Dashboard instruments
On versions fitted with an electric gauge,
the engine oil level status is displayed on the
instrument panel for a few seconds when the
ignition is switched on, after the servicing
information.
Consult a CITROËN dealer or a qualified
workshop.
Trip distance recorder
This measures the distance travelled since it
was last reset by the driver.
1
In the event of a malfunction of the
electric gauge, the oil level is no longer
monitored.
Resetting the trip recorder
The level read will only be correct if
the vehicle is on level ground and the
engine has been off for more than 30
minutes.
If the system is faulty, you must check the
engine oil level using the manual dipstick
located in the engine compartment.
For more information on Checking levels,
refer to the corresponding section.
Oil level correct
This is indicated by the display of "OIL OK" or
by the message "Oil level correct" (depending
on the instrument panel).
Distance recorders
Total distance recorder
The total distance recorder measures the total
distance travelled by the vehicle since its initial
registration.
With the ignition on, the total distance is
displayed at all times. It remains displayed for
30 seconds after switching off the ignition. It is
displayed when the driver's door is opened, and
when the vehicle is locked or unlocked.
►ꢀ With the ignition on, press successively the
button on the end of the wiper control stalk.
►ꢀ Once the correct menu is displayed, make a
long press to reset to zero.
Low oil level
This is indicated by the display of "OIL" or by
the message "Oil level incorrect" (depending
on the instrument panel), accompanied by the
lighting of the Service warning lamp and an
audible signal.
If a low oil level is confirmed by a check using
the dipstick, the level must be topped up to
avoid damage to the engine.
Power indicator (Hybrid or
Electric)
The power indicator shows in real time the
power demanded from the vehicle.
There are 3 zones:
When travelling abroad, you may have
to change the distance units (miles or
km): the displayed speed must be in the local
country’s official unit (mph or km/h).
The unit is changed via the screen's
configuration application, with the vehicle
stationary.
For more information on Checking levels, refer
to the corresponding section.
Oil gauge malfunction
This is indicated by the display of "OIL_ _"
or by the message "Oil level measurement
invalid" (depending on the instrument panel),
accompanied by the lighting of the Service
warning lamp and an audible signal.
19
English 
