Safety
F attach the hook of the upper strap to ring B,
F tighten the upper strap.
ISOFIX mountings
The seats, illustrated below, are fitted with
regulation ISOFIX mountings:
When fitting an ISOFIX child seat to the
left-hand rear position of the bench seat,
before fitting the seat, first move the
centre rear seat belt towards the middle
of the vehicle, so as to avoid interference
with the operation of the seat belt.
-
a ring B, behind the seat and identified by a
marking, referred to as the TOP TETHER ,
for fixing the upper strap.
There are three rings for each seat:
The incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
Strictly follow the fitting instructions
provided in the user guide supplied with
the child seat.
This arrangement reduces forward tipping of
the child seat in the event of a front impact.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with two
latches which are secured to the two rings A.
Some seats also have a upper strap, which is
attached to ring B.
For information on the possibilities for
installing ISOFIX child seats in your
vehicle, refer to the summary table.
To secure the child seat at the TOP TETHER:
F remove and stow the head restraint before
installing the child seat on the seat (refit it
once the child seat has been removed),
F pass the upper strap of the child seat behind
the seat backrest, centring it between the
apertures of the head restraint rods,
-
two rings A, located between the vehicle
seat backrest and cushion, indicated by a
marking,
88
English 