P R A C T I C A L I N F O R M AT I O N
PUNCTURE REPAIR KIT
Using the kit
Tick the wheel to be repaired
on the speed limitation sticker
enclosed then affix the sticker
to the vehicle's steering wheel
to remind you that a wheel is in
temporary use.
Switch off the ignition.
Clip the bottle 1 on the compres-
sor 2.
Complete system consisting of a
compressor and a bottle of sealant
which permits temporary repair of
the tyre so that you can drive to the
nearest garage.
Check that the switch A is tilted
to position "0".
Connect the pipe of the bottle 1
to the valve of the tyre to be re-
paired.
Unwind the pipe of the compres-
sor 2 fully before connecting it to
the bottle.
The kit is located in the boot under
the floor or under the flap in the sec-
ond row left-hand passenger foot-
well (open by turning the screw a
quarter of a turn).
Connect the compressor's elec-
tric plug to the vehicle's 12 V
socket.
Start the vehicle and leave the
engine running.
This repair kit is available from
CITROËN dealers.
XI
It is designed to repair holes of
a maximum diameter of 4 mm,
located exclusively on the tyre
tread or shoulder. Avoid remov-
ing any foreign bodies which have
penetrated the tyre.
ers.org
167