Advertisement

Advertisement

Comfort -> Boot fittings for Your Citroen C4 Grand Picasso SUV Second Generation (2013-2022)

Comfort  
Boot ttings  
1. Rear parcel shelf  
(see details on a following page)  
2. Hooks  
(see details on a following page)  
3. Torch  
(see details on a following page)  
4. Storage boxes  
(see details on a following page)  
5. Storage net  
3
6. Lashing eyes  
7. 12 V socket (maximum power: 120 Watts)  
Versions with storage boxes: these  
boxes must be put in place before  
loading the boot.  
129  
 
Comfort  
Rear parcel shelf  
Hooks  
Storage boxes  
To remove the shelf:  
The hooks can be used to secure shopping  
bags.  
Remove the boot carpet for access to the  
storage boxes.  
unhook the two cords,  
raise the shelf slightly, then remove it.  
Depending on the configuration, they are laid  
out for storing:  
There are several options for storing the shelf:  
-
-
-
wheel chocks,  
a tyre repair kit,  
two warning triangles,  
...  
-
-
either upright behind the front seats,  
or flat at the base of the boot.  
130  
 
Comfort  
Boot ttings  
1. Luggage cover blind  
(see details on a following page)  
2. Torch  
(see details on a following page)  
3. Concertina boards  
4. Lashing eyes  
3
5. 12 V socket (maximum power: 120 Watts)  
6. Arm rest with cup holder and storage space  
7. Retaining straps  
8. Location for stowing the luggage cover  
blind  
9. Open storage  
131  
 
Comfort  
Luggage cover roller  
In the 5-seat configuration, it is installed behind  
the second-row seats, with the third-row seats  
folded away.  
In the 7-seat configuration, it is stowed behind  
the third row seats.  
Installation  
Removal  
Position the left and right hand ends of the  
Disengage the roller guides from the rails  
roller in cut-out A, with the mobile flap at  
the front.  
Pull out the blind until it reaches the boot  
pillars.  
Insert the guides of the blind into the rails  
on the pillars B  
in the pillars B.  
Guide the blind as it is reeled in.  
Unlock the roller by pressing one of  
the grips located at the ends of the reel  
support.  
The mobile flap allows passengers in  
the second row to place their seats in  
the "comfort" position.  
132  
 
Comfort  
3
Stowing behind the 3rd row seats  
To fold the 3rd row seats with the roller  
stowed at the rear, it is necessary to raise the  
concertina boards in order to allow access to  
the seat locking controls (red straps).  
Ensure that the 3rd row seats are folded.  
Fold the first two concertina boards.  
Install the roller in the space above the arm  
rest, one side after the other, inclining it  
slightly.  
Slide the roller as far as it will go, up to the  
cut-outs provided at the back of the boot,  
with the two flaps directed downwards.  
Unfold the third row seats.  
The folded concertina boards can be positioned  
horizontally or vertically.  
133  
 
Comfort  
Torch  
This is a removable lamp, fitted in the side of  
the boot, which can be used to illuminate the  
boot or as a torch.  
Use  
Extract the torch from its location by pulling  
it from the front.  
Press the switch, located on the back, to  
switch the torch on or off.  
Unfold the support, located on the back, to  
set down and raise the torch; for example,  
when changing a wheel.  
Operation  
Storing  
This torch operates with NiMH type  
rechargeable batteries.  
Put the torch back in place in its location  
starting with the rear.  
It has a battery life of approximately 45 minutes  
and charges while you are driving.  
If you have forgotten to switch off the torch,  
this switches it off automatically.  
Observe the polarities when fitting the  
batteries.  
Never replace the rechargeable  
batteries with single-use batteries.  
It the torch is not engaged correctly, it  
may not charge and may not come on  
when the boot is opened.  
134