Practical information
Changing a fuse
Procedure for replacing a faulty fuse with a new fuse to rectify a failure of the corresponding function.
Access to the tools
Changing a fuse
Installing electrical
before changing a fuse, the cause of the failure
accessories
must be identified and rectified.
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
F
Identify the failed fuse by checking the
condition of its filament.
before installing other electrical
equipment or accessories on your
vehicle, contact a CITRoËn dealer or a
qualified workshop.
CITROËN will not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying malfunctions
resulting from the installation of
accessories not supplied and not
recommended by CITRoËn and
not installed in accordance with its
instructions, in particular when the
combined consumption of all of the
additional equipment connected
exceeds 10 milliamperes.
The extraction tweezer and the spare fuses are
located on the back of the dashboard fusebox
cover.
Failed
Good
For access to them:
F
F
F
unclip the cover by pulling the side,
remove the cover completely,
remove the tweeezer.
F
F
F
Use the special tweezer to extract the fuse
from its housing.
Always replace the faulty fuse with a fuse
of the same rating.
Check the correspondence between the
number marked on the box, the rating
marked on the fuse and the tables below.
11
185
English 
