D R I V I N G
-
-
For safety reasons, depending
on the engine speed, a change
up or down may be performed
automatically.
It is possible at any time to move
from position D (driving in auto-
matic mode) to position M (driving
in sequential mode) or vice versa.
Manual operation
The flashing of the warn-
ing lamp for the position
requested signals that this
position is not yet obtained.
Position of the selector for manual
gear changing.
Pull the " + " paddle to change up
a gear.
Pull the " - " paddle to change
down a gear.
Move the selector to po-
sition M.
If the warning lamp is on fixed, the
position is confirmed.
Display of a dash in the rev counter
indicates a malfunction. Consult a
CITROËN dealer.
Lighting of the service warning
lamp accompanied by a message
and an audible signal indicates an
operating fault. In this case:
-
If the vehicle stops or reduces
speed (for example when ap-
proaching a stop sign), the gear-
box changes down automatically
to first gear.
-
-
In sequential mode, it is not nec-
essary to release the accelerator
during gear changes.
A request to change gear is ac-
cepted only if the engine speed
permits it.
-
a marked snatching may be felt
when selecting R for reverse
gear,
-
-
the gearbox is locked in one
gear,
do not exceed a speed of
60 mph (approx. 100 km/h).
Consult a CITROËN dealer.
Copyright CITRO
E
N compiled by C4owners.org 142
English 