Get CITRO?N Connect Nav Guide for Citroen C4 Cactus SUV First Generation (2014-2018)

CITROËN Connect Nav

The different functions and settings

described vary according to the version

and configuration of your vehicle.

CITROËN Connect Nav

As a safety measure and because it

requires sustained attention by the

driver, the pairing of a Bluetooth mobile

telephone with the Bluetooth hands-free

system of your audio system must be

done with the vehicle stationary and the

ignition on.

The system is protected in such a way that

it will only operate in your vehicle.

The display of the message Energy

Economy Mode signals that a change to

standby is imminent.

Contents

GPS satellite navigation –

Applications – Multimedia

audio system – Bluetooth^®

telephone

First steps

Steering mounted controls

Menus

Voice commands

Navigation

Connected navigation

Applications

2

3

4

The link below gives access to OSS (Open

Source Software) codes for the system.

https://www.groupe-psa.com/fr/oss/

https://www.groupe-psa.com/en/oss/

5

13

15

18

23

24

25

27

31

33

Radio

DAB radio (Digital Audio Broadcasting)

Media

Telephone

Settings

Frequently asked questions

.

1

CITROËN Connect Nav

First steps

The touch screen is of the "capacitive"

type.

With the engine running, a press

mutes the sound.

With the ignition off, a press turns

the system on.

To clean the screen, use a soft, non-

abrasive cloth (e.g. spectacles cloth) with

no additional cleaning product.

Do not use sharp objects on the screen.

Do not touch the screen with wet hands.

Increase or decrease the volume using

the wheel or the "plus" or "minus" buttons

(depending on the equipment).

Certain information is displayed permanently

in the side bars or in the upper bar of the touch

screen (depending on equipment):

Use the menu buttons on either side of or

below the touch screen for access to the

menus, then press the virtual buttons in the

touch screen.

-

Reminder of the air conditioning information

(depending on version), and direct access to

the corresponding menu.

Go directly to the selection of the audio

source, to the list of radio stations (or list of

titles depending on the source).

Go to the "Notifications" of messages,

emails, map updates and, depending on the

services, the navigation notifications.

Go to the settings for the touch screen and

the digital instrument panel.

Selecting the sound source (depending on

equipment):

Depending on the model, use the "Source"

or "Menu" buttons to access the menus, then

press the virtual buttons in the touch screen.

-

FM/DAB/AM radio stations (depending on

equipment).

-

Telephone connected via Bluetooth and

Bluetooth multimedia broadcast (streaming).

USB memory stick.

Media player connected via the auxiliary

socket (depending on equipment).

CD Player (depending on equipment).

Video (depending on equipment).

You can display the menus at any time by

pressing the screen briefly with three fingers.

-

All of the touch areas of the screen are white.

Press the back arrow to go back a level.

Press "OK" to confirm.

-

2

CITROËN Connect Nav

Telephone (short press): start

Steering mounted controls

telephone call.

Voice commands:

Call in progress (short press):

access telephone menu.

Telephone (long press): reject an

incoming call, end call; when no call

is in progress, access telephone

menu.

This control is located on the

steering wheel or at the end of the

lighting control stalk (depending on

equipment).

Short press, system voice

commands.

Radio (rotate): automatic search for

the previous/next station.

Media (rotate): previous/next track,

move through a list.

Short press: confirm a selection; if

nothing selected, access to presets.

Long press, smartphone voice

commands via the system.

In the "Settings" menu you can create

a profile for just one person or a group

of people with shared interests, with

the possibility of entering multiple

settings (radio presets, audio settings,

navigation history, contact favourites,

etc.); these settings are taken into account

automatically.

Increase volume.

Mute/Restore the sound (depending

on equipment).

Or

Mute by pressing the volume

increase and decrease buttons

simultaneously (depending on

equipment).

Restore the sound by pressing one

of the two volume buttons.

Radio: display the list of stations.

Media: display the list of tracks.

Radio (press and hold): update the

list of stations received.

In very hot conditions, the volume may

be limited to protect the system. It may go

into standby (screen and sound off) for at

least 5 minutes

Decrease volume.

The return to normal takes place when

the temperature in the passenger

compartment has dropped.

Media (short press): change the

multimedia source.

.

3

CITROËN Connect Nav

Telephone

Depending on equipment/Depending on version.

Menus

Connected navigation

Connect a telephone via Bluetooth^®,

read messages and emails and send

quick messages.

Depending on equipment/Depending on version.

Enter navigation settings and

choose a destination.

Use services available in real time,

depending on equipment.

Radio Media

Depending on equipment/Depending on

version.

Select an audio source, a radio

station, display photographs.

Settings

Depending on equipment/Depending on version.

FM 87.5 MHz

Applications

Depending on equipment/Depending on version.

Configure a personal profile and/

or configure the sound (balance,

ambience, etc.) and the display

(language, units, date, time, etc.).

Operate certain applications on

a smartphone connected via

CarPlay^®, MirrorLink^TM(available

depending on the country) or

Android Auto.

Check the state of the Bluetooth^®

and Wi-Fi connections.

4

CITROËN Connect Nav

To ensure that voice commands are

always recognised by the system, please

observe the following recommendations:

Air conditioning

Depending on equipment/Depending on version.

Manage the different temperature

and air flow settings.

-

speak natural language in a normal

tone without breaking up words or

raising your voice.

-

always wait for the "beep" (audible

signal) before speaking.

for optimum operation, it is

recommended that the windows and

sunroof be closed to avoid exterior

interference (depending on version),

before making a voice command, ask

other passengers not to speak.

18,5

21,5

Vehicle

Depending on equipment/Depending on

version.

-

Activate, deactivate or configure

certain vehicle functions.

Voice commands

Steering mounted controls

First steps

Example of a "voice command" for

navigation:

"Navigate to address 11 Regent

Street, London"

Pressing this button activates the

voice commands function.

Example of a "voice command" for

the radio and media:

"Play artist Madonna"

Example of a "voice command" for

the telephone:

"Call David"

.

5

CITROËN Connect Nav

When the voice commands are

activated, by briefly pressing the

button, help is displayed on the

touch screen, offering various

menus and allowing you to interact

with system by voice.

Information – Using the system

The voice commands, with a choice of

17 languages (Arabic, Brazilian, Czech,

Danish, Dutch, English, Farsi, French,

German, Italian, Norwegian, Polish,

Portuguese, Russian, Spanish, Swedish,

Turkish), are made using the language

previously chosen and set in the system.

For some voice commands, there are

alternative synonyms.

Example: Guide to/Navigate to/Go to/...

The voice commands in Arabic for:

"Navigate to address" and "Display POI in

the city" are not available.

Press the Push To Talk voice

command button and tell me

what you'd like after the tone.

Remember you can interrupt

me at any time by pressing

this button. If you press it

again while I'm waiting for

you to speak, it'll end the

conversation. If you need to

interrupt the action in progress,

say "cancel". If you want to

undo something and start over,

say "undo". To get information

and tips at any time, just say

"help". If you ask me to do

something and there's some

information missing that I need,

I'll give you some examples

or take you through it step by

step. There's more information

available in "beginner" mode.

You can set the dialogue mode

to "expert" when you feel

Upon selecting a menu item you have a choice

of commands.

comfortable.

6

CITROËN Connect Nav

Help messages

Global voice commands

Voice commands

These commands can be made from any

screen page after pressing the "Voice

commands" button located on the steering

wheel, as long as there is no telephone

call in progress.

There are lots of topics I can help you with.

You can say: "help with phone", "help with

navigation", "help with media" or "help

with radio". For an overview on how to use

voice controls, you can say "help with voice

controls".

Say "yes" if I got that right. Otherwise, say "no"

and we'll start that again.

Set dialogue mode as novice – expert

Select user 1/Select profile John

Increase temperature

Decrease temperature

.

7

CITROËN Connect Nav

"Navigation" voice

commands

These commands can be made from any screen page after pressing the "Voice commands" button located on the steering wheel, as long as there

is no telephone call in progress.

Voice commands

Help messages

Navigate home

To plan a route, say "navigate to" followed by the address, the contact name or an intersection. For

example, "navigate to address 11 Regent Street, London", "navigate to contact, John Miller", or

"navigate to intersection of Regent Street, London". You can specify if it’s a preferred address, or a

Point of Interest. For example, say "navigate to preferred address, Tennis club", or "navigate to POI

Heathrow Airport in London". Or, you can just say, "navigate home". To see Points of Interest on

a map, you can say things like "show POI hotels in Banbury". For more information say "help with

points of interest" or "help with route guidance".

Navigate to work

Navigate to preferred address, Tennis club

Navigate to contact, John Miller

To choose a destination, say something like "navigate to line three" or "select line two". If you can’t

find the destination but the street’s right, say for example "select the street in line three". To move

around a displayed list, you can say "next page" or "previous page". You can undo your last action

and start over by saying "undo", or say "cancel" to cancel the current action.

Navigate to address 11 regent street,

London

Tell me the remaining distance

Tell me the remaining time

Tell me the arrival time

You can say "stop" or "resume route guidance". To get information about your current route,

you can say "tell me the remaining time", "remaining distance" or "arrival time". To learn more

commands, try saying "help with navigation".

Stop route guidance

8

CITROËN Connect Nav

Show POI ''hotel'' at the destination

Show nearby POI petrol station''

To see points of interest on a map, you can say things like "show hotels in Banbury", "show nearby

parking", "show hotel at the destination" or "show petrol station along the route". If you prefer to

navigate directly to a point of interest, you can say "navigate to nearby petrol station". If you feel

you are not being well understood, try to say the word "POI" in front of the point of interest. For

example say "navigate to POI restaurant at the destination".

To choose a POI, say something like "select line 2". If you’ve searched for a Point of Interest

and don’t see the one you’re after, you can filter further by saying something like "select POI in

line 2", or "select the city in line 3". You can also scroll through the list by saying "next page" or

"previous page".

Navigate to POI Heathrow Airport in

London

Navigate to POI petrol station along the

route

Depending on the country, give the

destination instructions (address) in the

language used by the system.

.

9

CITROËN Connect Nav

"Radio Media" voice

commands

These commands can be made from any screen page after pressing the "Voice commands" button located on the steering wheel, as long as there

is no telephone call in progress.

Voice commands

Help messages

Turn on source radio - Streaming

Bluetooth – …

You can select an audio source by saying "turn on source" followed by the device name. For

example, "turn on source, Streaming Bluetooth", or "turn on source, radio". Use the command

"play" to specify the type of music you’d like to hear. You can choose between "song", "artist", or

"album". Just say something like "play artist, Madonna", "play song, Hey Jude", or "play album,

Thriller".

Tune to channel BBC Radio 2

Tune to 98.5 FM

You can pick a radio station by saying "tune to" and the station name or frequency. For example

"tune to channel Talksport" or "tune to 98.5 FM". To listen to a preset radio station, say for example

"tune to preset number five".

Tune to preset number five

What's playing?

To choose what you’d like to play, start by saying "play" and then the item. For example, say "play

song Hey Jude", "play line 3" or "select line 2". You can undo your last action and start over by

saying "undo", or say "cancel" to cancel the current action.

Play song Hey Jude

Play artist Madonna

Play album Thriller

I’m not sure what you’d like to play. Please say "play" and then a song title, an album title, or an

artist name. For example, say "play song Hey Jude", "play artist Madonna" or "play album Thriller".

To select a line number from the display, say "select line two". To move around a displayed list,

you can say "next page" or "previous page". You can undo your last action and start over by saying

"undo", or say "cancel" to cancel the current action.

Media voice commands are available only for a USB connection.

10

CITROËN Connect Nav

Help messages

"Telephone" voice

commands

Voice commands

These commands can be made from any

screen page after pressing the "Voice

commands" button located on the steering

wheel, as long as there is no telephone

call in progress.

If there is no telephone connected by

Bluetooth, a voice message announces:

"Please first connect a telephone", and the

voice session will be closed.

Call David Miller''

To make a phone call, say "call" followed by

the contact name, for example: "Call David

Miller". You can also include the phone type,

for example: "Call David Miller at home". To

make a call by number, say "dial" followed by

the phone number, for example, "Dial 107776

835 417". You can check your voicemail by

saying "call voicemail". To send a text, say

"send quick message to", followed by the

contact, and then the name of the quick

message you’d like to send. For example,

"send quick message to David Miller, I’ll be

late". To display the list of calls, say "display

calls". For more information on SMS, you can

say "help with texting".

Call voicemail*

Display calls*

To choose a contact, say something like

"select line three". To move around the list

say "next page" or "previous page". You can

undo your last action and start over by saying

"undo", or say "cancel" to cancel the current

action.

*

This function is available only if the telephone connected to the system supports downloading

of contacts and recent calls and if the download has been done.

.

11

CITROËN Connect Nav

"Text message" voice

commands

Voice commands

Help messages

These commands can be made from any

screen page after pressing the "Voice

commands" button located on the steering

wheel, as long as there is no telephone

call in progress.

If there is no telephone connected by

Bluetooth, a voice message announces:

"Please first connect a telephone", and the

voice session will be closed.

Send quick message to Bill Carter, I'll

be late

From the list of quick messages, say the

name of the one you’d like to send. To move

around the list you can say "go to start", "go to

end", "next page" or "previous page". You can

undo your last action and start over by saying

"undo", or say "cancel" to cancel the current

action.

Send SMS to John Miller, I'm just arriving

Please say "call" or "send quick message to",

and then select a line from the list. To move

around a list shown on the display, you can

say "go to start", "go to end", "next page"

or "previous page". You can undo your last

action and start over by saying "undo", or say

"cancel" to cancel the current action.

Send SMS to David Miller at the office,

don't wait for me

The voice commands function "Text

messages" allows you to dictate and send

an SMS.

Dictate your text taking care to make a

short pause between each word.

At the end of the operation, the voice

recognition system will automatically

create an SMS.

Listen to most recent message*

To hear your last message, you can say

"listen to most recent message". When you

want to send a text, there’s a set of quick

messages ready for you to use. Just use the

quick message name and say something like

"send quick message to Bill Carter, I’ll be late".

Check the phone menu for the names of the

supported messages.

*

This function is available only if the

The system only sends pre-recorded

"Quick messages".

telephone connected to the system supports

downloading of contacts and recent calls

and if the download has been done.

12

CITROËN Connect Nav

To "My home" or "My work"

Navigation

Choice of a destination

In order to be able to use the navigation,

it is necessary to fill in the "City", the

"Street" and the "Number" on the

virtual keyboard or take it from the

list in "Contact" or in the "History" of

addresses.

Press Navigation to display the

primary page.

To a new destination

Press Navigation to display the

primary page.

Press the "MENU" button to go to the

secondary page.

Without confirmation of the street number,

you will be guided to one end of the street.

Select "My destinations".

Press the "MENU" button to go to the

secondary page.

Select "Enter address".

Select the "Country".

Select the "Preferred" tab.

Select "My home".

To a recent destination

Press Navigation to display the

primary page.

Or

Enter the "City", the "Street"

and the "Number" and confirm

by pressing on the suggestions

displayed.

Press the "MENU" button to go to the

secondary page.

Select "My work".

Select "My destinations".

Or

Press "OK" to select the "Guidance

criteria".

Select a preset favourite destination.

Select the "Recent" tab.

And/Or

Select the address chosen in the list to display

the "Guidance criteria.

Select "See on map" to select the

"Guidance criteria".

To a contact in the

directory

Press "OK" to start navigation.

Press Navigation to display the

Press "OK" to start navigation.

primary page.

Select "Position" to visualise the arrival

point geographically.

Press the "MENU" button to go to the

secondary page.

Zoom out/zoom in using the touch buttons

or with two fingers on the screen.

.

13

CITROËN Connect Nav

Select "My destinations".

Press "OK" to start calculation of

the route.

Explore the map by sliding a finger on the

screen.

Touch the screen with a finger to go to the next

image.

Select the "Contact" tab.

To a point on the map

Press this button to display the world

map.

Select a contact in the list to start navigation.

Press Navigation to display the

Using the grid, select by zoom the

desired country or region.

primary page.

Explore the map by sliding a finger on the

screen.

To points of interest (POI)

Points of Interest (POI) are listed in different

Press this button to display or enter

the GPS coordinates.

Select the destination by pressing on the map.

categories.

Tap the screen to place a marker

and display the sub-menu.

Press Navigation to display the

primary page.

A marker is displayed in the middle

of the screen, with the "Latitude"

and "Longitude" coordinates.

Press the "MENU" button to go to the

secondary page.

Press this button to start navigation.

Choose the type of coordinates:

DMS for: Degrees, Minutes, Seconds.

DD for: Degrees, Decimals.

Select "Points of interest".

Or

Press this button to save the

address displayed.

Press this button to start navigation.

Select the "Travel", or "Leisure"

or "Commercial" or "Public" or

"Geographic" tab.

Or

A long press on an item opens a list of

POIs nearby.

Press this button to save the

address displayed.

Or

Select "Search" to enter the name

and address of a POI.

OR

To GPS coordinates

Press this button to enter the value

for "Latitude" using the virtual

keypad.

Press Navigation to display the

primary page.

14

CITROËN Connect Nav

And

Network connection provided by

the vehicle

For access to connected navigation, you

can use the connection provided by the

vehicle via the "Emergency or assistance

call" services or use your smartphone as

a modem.

Press this button to enter the value

for "Longitude" using the virtual

keypad.

Activate and enter settings for sharing

the smartphone connection.

OR

TMC (Traffic Message

Channel)

Network connection provided by

the user

TMC (Traffic Message Channel)

messages are linked to a European

standard on the broadcasting of traffic

information via the RDS system on FM

radio, transmitting traffic information in

real time.

The TMC information is then displayed

on a GPS Navigation system map and

taken into account straight away during

navigation, so as to avoid accidents, traffic

jams and closed roads.

Network connection provided by

the vehicle

For the list of eligible smartphones, go

to the brand's internet website in your

country.

The system is automatically

connected to the modem included

for the "Emergency or assistance

calls" services and does not require

a connection provided by the user

via their smartphone.

Connected navigation

connection

Network connection provided by

the user

The display of danger zones depends on

the legislation in force and subscription to

the service.

USB connection

As a safety measure and because it

requires sustained attention by the driver,

using a smartphone when driving is

prohibited.

Connect a USB cable.

The smartphone charges when

connected by a USB cable.

All operations must be done with the

vehicle stationary.

Connected navigation

Bluetooth connection

Depending on version

Activate the Bluetooth function on

the telephone and ensure that it is

visible to all (see the "Applications"

section).

Depending on the equipment level of the

vehicle

.

15

CITROËN Connect Nav

Wi-Fi connection

Using the virtual keypad, enter the

"Key" for the Wi-Fi network and the

"Password".

The principles and standards

are constantly changing; for the

communication process between the

smartphone and the system to work

correctly, we recommend that you

update the operating system of the

smartphone as well as the date and

time of the smartphone and the

system.

Select a Wi-Fi network found by the

system and connect.

Press "OK" to start the connection.

This function is only available if it has been

activated either via the "Notifications" or

via the "Applications" menu.

Restrictions of use:

-

With CarPlay^®, connection sharing is

only with a Wi-Fi connection.

-

With MirrorLink^TM, connection sharing

is only with a USB connection.

Press "Notifications".

Settings specific to

connected navigation

The quality of services depends on the

quality of the network connection.

Select Wi-Fi to activate it.

In the "Settings" menu you can create

a profile for just one person or a group

of people with shared interests, with

the possibility of entering multiple

settings (radio presets, audio settings,

navigation history, contact favourites,

etc.); these settings are taken into account

automatically.

OR

With the arrival of "TOMTOM

TRAFFIC", the services are

available.

Press Applications to display the

primary page.

Press the "OPTIONS" button to go to the

secondary page.

The services offered with connected

navigation are as follows.

A Connected Services pack:

Select "Wi-Fi network

connection".

-

Weather,

Filling stations,

Car park,

Traffic,

POI local search.

Press Navigation to display the

primary page.

Select the "Secured" or "Not

secured" or "Stored" tab.

Press the "MENU" button to go to the

secondary page.

Select a network.

A Danger zone pack (option).

Select "Settings".

16

CITROËN Connect Nav

Select "Map".

Activate or deactivate:

Select the option "Type" to choose

the type of "danger zone".

For access to connected navigation,

you must select the option: "Authorise

sending information" in "Settings".

-

"Allow declaration of danger

zones".

Select the "Speed" option and enter

it using the virtual keypad.

-

"Guidance to final destination

on foot"

Press "OK" to save and distribute

the information.

You can access the "Notifications" at any

time in the top bar.

These settings must be made

according to each profile.

Select "Alerts".

Authorise sending

information

Activate or deactivate "Advise of

car parks nearby".

The display of danger zones depends on

the legislation in force and subscription to

the service.

Press Settings to display the

primary page.

Activate or deactivate "Filling

station alert".

Press the "OPTIONS" button to go to the

secondary page.

Activate or deactivate "Risk areas

alert".

Declaration of "Danger

zones"

Select "System settings".

Next, select this button.

To distribute information on the

declaration of danger zones, you should

check the option: "Allow declaration of

danger zones".

Select the "Privacy mode" tab.

Activate: "Safety zones alert"

Activate or deactivate:

Activate: "Give an audible

warning"

-

"Activating privacy mode".

"Deactivating geolocation

data"

Press Navigation to display the

primary page.

Activate or deactivate "Advise of

POI 1 nearby".

-

"Deactivating privacy mode"

Press the "Declare a new danger

zone" button located in the side bars

or the upper bar of the touch screen

(depending on equipment).

Activate or deactivate "Advise of

POI 2 nearby".

.

17

CITROËN Connect Nav

"Danger zones" pack

updates

Display the weather

Applications

Connectivity

Press Navigation to display the

primary page.

Press Settings to display the

Press Applications to display the

primary page.

Press the "OPTIONS" button to go to the

secondary page.

Press "Connectivity" to go to the CarPlay^®,

MirrorLink^TMor Android Auto functions.

Press this button to display the list of

services.

Select "System settings".

Select "View map".

Select "Weather".

CarPlay^®smartphone

connection

Select the "System info" tab.

Select "View" to display the versions

of the different modules installed in

the system.

As a safety measure and because it

requires sustained attention by the driver,

using a smartphone when driving is

prohibited.

All operations must be done with the

vehicle stationary.

Press this button to display primary

information.

Select "Update(s) due".

Press this button to display the

detailed weather information.

You can download the system and map

updates from the Brand's website.

The update procedure can also be found

on the website.

The temperature displayed at 6 a.m. will

be the maximum temperature for the day.

The temperature displayed at 6 p.m. will

be the minimum temperature for the night.

Once you have downloaded the updates,

the installation on the vehicle must be

done with the engine running and vehicle

stationary.

18

CITROËN Connect Nav

The synchronisation of a personal

smartphone allows users to display

applications adapted for the smartphone's

MirrorLink^TMtechnology on the vehicle

screen.

The principles and standards

are constantly changing, for the

communication process between the

smartphone and the system to operate,

it is essential that the smartphone be

unlocked; update the operating system

of the smartphone as well as the date

and time of the smartphone and the

system.

Press "CarPlay" to display the

The synchronisation of a personal

smartphone allows users to display

applications compatible with the

smartphone's CarPlay^®technology on the

vehicle screen when the smartphone's

CarPlay^®function has been previously

activated.

As the principles and standards are

constantly changing, it is recommended

that you keep your smartphone's

operating system updated.

CarPlay^®interface.

On connecting the USB cable, the

CarPlay^®function deactivates the

system's Bluetooth^®mode.

MirrorLink^TMsmartphone

connection

For the list of eligible smartphones, go

to the brand's internet website in your

country.

Available depending on the country of sale.

For the list of eligible smartphones, go

to the brand's internet website in your

country.

As a safety measure and because it

requires sustained attention by the driver,

using a smartphone when driving is

prohibited.

Connect a USB cable. The

smartphone charges when

connected by a USB cable.

All operations must be done with the

vehicle stationary.

As a safety measure, applications can

only be viewed with the vehicle stationary;

display is interrupted once the vehicle is

moving.

Press on "Telephone" to display the

CarPlay^®interface.

Or

Connect a USB cable. The

smartphone charges when

connected by a USB cable.

The MirrorLink^TMfunction requires the

use of a compatible smartphone and

applications.

From the system, press

"Applications" to display the

primary page.

When connecting a smartphone

to the system, it is recommended

that Bluetooth^®be started on the

smartphone

Press "Connectivity" to go to the CarPlay^®

function.

.

19

CITROËN Connect Nav

Connect a USB cable. The

There may be a wait for the availability of

applications, depending on the quality of

your network.

As a safety measure, applications can

only be viewed with the vehicle stationary;

display is interrupted once the vehicle is

moving.

smartphone charges when

connected by a USB cable.

From the system, press

"Applications" to display the

primary page.

Android Auto smartphone

connection

The "Android Auto" function requires

the use of a compatible smartphone and

applications.

Press "Connectivity" to go to the MirrorLink^TM

function.

As a safety measure and because it

requires sustained attention by the driver,

using a smartphone when driving is

prohibited.

All operations must be done with the

vehicle stationary.

Press "MirrorLink^TM" to start the

application in the system.

Connect a USB cable. The

smartphone charges when

connected by a USB cable.

Depending on the smartphone, it may be

necessary to activate the "MirrorLink^TM

function.

"

From the system, press

"Applications" to display the

primary page.

During the procedure, several

The synchronisation of a personal

smartphone allows users to display

applications adapted for the smartphone's

Android Auto technology on the vehicle

screen.

The principles and standards

are constantly changing, for the

communication process between the

smartphone and the system to operate,

it is essential that the smartphone be

unlocked; update the operating system

of the smartphone as well as the date

and time of the smartphone and the

system.

screen pages relating to certain

functions are displayed.

Accept to start and complete the

connection.

Press "Connectivity" to go to the Android Auto

function.

Press "Android Auto" to start the

application in the system.

Once the connection is established, a page

is displayed with the applications already

downloaded to your smartphone and adapted

to MirrorLink^TMtechnology.

During the procedure, several

screen pages relating to certain

functions are displayed.

Accept to start and complete the

connection.

Access to the different audio sources remains

accessible in the margin of the MirrorLink^TM

display, using touch buttons in the upper bar.

Access to the menus for the system is possible

at any time using the dedicated buttons.

Different audio sources remain accessible in

the margin of the Android Auto display, using

touch buttons in the upper bar.

For the list of eligible smartphones, go

to the brand's internet website in your

country.

20

CITROËN Connect Nav

To complete the pairing, whichever

procedure used (from the telephone or

from the system), ensure that the code

is the same in the system and in the

telephone.

Access to the menus for the system is possible

at any time using the dedicated buttons.

Press "OK" to save and start the

browser.

In Android Auto mode, the function to

display the menus by pressing the screen

briefly with three fingers is deactivated.

Connection to the internet is via one of

the network connections provided by the

vehicle or the user.

Procedure from the system

Bluetooth^®connection

Press Applications to display the

primary page.

There may be a wait for the availability of

applications, depending on the quality of

your network.

As a safety measure and because they

require prolonged attention on the part

of the driver, the operations for pairing

of the Bluetooth mobile telephone with

the Bluetooth hands-free system of your

audio system must be carried out with the

vehicle stationary and the ignition on.

Press the "OPTIONS" button to go to the

secondary page.

Press "Bluetooth connection".

Vehicle apps

Press Applications to display the

primary page.

Select "Search".

The list of telephones detected is

displayed.

Press "Vehicle Apps" to display the

applications home page.

Activate the Bluetooth function on the

telephone and ensure that it is "visible to

all" (telephone configuration).

If the pairing procedure fails, it is

recommended that you deactivate and

then reactivate the Bluetooth function in

your telephone.

Internet Browser

Press Applications to display the

primary page.

Procedure from the telephone

Select the name of the chosen

telephone in the list.

Press "Connectivity" to go to the "Internet

Browser" function.

Select the system name in the list of

devices detected.

Press "Internet Browser" to display the

browser home page.

In the system, accept the connection request

from the telephone.

Depending on the type of telephone, you

may be asked to accept or not the transfer

of your contacts and messages.

Select your country of residence.

.

21

CITROËN Connect Nav

Select "Wi-Fi network

connection".

Select the "Activation" tab to activate or

deactivate sharing of the Wi-Fi connection.

Connection sharing

The system offers to connect the telephone

with 3 profiles:

And/Or

-

"Telephone" (hands-free kit, telephone

only),

"Streaming" (streaming: wireless playing of

the audio files on the telephone),

"Mobile internet data".

Select the "Secured" or "Not

secured" or "Stored" tab.

Select the "Settings" tab to change the name

of the system network and the password.

Select a network.

Press "OK" to confirm.

Using the virtual keypad, enter the

"Key" for the Wi-Fi network and the

"Password".

The "Mobile internet data" profile

must be activated for connected

navigation (where the vehicle does not

have "Emergency and assistance call"

services), having first activated sharing of

this connection on your smartphone.

To protect against unauthorised access

and to make your systems as secure as

possible, the use of a complex security

code or password is recommended.

Press "OK" to start the connection.

The Wi-Fi connection and the sharing of

the Wi-Fi connection are exclusive.

Manage connections

Select one or more profiles.

Press Applications to display the

primary page.

Wi-Fi connection sharing

Press "OK" to confirm.

Press the "OPTIONS" button to go to the

secondary page.

Creation of a local Wi-Fi network by the

system.

Select "Manage connection".

Press Applications to display the

primary page.

Wi-Fi connection

Network connection via the smartphone's

Wi-Fi.

Press the "OPTIONS" button to go to the

secondary page.

With this function you can view the access

to connected services, the availability of

connected services and modify the connection

mode.

Press Applications to display the

primary page.

Select "Share Wi-Fi connection".

Press the "OPTIONS" button to go to the

secondary page.

22

CITROËN Connect Nav

Press "OK" to confirm.

Activate/Deactivate the RDS

Radio

Selecting a station

Press Radio Media to display the

primary page.

Radio reception may be affected by the

use of electrical equipment not approved

by the Brand, such as a USB charger

connected to the 12 V socket.

The exterior environment (hills, buildings,

tunnels, basement car parks, etc.) may

block reception, including in RDS mode.

This is a normal effect of the way in

which radio waves are transmitted and

does not indicate any failure of the audio

equipment.

Press Radio Media to display the

primary page.

Press the "OPTIONS" button to go to the

secondary page.

Press "Frequency".

Select "Radio settings".

Press one of the buttons for an

automatic search for radio stations.

Select "General".

Activate/Deactivate "Station

tracking".

Or

Move the cursor for a manual search

for frequencies up or down.

Press "OK" to confirm.

Presetting a station

RDS, if activated, enables you to

continue listening to the same station

by automatically retuning to alternative

frequencies. However, in certain

conditions, coverage of this RDS station

may not be assured throughout the entire

country as radio stations do not cover

100% of the territory. This explains the

loss of reception of a station during a

journey.

Press Radio Media to display the

primary page.

Select a radio station or frequency.

(refer to the corresponding section)

Press the "OPTIONS" button to go to the

secondary page.

Press "Presets".

Make a long press on one of the

buttons to preset the station.

Select "Radio stations" in the

secondary page.

Press "Frequency".

Changing waveband

Enter the values using the virtual

keypad.

First enter the units then click on the

decimals zone to enter the figures

after the decimal point.

Press Radio Media to display the

primary page.

To change the waveband, press "Band…"

displayed at the top right of the screen.

.

23

CITROËN Connect Nav

Press Radio Media to display the

primary page.

Display text information

Play TA messages

The TA (Traffic Announcement) function

gives priority to TA alert messages.

To operate, this function needs good

reception of a radio station that carries

this type of message. While traffic

information is being broadcast, the

current media is automatically interrupted

so that the TA message can be heard.

Normal play of the media previously

playing is resumed at the end of the

message.

Press "Band…" at the top right of the screen to

display the DAB waveband.

The "Radio Text" function allows

information transmitted by the radio

station and related to the station or the

song playing to be displayed.

DAB-FM tracking

DAB does not cover 100% of the territory.

When the digital radio signal is poor,

"DAB-FM tracking" allows you to

continue listening to the same station,

by automatically switching to the

corresponding FM analogue station (if

there is one).

Press Radio Media to display the

primary page.

Press the "OPTIONS" button to go to the

secondary page.

Select "Announcements".

Select "Radio settings".

Activate/Deactivate "Traffic

announcement".

Select "General".

Press Radio Media to display the

primary page.

Press "OK" to confirm.

Activate/Deactivate "Display radio

text".

Press the "OPTIONS" button to go to the

secondary page.

Press "OK" to confirm.

DAB (Digital Audio

Broadcasting) radio

Select "Radio settings".

Terrestrial Digital Radio

Select "General".

Activate/Deactivate "FM-DAB

Tracking".

Digital radio provides higher quality

reception.

The various "multiplexes/ensembles" offer

a choice of radio stations arranged in

alphabetical order.

Activate/Deactivate "Station

tracking".

24

CITROËN Connect Nav

Press "OK".

Insert the USB memory stick in the USB port or

connect the USB device to the USB port using

a suitable cable (not supplied).

Connect the portable device (MP3 player, etc.)

to the jack socket using an audio cable (not

supplied).

First adjust the volume of your portable device

(to a high level). Then adjust the volume of your

audio system.

If "DAB-FM tracking" is activated, there

is a difference of a few seconds when the

system switches to FM analogue radio

with sometimes a variation in volume.

Once the digital signal quality is restored,

the system automatically changes back

to DAB.

To protect the system, do not use a USB

hub.

Operation of controls is via the portable device.

The system builds playlists (in temporary

memory), an operation which can take from

a few seconds to several minutes at the first

connection.

CD player

Depending on equipment

Insert the CD in the player.

Reduce the number of non-music files and the

number of folders to reduce the waiting time.

The playlists are updated every time the

ignition is switched off or a USB memory stick

is connected. The lists are memorised: if they

are not modified, the subsequent loading time

will be shorter.

If the DAB station being listened to is

not available on FM ("DAB-FM" option

greyed out), or "DAB-FM tracking" is not

activated, the sound will cut out while the

digital signal is too weak.

Selecting the source

Press Radio Media to display the

primary page.

Select "Source".

Auxiliary socket (AUX)

Choose the source.

Media

USB port

Depending on equipment

Watching a video

For safety reasons and because it

requires the sustained attention of the

driver, viewing a video is only possible

when the vehicle is stationary and

the ignition is switched on; as soon as

movement resumes, the video stops.

This source is only available if "Auxiliary input"

has been checked in the audio settings.

.

25

CITROËN Connect Nav

Insert a USB memory stick in the USB port.

Information and advice

Once connected in streaming mode, the

telephone is considered to be a media

source.

Video control commands are accessible

only through the touch screen.

The system supports USB mass storage

devices, BlackBerry^®devices or Apple^®

players via USB ports. The adapter cable

is not supplied.

Device management is done by the audio

system controls.

Other peripherals, not recognised on

connection, must be connected to the

auxiliary socket using a Jack cable (not

supplied) or via Bluetooth streaming,

depending on compatibility.

Connecting Apple^®players

Connect the Apple^®player to the USB port

using a suitable cable (not supplied).

Play starts automatically.

Press Radio Media to display the

primary page.

Select "Source".

Select Video to start the video.

Control is via the audio system.

To remove the USB memory stick,

press the pause button to stop the

video, then remove the memory

stick.

The classifications available are those of

the portable device connected (artists/

albums/genres/playlists/audiobooks/

podcasts).

The default classification used is by

artists. To modify the classification used,

return to the first level of the menu then

select the desired classification (playlists

for example) and confirm to go down

through the menu to the desired track.

To protect the system, do not use a USB

hub.

Bluetooth^®audio streaming

Streaming allows you to listen to music from

The audio equipment will only play audio files

with ".wma", ".aac", ".flac", ".ogg" and ".mp3" file

extensions and with a bitrate of between

32 Kbps and 320 Kbps.

It also supports VBR (Variable Bitrate) mode.

No other file types (.mp4, etc.) can be played.

Files of the ".wma" type should be to the wma

9 standard.

your smartphone.

The Bluetooth profile must be activated, first

adjust the volume on your portable device (to a

high level).

Then adjust the volume of your audio system.

The version of software in the audio system

may not be compatible with the generation of

your Apple^®player.

If play does not start automatically, it may be

necessary to start the audio playback from the

telephone.

The sampling rates supported are 32, 44 and

48 kHz.

Control is from the portable device or by using

the system's touch buttons.

26

CITROËN Connect Nav

To avoid any playback or display issues, it is

advisable to create file names that have less

than 20 characters and without using any

special characters (e.g. " ? . ; ù).

Procedure from the system

Telephone

Pairing a Bluetooth^®

telephone

Press Telephone to display the

primary page.

Use only USB memory sticks in FAT32 format

(File Allocation Table).

Press "Bluetooth search".

As a safety measure and because it

requires sustained attention by the

driver, the pairing of a Bluetooth mobile

telephone with the Bluetooth hands-free

system of your audio system must be

done with the vehicle stationary and the

ignition on.

It is recommended that the original USB

cable for the portable device be used.

Or

Select "Search".

The list of telephones detected is

displayed.

CD player (depending on equipment).

In order to be able to play a burned CDR or

CDRW, select ISO 9660 level 1, 2 or Joliet

standards if possible when burning the CD.

If the disc is burned in another format, it may

not be played correctly.

It is recommended that the same burning

standard be always used on an individual disc,

with the lowest speed possible (4x maximum)

for the best acoustic quality.

If the pairing procedure fails, it is

recommended that you deactivate and

then reactivate the Bluetooth function in

your telephone.

Activate the Bluetooth function on the

telephone and ensure that it is "visible to

all" (telephone configuration).

Select the name of the chosen

telephone in the list.

Procedure from the telephone

In the particular case of a multi-session CD, the

Joliet standard is recommended.

Select the system name in the list of

devices detected.

Connection sharing

The system offers to connect the telephone

with 3 profiles:

In the system, accept the connection request

from the telephone.

-

"Telephone" (hands-free kit, telephone

only),

"Streaming" (streaming: wireless playing of

the audio files on the telephone),

"Mobile internet data".

To complete the pairing, whichever

procedure used (from the telephone or

from the system), ensure that the code

is the same in the system and in the

telephone.

.

27

CITROËN Connect Nav

Press the "OPTIONS" button to go to the

secondary page.

Go to the Brand's website for more information

(compatibility, additional help, etc.).

Activation of the profile; "Mobile internet

data" is obligatory for connected

Select "Bluetooth connection" to

display the list of paired devices.

navigation having first activated sharing of

this connection on your smartphone.

Managing paired telephones

Press the "details" button.

This function allows the connection or

disconnection of a peripheral device as

well as the deletion of a pairing.

Select one or more profiles.

Press "OK" to confirm.

Select one or more profiles.

Press Telephone to display the

primary page.

Press "OK" to confirm.

Depending on the type of telephone, you

may be asked to accept or not the transfer

of your contacts and messages.

Press the "OPTIONS" button to go to the

secondary page.

The ability of the system to connect to just

one profile depends on the telephone.

All three profiles may connect by default.

Select "Bluetooth connection" to

display the list of paired devices.

Automatic reconnection

On return to the vehicle, if the last

Press on the name of the telephone

chosen in the list to disconnect it.

Press again to connect it.

telephone connected is present again,

it is automatically recognised and within

around 30 seconds after switching on the

ignition the pairing is done without any

action on your part, (Bluetooth activated).

The available services depend on the

network, SIM card, and the devices'

Bluetooth compatibility. Consult your

telephone's manual and your operator to

find out which services are available to

you.

Deleting a telephone

Select the basket at top right of the

screen to display a basket alongside

the telephone chosen.

To modify the connection profile:

The profiles compatible with the system

are: HFP, OPP, PBAP, A2DP, AVRCP,

MAP and PAN.

Press Telephone to display the

primary page.

28

CITROËN Connect Nav

Press the basket alongside the

telephone chosen to delete it.

Calling a new number

Calling a recently used

number

Press Telephone to display the

primary page.

Receiving a call

Enter the phone number using the

digital keypad.

Or

An incoming call is announced by a ring and a

superimposed display in the screen.

Make a long press

Make a short press on the steering

mounted telephone button to accept

an incoming call.

Press "Call" to start the call.

on the steering mounted button.

And

Select "Calls".

Calling a contact

Make a long press

Select the desired contact from the list offered.

Press Telephone to display the

primary page.

It is always possible to make a call directly

from the telephone; as a safety measure,

first park the vehicle.

on the steering mounted telephone

button to reject the call.

Or make a long press

Or

on the steering mounted button.

Select "End call" on the touch

screen.

Managing contacts/entries

Select "Contact".

Select the desired contact from the list offered.

Making a call

Press Telephone to display the

primary page.

Select "Call".

Using the telephone is not recommended

while driving.

Select "Contact".

Park the vehicle.

Make the call using the steering mounted

controls.

Select "Create" to add a new

contact.

.

29

CITROËN Connect Nav

In the "Telephone" tab, enter the telephone

numbers for the contact.

Press "Call" to start the call.

Select the "Delayed" or "My arrival"

or "Not available" or "Other" tab

with the possibility of creating new

messages.

In the "Address" tab, enter the addresses for

the contact.

Press "Play" to hear the message.

Press "Create" to write a new

message.

In the "Email" tab, enter the email addresses

for the contact.

Access to "Messages" depends on the

compatibility of the smartphone and the

integral system.

Depending on the smartphone, access to

your messages or email may be slow.

Select the message chosen in one

of the lists.

The "Email" function allows email

addresses to be entered for a contact, but

the system is not able to send emails.

Press "Transfer" to select the

addressee(s).

The services available depend on

the network, the SIM card and the

compatibility of the Bluetooth devices

used.

Check in the manual for your smartphone

and with your service provider for the

services available to you.

Managing messages

Press "Play" to start playing the

message.

Press Telephone to display the

primary page.

Press the "OPTIONS" button to go to the

secondary page.

Managing email

Press Telephone to display the

primary page.

Select "Messages" to display the list

of messages.

Press the "OPTIONS" button to go to the

secondary page.

Managing quick messages

Select the "All" or "Incoming" or

"Sent" tab.

Press Telephone to display the

Select "Email" to display the list of

primary page.

messages.

Select the detail of the message

chosen in one of the lists.

Press the "OPTIONS" button to go to the

Select the "Incoming" or "Sent" or

"Not read" tab.

secondary page.

Press "Answer" to send a quick

message stored in the system.

Select "Quick messages" to display

the list of messages.

Select the message chosen in one of the lists.

30

CITROËN Connect Nav

Press Settings to display the

Press "Play" to start playing the

message.

The sound balance (or spatialisation with

that allows the quality of the sound to

be adapted according to the number of

passengers in the vehicle.

primary page.

Press the "OPTIONS" button to go to the

secondary page.

Access to "Email" depends on the

compatibility of the smartphone and the

integral system.

Select "Setting of the profiles".

Available only with the front and rear

speakers configuration.

Select "Profile 1" or "Profile 2" or "Profile 3"

or "Common profile".

Settings

Audio settings

The audio settings Ambience (6 optional

ambiences) and Bass, Medium and

Treble are different and independent for

each audio source.

Press this button to enter a name for

the profile using the virtual keypad.

Press Settings to display the

Activate or Deactivate "Loudness".

The settings for "Balance" (All

passengers, Driver and Front only) are

common to all sources.

primary page.

Press "OK" to confirm.

Select "Audio settings".

Press this button to add a

photograph to the profile.

Activate or Deactivate "Touch tones",

"Volume linked to speed" and

"Auxiliary input".

Select "Ambience".

Or

Insert a USB memory stick

containing the photograph in the

USB port.

"Balance"

Or

Onboard audio: the Sound Staging of

sound in the passenger compartment.

Select the photograph.

"Sound".

Or

Press "OK" to accept the transfer of

the photograph.

"Voice".

Or

Profile settings

Press "OK" again to save the

settings.

As a safety measure and because it

requires the sustained attention of the

driver, changes to settings must only be

done with the vehicle stationary.

"Ringtone".

Press "OK" to save the settings.

.

31

CITROËN Connect Nav

Modifying system settings

The framing for the photograph is

square; the system reshapes the original

photograph if in another format.

Resetting the system to "Factory Settings"

activates English by default, as well as

Fahrenheit degrees, and turns off daylight

saving (summer) time.

Press Settings to display the

primary page.

Press this button to initialise the

profile selected.

Press the "OPTIONS" button to go to the

secondary page.

Select "System info" to display the versions of

the different modules installed in the system.

Select "Screen configuration".

Initialisation of the profile selected

activates the English language by default.

Select the language

Select "Animation".

Select a "Profile" (1 or 2 or 3) to associate the

"Audio settings" with it.

Press Settings to display the

primary page.

Activate or deactivate: "Automatic

scrolling".

Select "Audio settings".

Select "Brightness".

Press the "OPTIONS" button to go to the

secondary page.

Move the cursor to adjust the

brightness of the screen and/or of

the instrument panel.

Select "Ambience".

Select "Languages" to change the

language.

Or

"Balance"

Or

Press Settings to display the

primary page.

Setting the date

"Sound".

Or

Press the "OPTIONS" button to go to the

secondary page.

Press Settings to display the

Select "System settings".

primary page.

"Voice".

Or

Press the "OPTIONS" button to go to the

secondary page.

Select "Units" to change the units of distance,

"Ringtone".

fuel consumption and temperature.

Select "Set time-date".

Press "OK" to save the settings.

Select "Factory settings" to return to the initial

settings.

32

CITROËN Connect Nav

Select "Colour schemes".

Select "Date".

Press this button to define the date.

Press this button to define the time

zone.

Select the display format for the time

(12h/24h).

Select a colour scheme in the list

then press "OK" to confirm.

Press "OK" to confirm.

Activate or deactivate summer time

(+1 hour).

Select the display format of the date.

Activate or deactivate

synchronisation with GPS (UTC).

Every time the colour scheme is changed,

the system restarts, temporarily displaying

a black screen.

Adjustment of the time and date is only

available if "GPS synchronisation" is

deactivated.

Press "OK" to confirm.

Frequently asked

questions

The following information groups together the

answers to the most frequently asked questions

concerning your system.

The system does not automatically manage

the change between winter and summer

time (depending on the country of sale).

Setting the time

Press Settings to display the

primary page.

Colour schemes

Depending on equipment/Depending on

Press the "OPTIONS" button to go to the

secondary page.

version.

Select "Set time-date".

As a safety measure, the procedure

for changing the colour scheme is only

possible when the vehicle is stationary.

Select "Time".

Press this button to adjust the time

using the virtual keypad.

Press Settings to display the

primary page.

Press "OK" to confirm.

.

33

CITROËN Connect Nav

Navigation

QUESTION

RESPONSE

SOLUTION

The route calculation is not successful.

The guidance criteria may be in conflict with

the current location (exclusion of toll roads on

a toll road).

Check the route settings in the "Navigation"

menu.

The POIs do not appear.

The POIs have not been selected.

Select the POIs in the list of POIs.

The audible warning of "Danger zones" does

not work.

The audible warning is not active or the volume

is too low.

Activate the audible warning in the "Navigation"

menu and check the voice volume in the audio

settings.

The system does not suggest a detour around

an incident on the route.

The guidance criteria do not take account of

TMC messages.

Select setting for the "Traffic info " function in

the list of route settings (Without, Manual or

Automatic).

I receive a "Danger zone" alert which is not on

my route.

Other than guidance, the system announces all Zoom in on the map to see the exact position

"Danger zones" positioned in a cone located in

front of the vehicle. It may provide an alert for

"Danger zones" located on nearby or parallel

roads.

of the "Danger zone". Select "On the route" to

no longer receive alerts other than navigation

instructions or to reduce the time for the

announcement.

Certain traffic jams along the route are not

indicated in real time.

On starting, it is several minutes before the

system begins to receive the traffic information. received correctly (display of the traffic

information icons on the map).

Wait until the traffic information is being

In certain countries, only major routes

(motorways, etc.) are listed for the traffic

information.

This is perfectly normal. The system is

dependent on the traffic information available.

34

CITROËN Connect Nav

The altitude is not displayed.

On starting, the initialisation of the GPS may

take up to 3 minutes to receive more than

4 satellites correctly.

Wait until the system has started up completely

so that there is GPS coverage by at least

4 satellites.

Depending on the geographical environment

(tunnel, etc.) or the weather, the conditions of

reception of the GPS signal may vary.

This behaviour is normal. The system is

dependent on the GPS signal reception

conditions.

My navigation is no longer connected.

During start-up and in certain geographical

areas, the connection may be unavailable.

Check that the connected services are

activated (settings, contract).

Radio

QUESTION

RESPONSE

SOLUTION

The reception quality of the tuned radio station

gradually deteriorates or the stored stations are the station or no transmitter is present in the

not working (no sound, 87.5 MHz is displayed,

etc.).

The vehicle is too far from the transmitter of

Activate the "RDS" function by means of the

short-cut menu to enable the system to check

whether there is a more powerful transmitter in

the geographical area.

geographical area.

The environment (hills, buildings, tunnels,

basement car parks, etc.) block reception,

including in RDS mode.

This phenomenon is normal and does not

indicate a failure of the audio equipment.

The aerial is absent or has been damaged (for

example when going through a car wash or into

an underground car park).

Have the aerial checked by a dealer.

.

35

CITROËN Connect Nav

I cannot find some radio stations in the list of

stations received.

The station is not received or has changed its

name in the list.

Press on the "Update list" button in the "Radio

stations" secondary menu.

The name of the radio station changes.

Some radio stations send other information

in place of their name (the title of the song for

example).

The system interprets these details as the

station name.

Media

QUESTION

RESPONSE

SOLUTION

Playback of my USB memory stick starts only

after a very long wait (around 2 to 3 minutes).

Some files supplied with the memory stick

may greatly slow down access to reading

the memory stick (multiplication by 10 of the

catalogue time).

Delete the files supplied with the memory stick

and limit the number of sub-folders in the file

structure on the memory stick.

The CD is ejected every time or is not played.

The CD is upside down, cannot be read, does

not contain audio files or contains audio files of

a format not recognised by the audio system.

The CD has been recorded in a format that is

not compatible with the player (udf, etc.).

The CD is protected by an anti-pirating system

not recognised by the audio system.

Check that the CD is inserted in the player the

right way up.

Check the condition of the CD: the CD cannot

be played if it is too badly damaged.

Check the content in the case of a recorded

CD: follow the advice in the "AUDIO" section.

The audio system CD does not read DVDs.

Due to poor quality, certain burned CDs will not

be read by the audio system.

36

CITROËN Connect Nav

This is perfectly normal.

There is a long waiting period following the

insertion of a CD or connection of a USB

memory stick.

Upon insertion of a new key, the system reads

a certain amount of data (directory, title, artist,

etc.). This may take from a few seconds to a

few minutes.

The CD sound is of poor quality.

The CD used in scratched or of poor quality.

Insert good quality CDs and store them in

suitable conditions.

The audio settings (bass, treble, ambience) are Return bass and treble settings to 0, without

unsuitable.

selecting an ambience.

Some information characters in the currently

playing media are not displayed correctly.

The audio system does not display some types

of characters.

Use standard characters to name tracks and

folders.

Playback of streaming files does not start.

The connected device does not automatically

launch playback.

Start playback from the device.

Names of tracks and playing time are not

displayed on the audio streaming screen.

The Bluetooth profile does not allow the

transfer of this information.

.

37

CITROËN Connect Nav

Telephone

QUESTION

RESPONSE

SOLUTION

I cannot connect my Bluetooth telephone.

The telephone's Bluetooth function may be

switched off or the telephone may not be

visible.

Check that your telephone has Bluetooth

switched on.

Check in the telephone settings that it is

"visible to all".

The Bluetooth telephone is not compatible with

the system.

You can check the compatibility of your

telephone at the Brand's website (services).

The volume of the telephone connected in

Bluetooth mode is inaudible.

The sound depends on both the system and

the telephone.

Increase the volume of the audio system, to

maximum if required, and increase the volume

of the telephone if necessary.

Ambient noise affects the quality of the

telephone call.

Reduce the ambient noise level (close the

windows, reduce the booster fan speed, slow

down, etc.).

Some contacts are duplicated in the list.

The options for synchronising contacts are

synchronising the contacts on the SIM card,

the contacts on the telephone, or both. When

both synchronisations are selected, some

contacts may be duplicated.

Select "Display SIM card contacts" or "Display

telephone contacts".

The contacts are not listed in alphabetical

order.

Some telephones offer display options.

Depending on the settings chosen, contacts

can be transferred in a specific order.

Modify the telephone directory display settings.

The system does not receive SMS.

The Bluetooth mode does not permit sending

SMS text messages to the system.

38

CITROËN Connect Nav

Settings

QUESTION

RESPONSE

SOLUTION

When changing the setting of treble and bass,

the equalizer setting is deselected.

The selection of an equalizer setting imposes

the settings for treble and bass and vice versa.

Modify the treble and bass or equalizer settings

to obtain the desired musical ambience.

When changing the equalizer setting, the treble

and bass settings are reset.

When changing the balance setting,

distribution is deselected.

The selection of a distribution setting imposes

the balance settings and vice versa.

Modify the balance setting or the distribution

setting to obtain the desired sound quality.

When changing the distribution setting, the

balance setting is deselected.

There is a difference in sound quality between

the different audio sources.

To allow for optimal listening quality, the

audio settings can be tailored to different

sound sources, which can generate audible

differences when changing source.

Check that the audio settings are adapted to

the sources listened to. It is recommended that

the audio settings (Bass:, Treble:, Balance)

be adjusted to the middle position, select the

"None" musical ambience and set the loudness

correction to the "Active" position in CD mode

or to the "Inactive" position in radio mode.

When the engine is off, the system switches off

after several minutes of use.

When the engine is switched off, the system's

operating time depends on the state of charge of

the battery.

Start then vehicle's engine to increase the

charge of the battery.

The switch-off is normal: the system automatically

goes into energy economy mode and switches off

to maintain an adequate charge in the battery.

The date and time cannot be set.

Setting of the date and time is only available

if the synchronisation with the satellites is

deactivated.

Settings menu/Options/Time-Date setting.

Select the "Time" tab and deactivate the "GPS

synchronisation" (UTC).

.

39

CITROËN Connect Nav

40

CITRO?N Connect Nav for Your Citroen C4 Cactus SUV First Generation (2014-2018)

Related Topics

Popular Owner Manuals

Latest Owner Manuals