Ease of use and comfort -> Boot fittings for Your Citroen C3 Aircross SUV Second Generation (2024-2026)

Ease of use and comfort  
7-seater version  
Boot fittings  
3
5-seater version  
To remove the load space cover shelf:  
►ꢀ Unhook the two cords.  
►ꢀ Raise the movable section slightly.  
►ꢀ Unclip the fixed section on each side, then  
take out the load space cover shelf.  
1. Rear cover shelf  
2. Hooks  
1. Rear cover shelf  
2. Hooks  
3. Lighting  
4. Open storage bins  
Tool box (depending on version)  
5. Stowing rings  
In the event of sudden deceleration,  
objects placed on the load space cover  
shelf can turn into projectiles.  
3. Lighting  
4. Armrest with cup holder  
5. USB socket  
6. Open storage bins  
Tool box  
7. Stowing rings  
Hooks  
They are used to hang shopping bags.  
6. Boot carpet or 2-position boot floor  
7. Tool box (depending on version)  
8. Removable protective sub-floor  
Take care to only hang lightweight  
bags.  
Load space cover shelf  
It consists of two sections:  
2-position boot floor  
– a fixed section with an open storage space.  
– a movable section which rises when the boot  
is opened, with an open storage space.  
(Depending on version)  
This 2-position floor allows the boot volume to  
be optimised using the lateral stops located on  
the sides:  
51  
Ease of use and comfort  
– High position (100 kg max.): to obtain a flat  
floor up to the front seats, when the rear seats  
are folded down.  
– Low position (150 kg max.): maximum boot  
volume.  
Boot lamp  
It comes on automatically when the boot is  
opened and goes off automatically when the  
boot is closed.  
The lighting time varies according to the  
circumstances:  
– When the ignition is off, approximately  
10 minutes.  
– In energy saving mode, approximately  
30 seconds.  
– With the engine running, unlimited.  
On certain versions, the adjustable  
boot floor cannot be fitted in the low  
position.  
To change the height:  
►ꢀ Lift and pull the floor towards you using its  
central handle, then use the lateral stops to  
move it.  
►ꢀ Push the floor all the way forwards to place  
it in the desired position.  
To keep it in the inclined position:  
►ꢀ From the high position, lift the floor towards  
the boot.  
►ꢀ Engage it in the inclined position in the  
lateral stops to secure it in this position.  
52