Access
Automatic operation
Reinitialisation of the
electric windows
Rear door windows
Each window can be hinged open to provide
ventilation at the rear seats.
Following reconnection of the battery, the anti-
pinch function must be reinitialised.
The anti-pinch function is not active during
these operations.
To open or close the window, press or pull the
switch fully, beyond the resistance point: the
window opens or closes completely when the
switch is released. Pressing the switch again
stops the movement of the window.
Opening
For each window:
-
bring the window down completely,
then bring it back up. It will go up by a
few centimetres each time. Perform the
operation again until the window is fully
closed,
The electric window switches remain
operational for approximately 45 seconds
after switching off the ignition.
Once this time has elapsed, the electric
windows will not operate. To reactivate
them, switch the ignition on again.
-
continue to pull the switch for at least one
second after reaching the window closed
position.
F Tilt the lever outwards.
F Push it fully to secure the window in the
open position.
In the event of contact (pinching) during
operation of the windows, you must
reverse the movement of the window. To
do this, press the switch concerned.
When the driver operates the passenger
electric window switch, it is important
to ensure that nothing can prevent the
window from closing properly.
Anti-pinch
When the window rises and meets an obstacle,
it stops and immediately partially lowers again.
To reinitialise normal operation, press the
switch until the window opens completely, then
pull the switch immediately until the window
closes fully. Continue to hold the switch for
approximately one more second.
Closing
F Pull the lever to release the window.
F Tilt the lever fully inwards to secure the
window in the closed position.
Be particularly aware of children when
operating the windows.
The anti-pinch safety function is not active
whilst the function is being activated.
42
English 