D R I V I N G
SITUATION
CONSEQUENCES
Display of message "Parking brake faulty"
and the following warning lamps:
-
-
The automatic functions are deactivated.
The hill start assist is unavailable.
To apply the electric parking brake:
Immobilise the vehicle and switch off the ignition.
Pull the control lever for at least 5 seconds or until maximum
application.
Switch on the ignition and check that the electric parking brake
warning lamps are on.
4
-
-
Application may take longer than in normal operation.
If warning lamp P flashes or if the warning lamps do not come
on when the ignition is switched on, this method does not work.
Have it checked by a CITROËN dealer.
and/or
flashing
To release the electric parking brake:
Switch on the ignition.
Pull the control lever and hold it for approximately 3 seconds.
Display of message "Parking brake control
faulty – auto parking brake activated" and
the following warning lamps:
-
-
Only the functions for automatic application on switching off the
engine and automatic release on acceleration are available.
Manual application/release of the electric parking brake and
dynamic emergency braking are unavailable.
IX
5
6
and/or
Battery fault
flashing
-
-
Lighting of the battery warning lamp makes it essential to stop
the vehicle as soon as traffic allows. Stop and immobilise your
vehicle.
Apply the electric parking brake before switching off the engine.
Copyright CITROEN compiled by C4owners.org
132
English 