle's seat by the three-point seat belt.  
Adjust the front seat of the vehicle so that the  
child's feet do not touch the backrest.  
"RÖMER Baby-Safe and its ISOFIX base"  
(size category: E)  
Group 0+: from birth to 13 kg  
Installed "rearward facing" using an ISOFIX  
base which is attached to rings A.  
The base has a support leg, height-  
adjustable, which rests on the vehicle's floor.  
This child seat can also be secured with a  
seat belt. In this case, only the shell is used  
and attached to the vehicle seat using the  
three-point seat belt.  
113