Advertisement

Advertisement

CITRO?N Connect Nav -> First steps for Your Citroen C3 SUV Third Generation (2016-2024)

CITROËN Connect Nav  
applications interrupt their display while the  
vehicle is moving).  
– Changing the system settings and  
configuration.  
Depending on the model, use the "Source" or  
"Menu" buttons on the left of the touch screen  
for access to the menus, then press the virtual  
buttons in the touch screen.  
CITROËN Connect Nav  
You can display the menus at any time by  
pressing the screen briefly with three fingers.  
All of the touch areas of the screen are white.  
Press the cross to go back a level.  
The system is protected so that it only  
operates in the vehicle.  
The message Energy Economy Mode is  
displayed when the system is about to enter  
the corresponding mode.  
Press "OK" to confirm.  
The touch screen is of the "capacitive"  
type.  
System and map updates can be  
downloaded from the Brand’s website.  
The update procedure is also available on the  
website.  
To clean the screen, use a soft, non-abrasive  
cloth (e.g. spectacles cloth) with no additional  
product.  
Do not use sharp objects on the screen.  
Do not touch the screen with wet hands.  
GPS navigation -  
Applications - Multimedia  
audio system - Bluetooth®  
telephone  
The system’s Open Source Software  
(OSS) source codes are available at the  
following addresses:  
Certain information is displayed permanently in  
the upper band of the touch screen:  
– Reminder of the air conditioning information  
(depending on version), and direct access to the  
corresponding menu.  
The functions and settings described  
vary according to the vehicle version and  
configuration.  
– Go directly to the selection of the audio  
source, to the list of radio stations (or list of titles  
depending on the source).  
– Go to the message notifications, emails, map  
updates and, depending on the services, the  
navigation notifications.  
For safety reasons and because they  
require sustained attention by the driver,  
the following operations must be carried out  
with the vehicle stationary and the ignition  
on:  
– Pairing the smartphone with the system in  
Bluetooth mode.  
– Using the smartphone.  
First steps  
With the engine running, a press mutes  
the sound.  
With the ignition off, a press turns the system on.  
Adjustment of the volume.  
– Go to the settings for the touch screen and the  
digital instrument panel.  
Use the buttons either side of or below the touch  
screen for access to the menus, then press the  
virtual buttons in the touch screen.  
– Connection to the CarPlay®, MirrorLinkTM  
or Android Auto applications (certain  
162