2022-2025 Citroen C3 SUV In The Event of a Breakdown User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

In The Event of a Breakdown for Your Citroen C3 SUV Fourth Generation (2022-2025)

Practical Information  
requiring special products (such as tar or  
insect removers).  
Preferably, have paint touch-ups performed  
by a CITROËN dealer or a qualified  
workshop.  
Gently wipe the bodywork with a clean  
microfibre cloth.  
Apply polish with the vehicle clean and dry.  
Comply with the instructions for use stated  
on the product.  
Advice on care and  
maintenance  
General recommendations  
Interior  
Decals  
Observe the following recommendations to  
avoid damaging the vehicle.  
(Depending on version)  
Warning  
When washing the vehicle, never use a  
water hose or high-pressure jet to clean the  
interior.  
Exterior  
Warning  
Do not use a high-pressure washer  
to clean the vehicle - risk of damaging or  
detaching the decals!  
Warning  
Liquids carried in cups or other open  
containers can spill, presenting a risk of  
damage to the instruments and controls and  
the controls located on the centre console.  
Be vigilant! To clean instrument panels,  
touch screens or other displays, wipe gently  
with a soft, dry cloth. Do not use products  
(e.g. alcohol, disinfectant) or soapy water  
directly on these surfaces - risk of damage!  
Never use a high-pressure jet wash in  
the engine compartment - risk of damaging  
the electrical components!  
Do not wash the vehicle in bright sunshine  
or extremely cold conditions.  
Tip  
Use a high-flow hose (temperature  
between 25°C and 40°C).  
Place the jet of water perpendicular to the  
surface to be cleaned.  
Tip  
When washing the vehicle in an  
Rinse the vehicle with demineralised water.  
automatic roller-brush car wash, be sure to  
lock the doors and, depending on version,  
move the electronic key away.  
When using a pressure washer, keep the jet  
nozzle at a minimum distance of 30 cm from  
the vehicle (particularly when cleaning areas  
containing chipped paint, sensors or seals).  
Promptly clean up any stains containing  
chemicals liable to damage the vehicle's  
paintwork (including tree resin, bird  
droppings, insect secretions, pollen and tar).  
Depending on the environment, clean the  
vehicle frequently to remove salty deposits  
(in coastal areas), soot (in industrial areas)  
and mud/salts (in wet or cold areas). These  
substances can be highly corrosive. Contact  
a CITROËN dealer or a qualified workshop  
for advice on removing stubborn stains  
Textile  
Bodywork  
The dashboard, door panels and seats may  
contain parts made of textile material.  
High-gloss paint  
Warning  
Maintenance  
Do not use abrasive products, solvents,  
petrol or oil to clean the bodywork.  
Never use an abrasive sponge to clean  
stubborn stains - risk of scratching the  
paintwork!  
Warning  
Do not use aggressive cleaning  
products (e.g. alcohol, solvent or ammonia).  
Do not use steam-cleaning systems - risk of  
affecting the adhesion of the fabrics!  
Do not apply polish in strong sunshine, or to  
plastic or rubber parts.  
Tip  
Tip  
Remove dust from the textile parts  
regularly with a dry cloth, soft brush or  
vacuum cleaner.  
Use a soft cloth and soapy water or a  
pH neutral product.  
100  
Practical Information  
Rub down the textile parts once per year  
with a clean, damp cloth. After leaving  
overnight to dry, brush with a soft-bristled  
brush.  
-
Hair gel, coffee, tomato sauce, vinegar:  
clean with lukewarm water and lemon  
juice.  
7
For solid substances, then use a soft brush or  
vacuum cleaner.  
For liquid substances, then use a damp  
microfibre cloth and then dry with another  
cloth.  
Stain removal  
Warning  
Do not rub the stain or it may  
spread or you may cause the substance to  
penetrate the surface.  
Leather  
Leather is a natural product. Appropriate  
regular care is essential for its durability.  
It must be protected and nourished using a  
specific leather product, to keep it supple and  
preserve its original appearance.  
Tip  
Act quickly by reducing the stain from  
its edges inwards.  
Remove as much substance or solids as  
possible using a spoon or spatula, and  
remove as much liquid as possible using  
absorbent paper.  
Warning  
Do not use maintenance products  
which are not suitable for cleaning leather  
(e.g. solvent, detergent, petrol, pure alcohol).  
Do not use bleaching or colour-removal  
products (e.g. perchloroethylene).  
When cleaning items partly made from  
leather, take care not to damage the other  
materials with the specific leather product.  
Tip  
Product/Procedure to use depending  
on the type of stain:  
-
Grease, oil and ink: clean with a pH-  
neutral detergent.  
-
-
Vomit: clean with sparkling mineral water.  
Blood: spread flour over the stain and  
allow to dry; remove with a slightly damp  
cloth.  
Tip  
Before cleaning greasy stains or  
liquids, quickly mop up any surplus.  
Before cleaning, wipe off any residues liable  
to scuff the leather, using a cloth that has  
been dampened with demineralised water  
and thoroughly wrung out.  
Clean the leather, without rubbing too  
vigorously, using a soft cloth moistened with  
soapy water or a pH-neutral product.  
Dry with a soft, dry cloth.  
-
-
-
Mud: allow to dry and then remove with a  
slightly damp cloth.  
Cake, chocolate, ice cream: clean with  
lukewarm water.  
Sugary and/or alcoholic drinks: clean with  
lukewarm water, or lemon juice if the  
stain is persistent.  
101  
In The Event of a Breakdown  
Depends upon version  
3.  
4.  
Wheel wrench to re-  
move wheel bolts.  
Tool kit  
Temporary puncture repair kit  
Set of tools supplied with the vehicle.  
Removable towing  
eye.  
Accessing the tools  
For more information on Towing the vehicle  
and using the removable towing eye, refer to  
the corresponding section.  
5
Warning  
These tools are specific to the vehicle  
and may vary according to the level of  
equipment.  
Do not use them for any other purpose.  
Warning  
The tools are located under the boot floor  
carpet, with the spare wheel.  
The jack must only be used to change  
a wheel with a damaged or punctured tyre.  
Do not use any jack other than the one  
supplied with the vehicle. If the vehicle  
does not have its original jack, contact a  
CITROËN dealer. The jack does not require  
any maintenance.  
5.  
12 V compressor  
with cartridge of seal-  
ant, connectors, ca-  
ble, connection hose  
and speed limit stick-  
er For temporary re-  
pair of a tyre and to  
adjust the tyre pres-  
sure.  
List of tools  
With spare wheel  
Warning  
Strictly follow the specified sequence,  
otherwise the sealant may escape under  
high pressure.  
The system contains one air hose, which  
shall be used together with the sealant  
bottle and with standalone compressor,  
when tire pressure adjustment is required.  
Do not throw away the hose after usage;  
place it back into the compressor housing.  
1.  
Jack to lift the vehi-  
cle.  
2.  
Jack handle.  
102  
In The Event of a Breakdown  
For more information on the Temporary  
puncture repair kit, refer to the corresponding  
section.  
Only use the temporary puncture repair kit  
for sealing/inflation passenger car tires. Only  
punctured areas located within the thread  
region or shoulder of the tire can be sealed  
using the temporary puncture repair kit.  
Tip  
8
It is recommended that you use the  
sealant from a CITROËN dealer or a qualified  
workshop.  
The sealant on the tire pressure valve and  
wheel should be removed when you replace  
the tire with a new one and we recommend  
that the tire pressure valve be inspected by a  
CITROËN dealer or qualified workshop.  
Temporary puncture  
repair kit  
Tip  
The temporary puncture repair kit is  
not designed or intended as a permanent  
tire repair method and is to be used for one  
tire only.  
Tip  
Visit this link to view explanatory  
videos: https://shorturl.at/EVOSi  
Repair procedure  
Tip  
Warning  
For more information on the Tool kit,  
refer to the corresponding section.  
Do not remove any foreign body (e.g.  
nail, screw) which has penetrated the tyre.  
Made up of a compressor and a sealant  
cartridge, it allows you to carry out a temporary  
repair of the tire so that you can drive to the  
nearest garage.  
It is designed to repair most punctures located  
on the tyre tread.  
-
-
Park the vehicle without obstructing traffic  
and apply the parking brake.  
Tip  
Tyre inflation pressures are indicated  
on this label.  
For more information on Identification  
markings, particularly this label, refer to the  
corresponding section.  
Follow the safety instructions (hazard  
warning lamps, warning triangle, high  
visibility jacket, etc.) according to the  
legislation in force in the country in which  
you are driving.  
TIRE AND LOADING INFORMATION  
Warning  
-
-
Switch the ignition off.  
Do not use the tire sealant after the  
sealant has expired. Sealing performance can  
be compromised.  
TIRE  
TIRE PRESSURE  
Uncoil the pipe stowed under the  
compressor.  
FRONT  
REAR  
xxx kPa xx psl  
xxx kPa xx psl  
Warning  
Warning  
The speed limit sticker must be affixed  
inside the vehicle in the area close to the  
driver, to remind them that a wheel is in  
temporary use.  
Do not use the temporary puncture  
repair kit:  
Tip  
The pressure may show higher than  
actua reading when the compressor is  
running.  
To get an accurate tire pressure, the  
compressor needs to be turned off.  
– To repair punctures in the tire walls.  
– If a tire is severely damaged by driving run  
flat or with insuficient air pressure.  
– If two or more tires are flat.  
– If the wheel is damaged.  
This can result in an accident.  
103  
In The Event of a Breakdown  
Repairing the tyre  
Warning  
The sealant product is harmful if  
swallowed and causes irritation to the eyes.  
Keep this product out of the reach of  
children.  
In case of skin contact with the sealant,  
wash the area thoroughly with plenty of  
water.If the irritation persists, seek medical  
attention.  
-
-
-
Uncoil the electric cable stowed under the  
compressor.  
1/4  
Connect the compressor's electric plug to  
the vehicle's 12 V socket.  
Switch the ignition on.  
In case of eye contact with sealant, flush  
your eyes for at least 15 minutes. If the  
irritation persists, seek medical attention.  
In case of swallowing the sealant,rinse the  
mouth and drink plenty of water.However,  
never give anything to an unconscious  
person and seek medical attention  
immediately.  
-
Turn the bottle of sealant and gently screw  
-
Switch on the compressor by moving the  
switch to position "I" until the tyre pressure  
reaches 1.8 bar. The sealant product is  
injected under pressure into the tyre; do not  
disconnect the pipe from the valve during  
this operation (risk of blowback).  
it to the output valve of the compressor by  
1/  
4 clockwise.  
Warning  
The use-by date of the fluid is marked  
on the bottle.  
After use, do not discard the bottle into the  
environment; take it to a CITROËN dealer or  
an authorised waste disposal site.  
Do not forget to obtain a new bottle of  
sealant, available from a CITROËN dealer or a  
qualified workshop.  
Warning  
If after approximately 15 minutes, the  
pressure of 1.8 bar is not reached, this  
indicates that the tyre is not repairable;  
contact a CITROËN dealer or a qualified  
workshop for assistance.  
-
Connect the air hose to the bottle of  
sealant by gently turning /4 clockwise.  
1
-
-
Remove the vlave cap from the tyre to be  
repaired,and place in clean place.  
-
-
Move the switch to position "O".  
Disconnect the compressor's electric plug  
from the vehicle's 12 V socket.  
Carefully connect the air hose connector  
to the valve of the tyre to be repaired by  
turning clockwise.  
-
-
-
Remove the kit.  
Refit the cap on the valve.  
Remove and store the bottle of sealant.  
-
Check all connections  
104  
In The Event of a Breakdown  
Warning  
8
It is possible that some tires, especially  
with larger punctures or damage to the  
sidewall, cannot be sealed completely.  
Air pressure loss in the tire may adversely  
affect tire perfomance.  
For this reason, you should avoid abrupt  
steering or other driving maneuvers,  
especially if the vehicle is heavily loaded or  
if a trailer is in use.  
-
Carefully connect the air hose connector  
to the valve of the tyre to be repaired by  
turning clockwise.  
-
-
Drive immediately for approximately 3 miles  
(5 kilometres) at reduced speed (between 12  
and 37 mph (20 and 60 km/h)) to plug the  
puncture.  
-
-
Check all connections.  
Warning  
Connect the compressor's electric plug to  
the vehicle's 12 V socket.  
While driving, if you experience any  
unusual vibration, ride distrubance or noise,  
reduce your speed and drive with caution  
until you can safely pull off the vehicle on  
the side of road.  
Stop to check the repair and the tyre  
pressure using the kit:  
-
-
Switch the ignition on.  
Start the compressor by placing the switch  
at position "I" and adjust the pressure  
to the value shown on the vehicle's tyre  
pressure label. To deflate: press the black  
button located on the compressor pipe,  
near the valve connection.  
●
If the tyre pressure is incorrect, contact  
a CITROËN dealer to have the tyre  
changed.  
Contact a CITROËN dealer or a qualified  
workshop.  
●
If the tyre pressure is correct, drive a  
second time for approximately 3 miles (5  
kilometres) at reduced speed (between  
12 and 37 mph (20 and 60 km/h)), stop  
then check again the tyre pressure using  
the kit to confirm the effective repair of  
the tyre.  
Checking/adjusting tyre  
pressures  
Warning  
If after approximately 15 minutes, the  
pressure is not reached, the tyre is damaged;  
contact a CITROËN dealer or a qualified  
workshop for assistance.  
The compressor can be used, without injecting  
sealant, to check and, if necessary, adjust the  
tyre pressures.  
Warning  
-
-
Uncoil air hose.  
With a tyre repaired using this type of  
-
Once the correct pressure is reached, put  
the switch in position "O".  
Uncoil the cable stowed under the  
compressor.  
kit, do not exceed a speed of 50 mph (80  
km/h) and do not drive more than 620 miles  
(1000 km).  
You must contact a CITROËN dealer or  
a qualified workshop to have the repair  
checked and the tyre changed.  
-
-
Remove the kit and stow it.  
Refit the cap on the valve.  
-
-
Connect to air hose to the bottle of sealant  
by gently turning 1/ clockwise.  
4
Remove the valve cap from the tyre to be  
repaired, and place it in clean place.  
105  
In The Event of a Breakdown  
► Rotate the fixing screw to unlock the jack on  
one end.  
► Tilt the jack towards the right and lift it from  
Wheel nuts removal pattern  
Spare wheel  
Access to the spare wheel  
the rear.  
The spare wheel is installed in the boot, under  
the floor carpet.  
Removing a wheel  
Warning  
Removing the spare wheel  
Parking the vehicle  
Immobilise the vehicle where it does  
not obstruct traffic: the ground must  
be level, stable and non-slippery. With a  
manual gearbox, engage first gear to lock  
the wheels, apply the parking brake and  
switch off the ignition. Check for the  
fixed illumination of the parking brake  
indicator lamps in the instrument panel.  
The occupants must get out of the vehicle  
and wait where they are safe. If necessary,  
place a chock under the wheel diagonally  
opposite the wheel to be changed. Never go  
underneath a vehicle raised using a jack; use  
an axle stand.  
Loosen the nuts on the wheel in diagonal  
sequence. Do not remove wheel nuts.  
► Rotate the fixing screw to unlock the spare  
wheel.  
► Lift the spare wheel towards you from the  
rear.  
► Take the wheel out of the boot.  
Extend jack 1 with the jack handle 2 and wheel  
wrench 3 until its head comes into contact with  
jacking point A or B; contact area A or B on  
the vehicle must be properly inserted into the  
central part of the head of the jack.  
Tip  
Removing the jack  
Wheel with wheel trim  
When removing the wheel, first remove the  
wheel trim by pulling at the valve aperture.  
When refitting the wheel, refit the wheel  
trim, starting by placing its aperture in line  
with the valve and then pushing it into place  
all round its edge with the palm of your  
hand.  
► Raise the vehicle until there is sufficient  
space between the wheel and the ground  
to admit the spare (not punctured) wheel  
easily.  
Warning  
Ensure that the jack is stable. If the  
ground is slippery or loose, the jack may  
106  
In The Event of a Breakdown  
slip or collapse - risk of injury! Take care  
to position the jack strictly at one of the  
jacking points A or B under the vehicle,  
ensuring that the head of the jack is centred  
under the contact area of the vehicle.  
Otherwise, there is a risk of damage to the  
vehicle and/or of the jack collapsing - risk of  
injury!  
Fit the wheel on the hub.  
Putting the spare wheel  
back in place  
-
-
Screw in the bolts by hand as far as possible.  
8
Pre-tighten the bolts using the wheel  
wrench 3 only.  
Put the spare wheel back in its housing.  
Lower the vehicle again fully.  
► Tighten the spare wheel fixing screw by a  
few turns.  
► Fold jack 1 and remove it.  
After changing a wheel  
Remove the bolts and store them in a clean  
place.  
Warning  
► Remove the wheel.  
Alloy wheel can't be tight when we put  
inside the spare wheel area - if get puncher .  
Fitting a wheel  
Warning  
When fitted with a temporary spare  
wheel, it is to be noted that it is only  
for temporary emergency use, until the  
conventional wheel can be repaired or  
replaced. Continuous use of this spare can  
result in tyre failure and loss of control.  
Always observe these precautions when  
using this spare:  
Tighten the bolts using the wheel wrench 3  
only.  
Refit the bolt cover (depending on equipment).  
Store the tools.  
– Your vehicle will respond differently with  
this temporary spare.  
– Do not exceed 80 km/h speed.  
107  
In The Event of a Breakdown  
– Replace this spare with a standard tyre and  
wheel as soon as possible.  
– Use of this spare will reduce ground  
clearance.  
– Set the specified tyre pressure indicated  
on the tyre information label located on the  
driver's door lock pillar.  
– Do not use tyre chains on the temporary  
spare. If you must use tyre chains, rearrange  
the wheels so standard tyres and wheels are  
fitted to the front axle.  
– The temporary spare wheel has a much  
shorter tread life than the conventional  
wheels on your vehicle. Replace the tyre as  
soon as possible as the tread wear indicator  
appears.  
Warning  
Warning  
The headlamps have polycarbonate  
lenses with a protective coating:  
– Do not clean them with a dry or  
abrasive cloth, nor with detergent or  
solvent products.  
Opening the bonnet / Accessing the  
bulbs  
With the engine warm, proceed with caution  
- risk of burns!  
Take care with objects or clothing that could  
be caught in the blades of the cooling fan -  
risk of strangulation!  
– Use a sponge and soapy water or a pH  
neutral product.  
– When using a high-pressure washer on  
persistent marks, do not keep the lance  
directed towards the headlamps, lamps or  
their edges for too long, so as not to damage  
their protective coating and seals.  
Warning  
The inflation pressure of the temporary  
spare wheel should be checked at least  
monthly. At the same time, check that the  
tyre is stored securely. If it is not, tighten  
it. Note that two or more temporary spare  
wheels should not be used on one vehicle  
simultaneously.  
Changing a bulb must only be  
Tip  
done with the ignition off and after the  
headlamp / lamp has been switched off for  
several minutes - risk of serious burns! Do  
not touch the bulb directly with your fingers;  
use a lint-free cloth.  
It is essential only to use anti-ultraviolet  
(UV) type bulbs, so as not to damage the  
headlamp.  
Halogen bulbs (Hx)  
To ensure good quality lighting, check  
that the bulb is correctly positioned in its  
housing.  
Light-emitting diode (LED)  
headlights and lights  
Changing a bulb  
Always replace a failed bulb with a new bulb  
of the same type and specification. To avoid  
lighting imbalance, replace the bulbs in pairs.  
Tip  
Depending on version, the affected types of  
headlamps / lamps are:  
– Daytime running lamps /Position lamps.  
–Beam headlamps.  
– Number plate lamps.  
– Boot Lamp.  
In some weather conditions (e.g.  
low temperature or humidity), misting on  
the internal surface of the glass of the  
headlamps and rear lamps is normal, and will  
disappear after the lamps have been on for a  
few minutes.  
Tip  
Refitting the light units  
Perform the operations in the reverse order  
to dismantling.  
Warning  
Light emitting diodes (LED)  
For the replacement of this type of bulb, you  
must contact a CITROËN dealer.  
108  
In The Event of a Breakdown  
Daytime running lamps/position lamps  
Do not touch the LED technology lamps -  
risk of electrocution!  
1. Daytime running lamps/position lamps  
(LED)  
8
2. Direction indicators (PY21W - 12V - 21W)  
3. Beam headlamps (H4 - 12V - 60/55W)  
4. Front foglamps (H16 - 19W)  
Front lamps  
Model 1  
Model 3  
► Turn the bulb holder a quarter of a turn and  
pull it out.  
► Pull the bulb out and change it.  
Direction indicators  
Tip  
Rapid flashing of a direction indicator  
lamp (left or right) indicates that one of the  
bulbs on the corresponding side has failed.  
1. Position Lamp (W5W - 12V)  
2. Direction indicators (PY21W - 12V - 21W)  
3. Beam headlamps (H4 - 12V - 60/55W)  
Model 2  
1. Daytime running lamps/position lamps  
(LED)  
2. Direction indicators (PY21W - 12V - 21W)  
3. Beam headlamps (LED)  
Turn the bulb holder a eighth of a turn  
anticlockwise and remove it.  
4. Front foglamps (H16 - 19W)  
► Remove the bulb and replace it.  
Tip  
Amber coloured bulbs, such as the  
direction indicators, must be replaced  
by bulbs with identical colour and  
specifications.  
109  
In The Event of a Breakdown  
► Release the snap fit, rotate anticlockwise  
Beam headlights  
2. Direction indicators (PY21W - 12V - 21W)  
3. Reversing light (P21W - 12V - 21W)  
and remove the bulb.  
Rear lamps  
4. Additional sidelights (W3W - 12V - 3W)  
5. Connecting tail lights (W3W - 12V - 3W)  
Model 1  
Changing bulbs  
These bulbs are changed after removing the tail  
lamp assembly.  
Open the boot.  
Remove the protective cover by pulling on the  
tab.  
► Disconnect the bulb connector.  
► Release the retaining tab.  
► Unscrew the nut and remove it. Be careful  
not to drop it inside the wing.  
► Change the bulb taking care to align the  
► Unclip the lamp unit and carefully extract it  
metal part with the grooves on the lamp.  
pulling straight towards the outside.  
► Reposition the retaining tab.  
► Reconnect the bulb connector.  
A standard pair of pliers or the wheel wrench  
(depending on equipment) may be necessary to  
remove the nut.  
1. Sidelamps / Brake lights (P21/5W - 12V -  
► Ensure that the cover is refitted correctly all  
21W/5W)  
around to ensure correct sealing.  
Sidelamps / Brake lights / Reversing  
lights / Direction indicators  
2. Direction indicators (PY21W - 12V - 21W)  
3. Reversing lamp (P21W - 12V - 21W)  
Front foglights (H16-19W)  
(Depending on version)  
Model 2  
Turn the bulb holder a eighth of a turn  
anticlockwise and remove it.  
► Remove the bulb and replace it.  
1. Sidelights / Brake lights (P21/5W - 12V -  
Remove the front mud guard.  
21W/5W)  
► Disconnect the connector.  
110  
In The Event of a Breakdown  
Additional sidelights / Connecting tail lights  
(if equipped)  
Interior lighting  
Changing a fuse  
8
Courtesy light (10W - 12V - 10W)  
Before changing a fuse:  
Identify the cause of the fault and fix it.  
-
-
Switch off all power consumption.  
Identify the defective fuse using the current  
allocation tables and diagrams.  
To replace a fuse, it is essential to:  
Use the special puller to extract the fuse from  
its housing and check the condition of its  
filament.  
Turn the bulb holder a quarter of a turn and pull  
it out.  
► Always replace the failed fuse with a fuse  
of the same rating (same colour); use of  
a different rating may cause malfunctions  
- risk of fire! If the fault recurs soon after  
replacing a fuse, have the electrical system  
checked by a CITROËN dealer.  
► Pull the bulb out and change it.  
Using a thin, flap tip screwdriver, unclip the  
entire console surrounding the courtesy light.  
Rear foglight (LED)  
(Depending on version)  
► Remove the defective bulb and replace it.  
► Fit the console back into place around the  
courtesy light and clip it correctly.  
Tip  
The fuse allocation tables and the  
corresponding diagrams are available from a  
CITROËN dealer.  
Changing a fuse  
Access to the tools  
Warning  
The replacement of a fuse not shown  
in the allocation tables may cause a serious  
malfunction of the vehicle. Contact a  
CITROËN dealer.  
For the replacement of this bulb, contact a  
CITROËN dealer.  
The puller is located inside the engine fuse box.  
Open the bonnet.  
Good  
Faulty  
► Disengage the cover completely.  
► Take the puller from its housing.  
111  
In The Event of a Breakdown  
Dashboard fuses  
The fusebox is placed in the lower dashboard  
(right-hand side).  
Access to the fuses  
Puller  
Tip  
Installing electrical accessories  
The vehicle's electrical system is designed  
to operate with standard or optional  
equipment. Before installing other electrical  
equipment or accessories to your vehicle,  
contact a CITROËN dealer.  
Warning  
CITROËN accepts no responsibility for  
the cost incurred in repairing the vehicle  
or for rectifying malfunctions resulting  
from the installation of accessories not  
supplied or not recommended by CITROËN  
and not installed in accordance with its  
recommendations, in particular when the  
combined power consumption of all of the  
additional equipment connected exceeds 10  
milliamperes.  
Unclip the cover by pulling at the top left, then  
right.  
112  
In The Event of a Breakdown  
For petrol vehicles  
EB2NA- L1(India)  
8
Fuse No.  
Colour  
Red  
Rating (A)  
10  
Functions  
FF01  
FF02  
FF03  
FF04  
On-board diagnosis (OBD-II) / Spare  
connector  
Yellow  
Green  
Yellow  
20  
30  
20  
Body control and cluster module 1  
(BCCM-1)  
Body control and cluster module 2  
(BCCM-2)  
Body control and cluster module 3  
(BCCM-3)  
FF07  
FF08  
FF09  
FF10  
FF12  
FF10  
FS01  
Blue  
Tan  
Blue  
Tan  
Tan  
Tan  
Pink  
15  
5
12 V Socket  
Cabin lamp / Spare connector  
Front wiper and washer  
ECU's ignition  
15  
5
5
Airbag ECU  
5
Switches ignition  
30  
Body Control & Cluster Module 5  
(BCCM-5)  
Relays  
Relay  
Colour  
Brown  
Rating (A)  
20  
Functions  
MICRO  
Ignition Loads  
113  
In The Event of a Breakdown  
EB2NA - L1 (ASEAN & MEA)  
Fuses  
Fuse No.  
FF01  
Colour  
Red  
Rating (A)  
Functions  
10  
On-board diagnosis (OBD-II)  
FF02  
Yellow  
20  
Body control and cluster module 1  
(BCCM-1)  
FF03  
FF04  
FF05  
Green  
Yellow  
Green  
30  
20  
30  
Body control and cluster module 2  
(BCCM-2)  
Body control and cluster module 3  
(BCCM-3)  
Body control and cluster module 4  
(BCCM-4)  
FF06  
FF07  
FF08  
FF09  
FF10  
FF11  
Blue  
Green  
Blue  
Tan  
15  
30  
15  
5
Audio system  
Defogger  
12V Socket  
Spare connector / USB  
Front & rear washer  
ECU's ignition  
Airbag ECU  
Red  
10  
5
Tan  
FF12  
FF13  
FS01  
Tan  
10  
5
Tan  
Switches ignition  
Pink  
30  
Body control and cluster module 5  
(BCCM-5)  
FS02  
Pink  
30  
Body control and cluster module 6  
(BCCM-6)  
114  
In The Event of a Breakdown  
Relays  
8
Relay  
MICRO  
MICRO  
Colour  
Brown  
Brown  
Rating (A)  
Functions  
20  
35  
Ignition Loads  
Defogger  
EB2NA- L2 (India)  
Fuses  
Fuse No.  
Colour  
Red  
Rating (A)  
Functions  
FF02  
FF02  
10  
On-board diagnosis (OBD-II)  
Yellow  
20  
Body control and cluster module 1  
(BCCM-1)  
FF03  
FF04  
FF05  
Green  
Yellow  
Green  
30  
20  
30  
Body control and cluster module 2  
(BCCM-2)  
Body control and cluster module 3  
(BCCM-3)  
Body control and cluster module 4  
(BCCM-4)  
FF06  
FF07  
FF08  
FF09  
FF10  
FF11  
FF12  
FF  
Blue  
Blue  
Tan  
Red  
Tan  
Tan  
Tan  
Tan  
Red  
15  
15  
5
Audio system  
12V Socket  
Spare connector / USB  
Front washer  
ECU's ignition  
Airbag ECU  
10  
5
5
5
Switches ignition  
Service  
5
FF  
10  
Service  
115  
In The Event of a Breakdown  
Fuse No.  
FF  
Colour  
Blue  
Rating (A)  
Functions  
15  
Service  
FS01  
Pink  
30  
Body control and cluster module 5  
(BCCM-5)  
FS02  
Pink  
30  
Body control and cluster module 6  
(BCCM-6)  
Relays  
Relay  
Colour  
Brown  
Rating (A)  
20  
Functions  
MICRO  
Ignition Loads  
EB2NA L2 PACK, EB2LTEM L2 PACK Turbo, EB2LTEM L2 PACK Turbo AT6  
Fuses  
RATING (A)  
FUSE NO  
FF01  
FUSE COLOUR  
Red  
FUNCTIONS  
OBD  
10  
20  
-
FF02  
FF03  
FF04  
FF05  
FF06  
FF07  
FF08  
FF09  
FF10  
Yellow  
-
BCCM-1  
-
Green  
Yellow  
Green  
Tan  
30  
20  
30  
5
BCCM-2  
BCCM-3  
BCCM-4  
ECU'S IGNITION  
FATC ACC  
AIRBAG ECU  
SWITCHES IGNITION  
12V SOCKET  
Tan  
5
Red  
10  
10  
15  
Red  
FF11  
Blue  
116  
In The Event of a Breakdown  
FF12  
FF13  
FF14  
FF15  
FF16  
FS01  
FS02  
FS03  
Blue  
Tan  
15  
5
IVI  
8
SPARE CONNECTOR/USB  
FRONT WASHER  
T-Box  
Red  
10  
5
Tan  
Green  
Pink  
Pink  
Pink  
30  
30  
30  
30  
REAR DEFOGGER  
BCCM-5  
BCCM-6  
ACC FUSE 1  
Relays  
RELAY  
MICRO  
MINI  
RELAY COLOUR  
Brown  
RATING (A)  
Functions  
20  
30  
35  
IGNITION RELAY  
Grey  
ACC RELAY 1 MINI RELAY  
REAR DEFOGGER RELAY  
MICRO  
Brown  
-
-
FF – Fuse of Fast Blow Type  
FS – Fuse of Slow Blow Type  
EB2LTEM AT6 L2 PACK  
Fuses  
RATING (A)  
FUSE NO  
FF01  
FUSE COLOUR  
Red  
FUNCTIONS  
OBD  
10  
FF02  
Yellow  
20  
BCCM-1  
FF03  
-
-
-
FF04  
Green  
Yellow  
30  
20  
BCCM-2  
BCCM-3  
FF05  
117  
In The Event of a Breakdown  
FF06  
FF07  
FF08  
FF09  
FF10  
Green  
Tan  
30  
5
BCCM-4  
ECU'S IGNITION  
FATC ACC  
Tan  
5
Red  
10  
10  
15  
15  
5
AIRBAG ECU  
SWITCHES IGNITION  
12V SOCKET  
IVI  
Red  
FF11  
Blue  
Blue  
Tan  
FF12  
FF13  
SPARE CONNECTOR/USB  
FRONT WASHER  
T-Box  
FF14  
Red  
10  
5
FF15  
Tan  
FF16  
Green  
Pink  
Pink  
Pink  
30  
30  
30  
30  
REAR DEFOGGER  
BCCM-5  
FS01  
FS02  
FS03  
Relays  
RELAY  
MICRO  
MINI  
MICRO  
BCCM-6  
ACC FUSE 1  
RELAY COLOUR  
Brown  
RATING (A)  
FUNCTIONS  
20  
30  
35  
IGNITION RELAY  
Grey  
ACC RELAY 1 MINI RELAY  
REAR DEFOGGER RELAY  
Brown  
118  
In The Event of a Breakdown  
For electric vehicles  
Version 1 (India)  
Fuses  
8
Fuse No.  
Colour  
Red  
Rating (A)  
10  
Functions  
FF01  
On-board diagnosis (OBD-II) / Cabin  
lamp  
FF03  
FF04  
FF05  
FF07  
FF08  
FF09  
FF10  
FF11  
Green  
Yellow  
Yellow  
Tan  
30  
20  
20  
5
(BCCM-2)  
(BCCM-3)  
(BCCM-1)  
ECU's ignition  
Airbag ECU  
Tan  
5
Tan  
5A  
5
Switches ignition  
E-toggle  
Tan  
Tan  
5
T-box  
FF13  
FF14  
FF15  
FS01  
Blue  
Tan  
15  
5
12 V socket  
Cabin lamp / Spare connector  
Front wiper and washer  
Red  
10  
30  
Pink  
Body control and cluster module 5  
(BCCM-5)  
Relays  
Relay  
MICRO  
Colour  
Brown  
Brown  
Rating (A)  
Functions  
Accessory load  
Ignition  
20  
20  
HC MICRO  
119  
In The Event of a Breakdown  
Version 2 (India)  
Fuses  
Fuse No.  
FF01  
Colour  
Red  
Rating (A)  
10  
Functions  
On-board diagnosis (OBD-II) / Cabin  
lamp  
FF02  
FF03  
FF04  
FF05  
Green  
Green  
Yellow  
Yellow  
30  
30  
20  
20  
Body control and cluster module 4  
(BCCM-4)  
Body control and cluster module 2  
(BCCM-2)  
Body control and cluster module 3  
(BCCM-3)  
Body control and cluster module 1  
(BCCM-1)  
FF06  
FF07  
FF08  
FF09  
FF10  
FF11  
Blue  
Tan  
Tan  
Tan  
Tan  
Tan  
Blue  
Tan  
Red  
Pink  
15  
5
IVI  
ECU's ignition  
Airbag ECU  
10A  
10A  
5
Switches ignition  
E-toggle  
5
T-box  
FF13  
FF14  
FF15  
FS01  
15  
5
12 V socket  
Spare connector / USB  
Front wiper and washer  
10  
30  
Body control and cluster module 5  
(BCCM-5)  
FS02  
Pink  
30  
Body control and cluster module 6  
(BCCM-6)  
120  
In The Event of a Breakdown  
Relays  
8
Relay  
MICRO  
MICRO  
Colour  
Brown  
Brown  
Rating (A)  
Functions  
20  
20  
Accessory load  
Ignition  
Version L2 Pack (India)  
Fuses  
Fuse No.  
FF01  
Colour  
Blue  
Rating (A)  
10A  
Functions  
On-board diagnosis (OBD-II)  
FF02  
Green  
30  
Body control and cluster module 4  
(BCCM-4)  
FF03  
FF04  
FF05  
Green  
Yellow  
Yellow  
30  
20  
20  
Body control and cluster module 2  
(BCCM-2)  
Body control and cluster module 3  
(BCCM-3)  
Body control and cluster module 1  
(BCCM-1)  
FF06  
FF07  
FF08  
FF09  
FF11  
Blue  
Tan  
Tan  
Tan  
Tan  
Tan  
Blue  
Tan  
Red  
15  
5
IVI  
ECU's ignition  
Airbag ECU  
10A  
10A  
5
Switches ignition  
E-toggle  
FF12  
FF15  
FF16  
FF17  
5
T-box  
15  
5
12 V socket  
Spare connector and rear USB  
Front and rear washer  
10  
121  
In The Event of a Breakdown  
Fuse No.  
FS01  
Colour  
Pink  
Rating (A)  
30  
Functions  
Body control and cluster module 5  
(BCCM-5)  
FS02  
Pink  
30  
Body control and cluster module 6  
(BCCM-6)  
Relay  
MICRO  
MICRO  
Colour  
Brown  
Brown  
Rating (A)  
Functions  
Accessory load  
Ignition  
20  
20  
Version L2 B2B (India)  
Fuse No.  
FF01  
Colour  
Red  
Rating (A)  
10A  
Functions  
On-board diagnosis (OBD-II) / Cabin  
lamp  
FF02  
FF03  
FF04  
FF05  
Green  
Green  
Yellow  
Yellow  
30  
30  
20  
20  
Body control and cluster module 4  
(BCCM-4)  
Body control and cluster module 2  
(BCCM-2)  
Body control and cluster module 3  
(BCCM-3)  
Body control and cluster module 1  
(BCCM-1)  
FF06  
FF07  
FF08  
FF09  
FF10  
Blue  
Tan  
Tan  
Tan  
Tan  
15  
5
IVI  
ECU's ignition  
Airbag ECU  
Switches ignition  
E-toggle  
5A  
5A  
5
122  
In The Event of a Breakdown  
Functions  
Fuse No.  
FF11  
Colour  
Tan  
Rating (A)  
8
5
15  
5
T-box  
FF13  
Blue  
Tan  
12 V socket  
FF14  
Spare connector / USB  
Front wiper and washer  
FF15  
Red  
10  
30  
FS01  
Pink  
Body control and cluster module 5  
(BCCM-5)  
FS02  
Pink  
30  
Body control and cluster module 6  
(BCCM-6)  
Relays  
Relay  
MICRO  
MICRO  
Colour  
Brown  
Brown  
Rating (A)  
Functions  
Accessory load  
Ignition  
20  
20  
Version L2 PACK ASEAN  
Fuse No.  
FF01  
Colour  
Blue  
Rating (A)  
10A  
Functions  
On-board diagnosis (OBD-II)  
FF02  
Green  
30  
Body control and cluster module 4  
(BCCM-4)  
FF03  
FF04  
FF05  
FF06  
Green  
Yellow  
Yellow  
Blue  
30  
20  
20  
15  
Body control and cluster module 2  
(BCCM-2)  
Body control and cluster module 3  
(BCCM-3)  
Body control and cluster module 1  
(BCCM-1)  
IVI  
123  
In The Event of a Breakdown  
Fuse No.  
FF07  
FF08  
FF09  
FF11  
Colour  
Tan  
Rating (A)  
Functions  
5
10A  
5A  
5
ECU's ignition  
Airbag ECU  
Tan  
Tan  
Switches ignition  
E-toggle  
Tan  
FF12  
Tan  
5
T-box  
FF15  
Blue  
Tan  
15  
5
12 V socket  
FF16  
Spare connector and rear USB  
Front and rear washer  
FF17  
Red  
Pink  
10  
30  
FS01  
Body control and cluster module 5  
(BCCM-5)  
FS02  
Pink  
30  
Body control and cluster module 6  
(BCCM-6)  
Relays  
Relay  
MICRO  
MICRO  
Colour  
Brown  
Brown  
Rating (A)  
Functions  
Accessory load  
Ignition  
20  
20  
124  
In The Event of a Breakdown  
ENGINE COMPARTMENT FUSES  
The fusebox is placed in the engine  
compartment near the battery.  
8
Access to the fuses  
Remove the cover.  
► Change the fuse.  
► When you have finished, close the cover  
carefully then engage the two latches, to  
ensure correct sealing of the fusebox.  
125  
In The Event of a Breakdown  
For petrol vehicles  
EB2NA-L1 (INDIA)  
Engine fuse/relay box  
Fuses  
RATING (A)  
FUSE NO  
FF01  
FUSE COLOUR  
Green  
FUNCTIONS  
ABS ECU  
30  
10  
10  
30  
FF02  
Red  
HVAC Compressor  
Horn  
FF03  
Red  
FF04  
Green  
ECM (ignition coil/Injectors/ Fuel  
Pump)  
FF05  
Blue  
15  
ECM load ( canister valve/ O2 sen-  
sors)  
FF06  
Tan  
5
ECM load (VVT Valve)  
ECM Supply  
Radiator Relay  
CFB-1  
FF07  
Yellow  
Tan  
20  
5
FF08  
FS01  
Black  
Yellow  
Green  
Green  
Green  
60  
60  
40  
40  
40  
FS02  
EPS Motor  
FS03  
ABS Motor  
FS04  
Radiator Fan  
Accessory load  
FS05  
Relays  
RELAY  
MICRO  
MICRO  
RELAY COLOUR  
Brown  
RATING (A)  
FUNCTIONS  
20  
20  
HVAC Compressor Relay  
Horn Relay  
Brown  
126  
In The Event of a Breakdown  
Starter Solenoid Relay  
MICRO  
MICRO  
Brown  
Grey  
20  
35  
8
ECM main Relay  
Spare  
-
-
-
EB2NA- L1 (ASEAN/DMOA)  
Engine fuse/relay box  
Fuse No.  
FF01  
Colour  
Green  
Red  
Rating (A)  
Functions  
ABS ECU  
30  
10  
10  
30  
FF02  
HVAC Compressor  
Horn  
FF03  
Red  
FF04  
Green  
ECM Loads (Ignition Coil / Injec-  
tors / Fuel Pump)  
FF05  
Blue  
15  
ECM Loads (Canister Valve / O2  
Sensors)  
FF06  
FF07  
FF08  
FS01  
FS02  
FS03  
Fs04  
FS05  
Tan  
5
ECM Loads (VVT Valve)  
ECM Power Supply  
Yellow  
Tan  
20  
5
Radiator Fan Relay Coil Supply  
Cabin Fuse Bow Loads (CFB-1)  
Electric Power Steering (EPS) Motor  
ABS Motor  
Black  
Yellow  
Green  
Green  
Green  
80  
60  
40  
40  
40  
Radiator fan  
Accessory load (HVAC Blower/Wip-  
er/Washer)  
Relay  
Colour  
Brown  
Rating (A)  
20  
Functions  
MICRO  
HVAC Compressor  
127  
In The Event of a Breakdown  
Relay  
Colour  
Brown  
Brown  
Grey  
Rating (A)  
Functions  
Horn  
MICRO  
MICRO  
MICRO  
MICRO  
20  
20  
35  
35  
Starter Solenoid  
ECM Main  
Grey  
Vacuum pump  
Engine relay box  
EB2NA- L1 & L2 (India)  
Fuse No.  
FS06  
Colour  
Green  
Rating (A)  
40  
Functions  
Cabin Fuse Box Loads (CFB-2)  
Relay  
MINI  
MINI  
Colour  
Grey  
Rating (A)  
Functions  
40  
40  
Radiator Fan  
Grey  
Accessory load (HVAC Blower/Wip-  
er/Washer)  
MAXI  
Grey  
70  
ECM Power  
EB2NA - L1 (ASEAN)  
Fuse No.  
FS06  
Colour  
Yellow  
Pink  
Rating (A)  
60A  
Functions  
Cabin Fuse Box Loads (CFB-2)  
Vacuum pump  
FS07  
30  
Relay  
MINI  
MINI  
Colour  
Grey  
Rating (A)  
Functions  
40  
40  
Radiator Fan  
Grey  
Accessory load (HVAC Blower/Wip-  
er/Washer)  
MAXI  
Grey  
70  
ECM Power  
128  
In The Event of a Breakdown  
EB2NA-L1 (MEA)  
Fuse No.  
8
Colour  
Yellow  
Pink  
Rating (A)  
Functions  
FS06  
FS07  
40  
30  
Cabin Fuse Box Loads (CFB-2)  
Vacuum pump  
Relay  
MINI  
MINI  
Colour  
Grey  
Rating (A)  
Functions  
40  
40  
Radiator Fan  
Grey  
Accessory load (HVAC Blower/Wip-  
er/Washer)  
MAXI  
Grey  
70  
ECM Power  
EB2NA - Version 2 (India)  
Engine fuse/relay box  
Fuse No.  
FF01  
Colour  
Green  
Red  
Rating (A)  
Functions  
ABS ECU  
30  
10  
10  
30  
FF02  
HVAC Compressor  
Horn  
FF03  
Red  
FF04  
Green  
ECM Loads (Ignition Coil / Injec-  
tors / Fuel Pump)  
FF05  
Blue  
15  
ECM Loads (Canister Valve / O2  
Sensors)  
FF06  
FF07  
FF08  
FS01  
FS02  
Tan  
Yellow  
Tan  
5
ECM Loads (VVT Valve)  
20  
5
ECM Power Supply  
Radiator Fan Relay Coil Supply  
Cabin Fuse Box Loads (CFB-1)  
Electric Power Steering (EPS) Motor  
Black  
Yellow  
80  
60  
129  
In The Event of a Breakdown  
Fuse No.  
FS03  
Colour  
Green  
Green  
Green  
Rating (A)  
Functions  
ABS Motor  
Radiator Fan  
40  
40  
40  
FS04  
FS05  
Accessory Load (HVAC Blow-  
er/Washer)  
Relay  
Colour  
Brown  
Brown  
Brown  
Grey  
Rating (A)  
Functions  
MICRO  
MICRO  
MICRO  
MICRO  
20  
20  
20  
35  
HVAC Compressor  
Horn  
Starter Solenoid  
ECM Main  
Engine relay box  
L2 NA PACK - INDIA  
Fuse No.  
FS06  
Colour  
Green  
Rating (A)  
60A  
Functions  
Cabin Fuse Box Loads (CFB-2)  
Relay  
MINI  
MINI  
Colour  
Grey  
Rating (A)  
Functions  
40  
40  
Radiator Fan  
Grey  
Accessory load (HVAC Blow-  
er/Washer)  
MAXI  
Grey  
70  
ECM Power  
EB2LTEM L2 Turbo AT6 – Version 2 (India)  
Engine fuse/relay box  
Fuse No.  
FF01  
Colour  
Green  
Rating (A)  
30  
Functions  
ABS ECU  
130  
In The Event of a Breakdown  
Functions  
Fuse No.  
FF02  
Colour  
Red  
Rating (A)  
8
10  
10  
30  
HVAC Compressor  
Horn  
FF03  
Red  
FF04  
Green  
ECM Loads (Ignition Coil / Injec-  
tors / Fuel Pump)  
FF05  
Blue  
15  
ECM Loads (Canister Valve / O2  
Sensors)  
FF06  
FF07  
FF08  
FS01  
FS02  
FS03  
FS04  
FS05  
Blue  
Yellow  
Tan  
15  
20  
5
ECM Loads (VVT Valve)  
ECM Power Supply  
Radiator Fan Relay Coil Supply  
Cabin Fuse Box Loads (CFB-1)  
Electric Power Steering (EPS) Motor  
ABS Motor  
Black  
Yellow  
Green  
Yellow  
Green  
80  
60  
40  
60  
40  
Radiator Fan  
Accessory Load (HVAC Blow-  
er/Washer)  
Relay  
Colour  
Brown  
Brown  
Brown  
Grey  
Rating (A)  
Functions  
MICRO  
MICRO  
MICRO  
MICRO  
MICRO  
20  
20  
20  
35  
20  
HVAC Compressor  
Horn  
Starter Solenoid #1  
ECM Main  
Brown  
Starter Solenoid #2  
131  
In The Event of a Breakdown  
EB2LTEM L2 Turbo-(ASEAN/ DMOA)  
Fuses  
RATING (A)  
FUSE NO  
FF01  
FUSE COLOUR  
Green  
FUNCTIONS  
ABS ECU  
30  
15  
-
FF02  
Blue  
HVAC Compressor  
SPARE  
FF03  
Red  
FF04  
Green  
30  
ECM (ignition coil/Injectors/ Fuel  
Pump)  
FF05  
Blue  
15  
ECM load ( canister valve/ O2 sen-  
sors)  
FF06  
FF07  
FF08  
FS01  
FS02  
FS03  
FS04  
FS05  
Blue  
15  
ECM load (VVT Valve)  
ECM Supply  
Radiator Relay  
CFB-1  
Yellow  
Tan  
20  
5
Black  
Yellow  
Green  
Yellow  
Green  
100  
60  
40  
60  
40  
EPS Motor  
ABS Motor  
Radiator Fan  
Accessory load  
Relays  
RELAY  
MICRO  
MICRO  
MICRO  
MICRO  
-
RELAY COLOUR  
Brown  
RATING (A)  
FUNCTIONS  
20  
-
HVAC Compressor Relay  
SPARE  
Brown  
Brown  
20  
35  
Starter Solenoid Relay  
ECM main Relay  
Spare  
Grey  
-
-
132  
In The Event of a Breakdown  
EB2NA- L2 PACK (INDIA)  
Engine fuse/Relay Box  
8
Fuses  
RATING (A)  
FUSE NO  
FF01  
FUSE COLOUR  
FUNCTIONS  
Tan  
5
Radiator Relay  
FF02  
Yellow  
Tan  
20  
5
ECM Supply  
FF03  
ECM load (VVT Valve)  
FF04  
Blue  
15  
ECM (ignition coil/Injectors/ Fuel  
Pump)  
FF05  
Green  
30  
ECM load ( canister valve/ O2 sen-  
sors)  
FF06  
FF07  
FF08  
FS01  
FS02  
FS03  
FS04  
FS05  
-
-
SPARE  
Blue  
15  
HVAC Compressor  
ABS ECU  
Green  
Black  
Yellow  
Green  
Green  
Green  
30  
100  
60  
40  
40  
40  
CFB-1  
EPS Motor  
ABS Motor  
Radiator Fan  
Accessory load  
Relays  
RELAY  
MICRO  
MICRO  
MICRO  
RELAY COLOUR  
RATING (A)  
FUNCTIONS  
Brown  
-
20  
-
HVAC Compressor Relay  
SPARE  
Brown  
20  
Starter Solenoid Relay  
133  
In The Event of a Breakdown  
MICRO  
Grey  
35  
ECM main Relay  
Spare  
-
-
-
EB2LTEM L2 Turbo AT6 (INDIA)  
Fuses  
FUSE NO  
FF01  
FUSE COLOUR  
RATING (A)  
FUNCTIONS  
ECM  
Blue  
Tan  
15A  
5A  
FF02  
EBECB  
STT  
FF03  
Tan  
5A  
FF04  
Blue  
Green  
15A  
40A  
AT6  
FS01  
CFB-2  
Relays  
RELAY  
MINI  
RELAY COLOUR  
RATING (A)  
40A  
FUNCTIONS  
Grey  
Grey  
Accessory Mini Relay  
ECM Power Maxi Relay  
MAXI  
70A  
EB2LTEM L2 PACK Turbo AT6 (INDIA)  
Fuses  
FUSE NO  
FF01  
FUSE COLOUR  
RATING (A)  
FUNCTIONS  
ECM  
Blue  
Tan  
15A  
5A  
FF02  
BECB  
FF03  
Tan  
5A  
STT  
FF04  
Blue  
Yellow  
15A  
60A  
AT6  
FS01  
CFB-2  
134  
In The Event of a Breakdown  
Relays  
RATING (A)  
8
RELAY  
MINI  
RELAY COLOUR  
FUNCTIONS  
Grey  
Grey  
40A  
70A  
Accessory Mini Relay  
ECM Power Maxi Relay  
MAXI  
EB2LTEM AT6 L2 PACK  
Fuse No.  
FF01  
Colour  
Rating (A)  
Functions  
Radiator Relay  
ECM Supply  
ECM  
Tan  
Yellow  
Blue  
5
20  
15  
FF02  
FF03  
FF04  
FF05  
FF06  
FF07  
FF08  
FS01  
Blue  
15  
ECM  
Green  
-
30  
-
ECM  
SPARE  
Blue  
15  
Compressor  
ABS ECU  
Accessory Load  
Radiator Fan  
ABS Motor  
EPS Motor  
CFB-1  
Green  
Green  
Yellow  
Green  
Yellow  
Blue  
30  
40  
60  
40  
60  
100  
FS02  
FS03  
FS04  
FS05  
Relay  
MICRO  
MICRO  
Colour  
Brown  
Grey  
Rating (A)  
Functions  
20  
35  
Starter solenoid Relay Inhabit  
ECM main Relay  
135  
In The Event of a Breakdown  
Relay  
Colour  
Brown  
-
Rating (A)  
Functions  
MICRO  
MICRO  
MICRO  
20  
-
Starter solenoid Relay  
SPARE  
Brown  
20  
HVAC Compressor Relay  
EB2LTEM AT6 L2  
Fuse No.  
FF01  
Colour  
Blue  
Tan  
Rating (A)  
Functions  
ECM  
15  
5
FF02  
FF03  
FF04  
FS01  
BECB  
STT  
Tan  
5
Blue  
Green  
15  
40  
AT6  
CFB-2  
Relay  
MAXI  
MINI  
Colour  
Grey  
Rating (A)  
Functions  
70  
40  
ECM Power Maxi relay  
Accessory Mini relay  
Grey  
EB2LTEM AT6 L2 PACK  
Fuse No.  
FF01  
Colour  
Blue  
Rating (A)  
Functions  
ECM  
15  
5
FF02  
FF03  
FF04  
FS01  
Tan  
BECB  
STT  
Tan  
5
Blue  
15  
60  
AT6  
Yellow  
CFB-2  
136  
In The Event of a Breakdown  
Functions  
Relay  
MAXI  
MINI  
Colour  
Grey  
Rating (A)  
8
70  
40  
ECM Power Maxi relay  
Accessory Mini relay  
Grey  
EB2LTEM L2 Turbo-(ASEAN/ DMOA)  
Engine relay box  
Fuses  
RATING (A)  
FUSE NO  
FF01  
FUSE COLOUR  
FUNCTIONS  
ECM  
Blue  
Tan  
15A  
5A  
FF02  
BECB  
FF03  
Blue  
Yellow  
15A  
60A  
AT6 ECU  
CFB-2  
FS01  
Relays  
RELAY  
MINI  
RELAY COLOUR  
RATING (A)  
40A  
FUNCTIONS  
Grey  
Grey  
Accessory Mini Relay  
ECM Power Maxi Relay  
MAXI  
70A  
-
-
FF – Fuse of Fast Blow Type  
FS – Fuse of Slow Blow Type  
EB2LTEM L2 Turbo- (ASEAN/ DMOA)  
Cabin fuse cum relay box  
Fuses  
FUSE NO  
FF01  
FUSE COLOUR  
Red  
RATING (A)  
FUNCTIONS  
OBD  
10  
FF02  
Yellow  
20  
BCCM-1  
137  
In The Event of a Breakdown  
FF03  
FF04  
FF05  
FF06  
FF07  
FF08  
FF09  
FF10  
FF11  
-
-
-
Green  
Yellow  
Green  
Tan  
30  
20  
30  
5
BCCM-2  
BCCM-3  
BCCM-4  
ECU IGNITION  
FATC ACC  
AIRBAG ECU  
Tan  
5
Red  
10  
5
Red  
SWITCHES IGNITION  
12V SOCKET  
IVI  
Blue  
Blue  
Tan  
15  
15  
5
FF12  
FF13  
FF14  
FF15  
FF16  
FS01  
FS02  
FS03  
SPARE CONNECTOR/USB  
FRONT WASHER  
-
Red  
10  
-
-
Green  
Pink  
30  
30  
REAR DEFOGGER  
BCCM-5  
Pink  
30  
BCCM-6  
Pink  
30  
ACC FUSE 1  
Relays  
RELAY  
MICRO  
MINI  
RELAY COLOUR  
Brown  
RATING (A)  
FUNCTIONS  
20  
30  
35  
IGNITION RELAY  
Grey  
ACC RELAY 1 MINI RELAY  
REAR DEFOGGER RELAY  
MICRO  
Brown  
138  
In The Event of a Breakdown  
For electric vehicles  
India L1/ L2 B2B/ L2  
8
Engine fuse cum relay box  
Fuse No.  
FF08  
FF07  
FF06  
FF05  
FF04  
FF03  
FF01  
Colour  
Green  
Red  
Rating (A)  
Functions  
30  
10  
10  
10  
30  
10  
5
ABS ECU  
Vacuum pump  
Red  
Horn  
Red  
Inverter-1  
Green  
Red  
VCU  
OBC/DC-DC-1  
Tan  
e-Compressor & HVAC  
Radiator Fan Relay Coil Supply  
Cabin Fuse Box Loads (CFB-1)  
Electric Power Steering (EPS) Motor  
ABS Motor  
FF02  
FS01  
Tan  
5
Black  
Yellow  
Green  
Green  
Green  
80  
60  
40  
40  
40  
FS02  
FS03  
FS04  
FS05  
Radiator fan  
Accessory load (HVAC Blower/Wip-  
er/Washer)  
Relay  
Colour  
Brown  
Brown  
Grey  
Rating (A)  
Functions  
Horn  
MICRO  
MICRO  
MICRO  
MICRO  
20  
20  
35  
35  
Cooling pump  
VCU Main  
Vacuum pump  
Grey  
139  
In The Event of a Breakdown  
Engine relay box  
Fuse No.  
FS01  
Colour  
Green  
Green  
Tan  
Rating (A)  
Functions  
40  
30  
5
Cabin Fuse Box Loads (CFB-2)  
Vacuum pump  
Battery Sensor (BECB)  
VCU  
FS02  
FF02  
FF01  
Tan  
5
FF03  
FF04  
FF06  
FF05  
FF07  
FF08  
Red  
10  
10  
10  
5
OBC/DC-DC-2  
Inverter-2  
Red  
Red  
HVBATT  
Tan  
E-service plug  
VCU relay coil  
PDU VIS  
Tan  
5
Tan  
5
Relay  
MINI  
MINI  
Colour  
Grey  
Rating (A)  
Functions  
40  
40  
Radiator fan  
Accessory load  
Grey  
L2 Pack, L2 Pack ASEAN.  
Engine fuse cum relay box  
Relay  
FF01  
FF02  
FF03  
FF04  
Colour  
Tan  
Rating (A)  
Functions  
5
5
HVAC / e-Compressor  
Radiator fan / Cooling pump coil  
OBC/DC-DC-1  
Tan  
Red  
10  
30  
Green  
VCU  
140  
In The Event of a Breakdown  
Functions  
Relay  
FF05  
FF07  
FF08  
FS01  
FS02  
FS03  
FS04  
FS05  
Colour  
Red  
Rating (A)  
8
10  
10  
Inverter-1  
Red  
Vacuum pump  
Green  
Black  
Yellow  
Green  
Green  
Green  
30  
80  
60  
40  
40  
40  
ABS ECU  
Cabin Fuse Box Loads (CFB-1)  
Electric Power Steering (EPS) Motor  
ABS Motor  
Radiator fan  
Accessory load  
Relay  
Colour  
Grey  
Rating (A)  
Functions  
HC MICRO  
HC MICRO  
MICRO  
35  
35  
20  
35  
Vacuum pump  
VCU Main  
Grey  
Brown  
Grey  
Cooling pump  
Rear defogger  
HC MICRO  
Relay  
MINI  
MINI  
Colour  
Grey  
Rating (A)  
Functions  
40  
40  
Radiator fan  
Accessory load  
Grey  
Fuse No.  
FF01  
Colour  
Green  
Rating (A)  
30  
Functions  
Rear defogger  
141  
In The Event of a Breakdown  
from battery can cause blindness or severe  
burns.  
Access to the battery  
12 V battery / Accessory  
battery  
Flush eyes or body with ample water and get  
medical care immediately if suffered.  
Keep batteries out of the reach of children.  
All operations on the battery must be carried  
out in a well ventilated area and away from  
naked flames and sources of sparks, so as to  
avoid any risk of explosion or fire.  
The battery is located under the bonnet.  
Naturally Aspirated engine version  
Lead-acid starter batteries  
Restriction  
These batteries contain harmful  
substances (sulphuric acid and lead).  
They must be disposed of in accordance  
with regulations and must never under any  
circumstances be discarded with household  
waste.  
Wash your hands afterwards.  
Warning  
If the battery fails (after warranty  
coverage), replace it with a battery of the  
same specification as the one used in the  
vehicle.  
Dispose of used batteries at a designated  
collection point.  
(+) Positive terminal.  
(-) Negative terminal.  
Electric vehicles  
Warning  
If the vehicle should remain stationary  
for more than a month, then disconnect the  
negative (-) terminal from the battery post  
and be sure that the battery is fully charged.  
During storage, check that the battery  
charge is adequate.  
Turbo engine version  
Tip  
Flat accessory battery  
It is no longer possible to start the motor or  
recharge the traction battery.  
If you do not disconnect the battery from  
the electrical system, check the battery  
charge every 30 days.  
Whenever you leave the vehicle stationary  
for two weeks or more, idle the engine  
for approximately five minutes, with the air  
conditioning system on and high fan speed.  
Warning  
Precautions before working on the  
accessory battery  
Switch off the ignition and check that the  
vehicle is not being charged.  
(+) Positive terminal.  
A remote earth point is located near the  
battery.  
Warning  
Warning  
Protect your eyes and face before  
handling the battery.  
Jump-starting another vehicle  
Use goggles and gloves while working with  
the battery. Diluted sulphuric acid spilled  
Do not use the accessory battery to jump-  
start another vehicle or to charge another  
vehicle's battery.  
142  
In The Event of a Breakdown  
Electric version  
Make sure that the jump leads are well away  
from the engine’s moving parts (fan, belt,  
etc.).  
Do not disconnect the (+) terminal while the  
engine is running.  
During jump start, extra care should be taken  
to ensure right terminals are connected. If  
terminal connections are reversed, it will  
lead to failure of alternator & other electrical,  
electronic components.  
Never power electrical or electronic  
components directly from battery terminals  
as it will lead to poor battery charging, poor  
performance of components and battery  
sensor malfunction, which will impact fuel  
economy.  
Connect the other end of the green or black  
cable to the (-) terminal of flat battery A.  
8
► Start the engine on the assisting vehicle and  
leave it running for a few minutes.  
► Operate the starter on the broken down  
vehicle and let the engine run.  
If the engine does not start immediately, switch  
off the ignition and wait a few moments before  
trying again.  
Wait for it to return to idle.  
► Disconnect the jump leads in reverse order:  
(+) Positive terminal.  
A remote earth point is located near the  
battery.  
first remove (-) terminal then (+) terminal.  
► Refit the cover to the (+) terminal, if the  
vehicle has one.  
► Allow the engine to run for at least 30  
minutes, with the vehicle stationary, so that  
the battery reaches an adequate state of  
charge.  
Starting using another  
battery  
For Naturally Aspirated engine version  
If the vehicle's battery is flat/drain/discharged,  
the engine can be started using a backup  
battery (either external or from another vehicle)  
and jump leads or using a battery booster.  
For Turbo engine version  
Warning  
Never start the engine by connecting  
a battery charger.  
Never use a 24 V or higher battery booster.  
Check beforehand that the backup battery  
has a nominal voltage of 12 V and a capacity  
at least equal to that of the discharged  
battery.  
Lift the cover on the (+) terminal, if the vehicle  
has one.  
► Connect the red cable to the (+) terminal of  
flat battery A, then to the (+) terminal of the  
backup battery B or of the booster.  
The two vehicles must not be in contact  
with each other.  
Tip  
The negative cable must be connected  
to the car ground (not to the battery  
negative terminal) so that the battery sensor  
Switch off all electricity-consuming  
equipment on both vehicles (audio system,  
wipers, lighting, etc.).  
► Connect one end of the green or black  
cable to the (-) terminal of the backup  
battery B or of the booster (or to an earth  
point on the assisting vehicle).  
143  
In The Event of a Breakdown  
can detect all charging and discharging  
currents.  
ensure READY indication appears on the  
instrument panel.  
If the engine does not start immediately, switch  
off the ignition and wait a few moments before  
trying again.  
Lift the cover on the (+) terminal, if the vehicle  
has one.  
Wait for it to return to idle.  
► Connect the red cable to the (+) terminal of  
flat battery A (at the metal elbow), then to  
the (+) terminal of the backup battery B or  
of the booster.  
► Disconnect the jump leads in reverse order:  
first remove (-) terminal then (+) terminal..  
► Refit the cover to the (+) terminal, if the  
► Connect one end of the green or black  
cable to the (-) terminal of the backup  
battery B or of the booster (or to an earth  
point on the assisting vehicle).  
vehicle has one.  
► Allow the engine to run for at least 30  
minutes, with the vehicle stationary, so that  
the battery reaches an adequate state of  
charge.  
Tip  
The negative cable must be connected  
to the car ground (not to the battery  
negative terminal) so that the battery sensor  
can detect all charging and discharging  
currents.  
Connect the other end of the green or black  
cable to the earth point C on the broken down  
vehicle.  
Warning  
Driving immediately without having  
reached a sufficient level of charge may  
affect some of the vehicle's functionalities.  
► Start the engine on the assisting vehicle and  
leave it running for a few minutes.  
Lift the cover on the (+) terminal, if the vehicle  
has one.  
► Operate the starter on the broken down  
vehicle and let the engine run.  
► Connect the red cable to the (+) terminal of  
flat battery A (at the metal elbow), then to  
the (+) terminal of the backup battery B or  
of the booster.  
Disconnecting/removing the  
battery  
If the engine does not start immediately, switch  
off the ignition and wait a few moments before  
trying again.  
Wait for it to return to idle.  
In order to maintain an adequate state  
of charge for starting the engine, it  
is recommended that the battery be  
disconnected if the vehicle is taken out of  
service for a long period.  
► Connect one end of the green or black  
cable to the (-) terminal of the backup  
battery B or of the booster (or to an earth  
point on the assisting vehicle).  
► Disconnect the jump leads in reverse order:  
first remove (-) terminal then (+) terminal..  
► Refit the cover to the (+) terminal, if the  
vehicle has one.  
Before disconnecting the battery:  
Close all openings (doors, boot, windows).  
Connect the other end of the green or black  
cable to the earth point C on the broken down  
vehicle.  
► Allow the engine to run for at least 30  
minutes, with the vehicle stationary, so that  
the battery reaches an adequate state of  
charge.  
► Switch off all electrical consumers (audio  
system, wipers, lighting, etc.).  
► Start the engine on the assisting vehicle and  
leave it running for a few minutes.  
► Switch off the ignition and wait for 4  
For electric version  
minutes.  
► Operate the starter on the broken  
down vehicle and let the engine run;  
144  
In The Event of a Breakdown  
– Not possible to put the gearbox into  
neutral, unlock the steering, or release the  
parking brake.  
If minor problems nevertheless persist  
following this operation, contact a CITROËN  
dealer.  
8
Referring to the relevant section, initialise or  
reset certain equipment:  
– Towing with only two wheels on the  
ground.  
– No approved towbar available.  
-
-
Date and time.  
Preset radio stations.  
Warning  
Before towing the vehicle, it is  
essential to put the vehicle in free-wheeling  
mode.  
Towing the vehicle  
Tip  
-
-
-
Disconnect the negative cable.  
Disconnect the positive cable.  
General recommendations  
Tip  
Remove the top mounting bracket and the  
bottom mounting bracket if you need to  
remove the battery.  
Observe the legislation in force in the  
country where you are driving.  
Check that the towing vehicle is heavier  
than the towed vehicle.  
Electric vehicle  
An electric vehicle cannot under any  
circumstances be used to tow another  
vehicle.  
Warning  
The driver must remain at the wheel of the  
towed vehicle and must have a valid driving  
licence.  
When towing a vehicle with all four wheels  
on the ground, always use an approved  
towbar; ropes and straps are prohibited.  
The towing vehicle must move off gently.  
When the vehicle is towed with its engine  
off, there is no longer braking and steering  
assistance.  
Towing speed should never exceed 40 km/h.  
Be careful not to cause accidental  
short circuits between the positive and  
negative battery terminals.  
Do not allow smoking, sparks or flames  
around fuel or the battery.  
After reconnection  
After reconnecting the battery, turn on the  
ignition and wait 1 minute before starting the  
engine, to enable the electronic systems to  
initialise.  
Warning  
A professional towing service must  
be called if:  
– Broken down on a motorway or main road.  
145  

Related Topics

Tool kit Temporary puncture repair kit Spare wheel Changing a bulb Changing a fuse 12 V battery / Accessory battery Towing the vehicle

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot