Advertisement

Advertisement

CITRO?N Connect Nav -> Media for Your Citroen C4 Cactus SUV First Generation (2014-2018)

CITROËN Connect Nav  
Press "OK".  
Insert the USB memory stick in the USB port or  
connect the USB device to the USB port using  
a suitable cable (not supplied).  
Connect the portable device (MP3 player, etc.)  
to the jack socket using an audio cable (not  
supplied).  
First adjust the volume of your portable device  
(to a high level). Then adjust the volume of your  
audio system.  
If "DAB-FM tracking" is activated, there  
is a difference of a few seconds when the  
system switches to FM analogue radio  
with sometimes a variation in volume.  
Once the digital signal quality is restored,  
the system automatically changes back  
to DAB.  
To protect the system, do not use a USB  
hub.  
Operation of controls is via the portable device.  
The system builds playlists (in temporary  
memory), an operation which can take from  
a few seconds to several minutes at the first  
connection.  
CD player  
Depending on equipment  
Insert the CD in the player.  
Reduce the number of non-music files and the  
number of folders to reduce the waiting time.  
The playlists are updated every time the  
ignition is switched off or a USB memory stick  
is connected. The lists are memorised: if they  
are not modified, the subsequent loading time  
will be shorter.  
If the DAB station being listened to is  
not available on FM ("DAB-FM" option  
greyed out), or "DAB-FM tracking" is not  
activated, the sound will cut out while the  
digital signal is too weak.  
Selecting the source  
Press Radio Media to display the  
primary page.  
Select "Source".  
Auxiliary socket (AUX)  
Choose the source.  
Media  
USB port  
Depending on equipment  
Watching a video  
For safety reasons and because it  
requires the sustained attention of the  
driver, viewing a video is only possible  
when the vehicle is stationary and  
the ignition is switched on; as soon as  
movement resumes, the video stops.  
This source is only available if "Auxiliary input"  
has been checked in the audio settings.  
.
25  
CITROËN Connect Nav  
Insert a USB memory stick in the USB port.  
Information and advice  
Once connected in streaming mode, the  
telephone is considered to be a media  
source.  
Video control commands are accessible  
only through the touch screen.  
The system supports USB mass storage  
devices, BlackBerry® devices or Apple®  
players via USB ports. The adapter cable  
is not supplied.  
Device management is done by the audio  
system controls.  
Other peripherals, not recognised on  
connection, must be connected to the  
auxiliary socket using a Jack cable (not  
supplied) or via Bluetooth streaming,  
depending on compatibility.  
Connecting Apple® players  
Connect the Apple® player to the USB port  
using a suitable cable (not supplied).  
Play starts automatically.  
Press Radio Media to display the  
primary page.  
Select "Source".  
Select Video to start the video.  
Control is via the audio system.  
To remove the USB memory stick,  
press the pause button to stop the  
video, then remove the memory  
stick.  
The classifications available are those of  
the portable device connected (artists/  
albums/genres/playlists/audiobooks/  
podcasts).  
The default classification used is by  
artists. To modify the classification used,  
return to the first level of the menu then  
select the desired classification (playlists  
for example) and confirm to go down  
through the menu to the desired track.  
To protect the system, do not use a USB  
hub.  
Bluetooth® audio streaming  
Streaming allows you to listen to music from  
The audio equipment will only play audio files  
with ".wma", ".aac", ".flac", ".ogg" and ".mp3" file  
extensions and with a bitrate of between  
32 Kbps and 320 Kbps.  
It also supports VBR (Variable Bitrate) mode.  
No other file types (.mp4, etc.) can be played.  
Files of the ".wma" type should be to the wma  
9 standard.  
your smartphone.  
The Bluetooth profile must be activated, first  
adjust the volume on your portable device (to a  
high level).  
Then adjust the volume of your audio system.  
The version of software in the audio system  
may not be compatible with the generation of  
your Apple® player.  
If play does not start automatically, it may be  
necessary to start the audio playback from the  
telephone.  
The sampling rates supported are 32, 44 and  
48 kHz.  
Control is from the portable device or by using  
the system's touch buttons.  
26  
CITROËN Connect Nav  
To avoid any playback or display issues, it is  
advisable to create file names that have less  
than 20 characters and without using any  
special characters (e.g. " ? . ; ù).  
Procedure from the system  
Telephone  
Pairing a Bluetooth®  
telephone  
Press Telephone to display the  
primary page.  
Use only USB memory sticks in FAT32 format  
(File Allocation Table).  
Press "Bluetooth search".  
As a safety measure and because it  
requires sustained attention by the  
driver, the pairing of a Bluetooth mobile  
telephone with the Bluetooth hands-free  
system of your audio system must be  
done with the vehicle stationary and the  
ignition on.  
It is recommended that the original USB  
cable for the portable device be used.  
Or  
Select "Search".  
The list of telephones detected is  
displayed.  
CD player (depending on equipment).  
In order to be able to play a burned CDR or  
CDRW, select ISO 9660 level 1, 2 or Joliet  
standards if possible when burning the CD.  
If the disc is burned in another format, it may  
not be played correctly.  
It is recommended that the same burning  
standard be always used on an individual disc,  
with the lowest speed possible (4x maximum)  
for the best acoustic quality.  
If the pairing procedure fails, it is  
recommended that you deactivate and  
then reactivate the Bluetooth function in  
your telephone.  
Activate the Bluetooth function on the  
telephone and ensure that it is "visible to  
all" (telephone configuration).  
Select the name of the chosen  
telephone in the list.  
Procedure from the telephone  
In the particular case of a multi-session CD, the  
Joliet standard is recommended.  
Select the system name in the list of  
devices detected.  
Connection sharing  
The system offers to connect the telephone  
with 3 profiles:  
In the system, accept the connection request  
from the telephone.  
-
-
-
"Telephone" (hands-free kit, telephone  
only),  
"Streaming" (streaming: wireless playing of  
the audio files on the telephone),  
"Mobile internet data".  
To complete the pairing, whichever  
procedure used (from the telephone or  
from the system), ensure that the code  
is the same in the system and in the  
telephone.  
.
27