In The Event of a Breakdown
Additional sidelights / Connecting tail lights
(if equipped)
Interior lighting
Changing a fuse
8
Courtesy light (10W - 12V - 10W)
Before changing a fuse:
Identify the cause of the fault and fix it.
-
-
Switch off all power consumption.
Identify the defective fuse using the current
allocation tables and diagrams.
To replace a fuse, it is essential to:
Use the special puller to extract the fuse from
its housing and check the condition of its
filament.
Turn the bulb holder a quarter of a turn and pull
it out.
► Always replace the failed fuse with a fuse
of the same rating (same colour); use of
a different rating may cause malfunctions
- risk of fire! If the fault recurs soon after
replacing a fuse, have the electrical system
checked by a CITROËN dealer.
► Pull the bulb out and change it.
Using a thin, flap tip screwdriver, unclip the
entire console surrounding the courtesy light.
Rear foglight (LED)
(Depending on version)
► Remove the defective bulb and replace it.
► Fit the console back into place around the
courtesy light and clip it correctly.
Tip
The fuse allocation tables and the
corresponding diagrams are available from a
CITROËN dealer.
Changing a fuse
Access to the tools
Warning
The replacement of a fuse not shown
in the allocation tables may cause a serious
malfunction of the vehicle. Contact a
CITROËN dealer.
For the replacement of this bulb, contact a
CITROËN dealer.
The puller is located inside the engine fuse box.
Open the bonnet.
Good
Faulty
► Disengage the cover completely.
► Take the puller from its housing.
111
English 