Get Comfort -> Front seats Guide for Citroen C4 Grand Picasso SUV Second Generation (2013-2022)

Comfort

Front seats

Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to

adapt your position for ease of driving and comfort.

As a safety measure, seat adjustments should only be done when stationary.

Manual adjustments

Forwards-backwards

Driver's seat backrest angle

Driver's seat height

ꢀ

Raise the control bar and slide the seat

forwards or backwards.

ꢀ

Turn the knob to adjust the seat backrest.

ꢀ

Pull the control upwards to raise or push

it downwards to lower, as many times as

necessary, to obtain the position required.

When the seat is in the correct position, push

it forwards and backwards without raising the

control bar to check that the it has latched.

84

Comfort

3

Passenger's seat backrest angle

Table position for the

passenger's seat backrest

ꢀ

Pull the control upwards to adjust the

backrest.

This position, associated with the position of

the rear seats, allows you to carry long objects

inside the vehicle.

Check that there is no object that could

interfere with the movement of the seat,

both above and below.

When the backrest angle is correct, release the

control.

ꢀ

Place the head restraint in the low position,

raise the armrest and fold the fixed table

onto the back of the seat.

Pull the control fully up and tip the backrest

forwards.

When the backrest is at the correct angle,

release the control lever. To ensure that the

backrest does not suddenly fold forwards

and hurt you, restrain it with your back or

your hand while operating the control.

To return to the normal position, guide the

backrest backwards until it locks.

85

Comfort

Front seats

Electric adjustments

Forwards-backwards (driver's

seat)

Seat backrest angle

Seat cushion height and angle

ꢀ

Tilt the control forwards or rearwards to

adjust the angle of the seat backrest.

ꢀ

Operate the rear part of the control

upwards or downwards to obtain the

desired height.

ꢀ

Push the control forwards or rearwards to

slide the seat.

ꢀ

Operate the front part of the control

upwards or downwards to obtain the

desired angle.

To avoid discharging the battery, carry out

these adjustments with the engine running.

86

Comfort

Storing driving positions

Storing a position

Recalling a stored position

Ignition on or engine running

Using buttons M / 1 / 2

3

ꢀ

Switch on the ignition.

ꢀ

Press button 1 or 2 to recall the

corresponding position.

An audible signal confirms that adjustment

is complete.

Adjust your seat and the door mirrors.

Press button M, then press button 1 or 2

within four seconds.

An audible signal indicates that the position

has been stored.

Storing a new position cancels the previous

position.

You can interrupt the current movement by

pressing button M 1 or 2 or by using one of the

seat controls.

A stored position cannot be recalled while

driving.

System which registers the electrical settings

of the driver's seat and door mirrors. It enables

you to store and recall two positions using the

buttons on the side of the driver's seat.

Recalling stored positions is deactivated

45 seconds after switching off the ignition.

87

Comfort

Additional adjustments

Head restraint height and angle

(depending on version)

Removing a head restraint

Comfort head restraints

Depending on version, you can fold the sides to

obtain a more comfortable position.

ꢀ

To raise a head restraint, pull it upwards.

To lower the head restraint, press the lug A

and the head restraint at the same time.

To adjust the angle of the head restraint, tilt

its lower part forwards or rearwards.

ꢀ

To remove the head restraint, press the

lug A and pull the head restraint upwards.

To put the head restraint back in place,

engage the head restraint stems in the

openings keeping them in line with the seat

back and press the lug A at the same time.

ꢀ

The head restraint is fitted with a frame with

notches which prevents it from lowering; this is

a safety device in case of impact.

The adjustment is correct when the upper

edge of the head restraint is level with the

top of the head.

Never drive with the head restraints

removed; they must be in place and

adjusted correctly.

88

Comfort

Electric lumbar adjustment

Massage function

3

ꢀ

Press the control to obtain the desired

lumbar support.

Activation

Deactivation

You can deactivate the massage

ꢀ

Press this switch.

function at any time by pressing this

switch, its indicator lamp goes off.

Its indicator lamp comes on and the massage

function is activated for a period of 1 hour.

During this time, massage is performed in

6 cycles of 10 minutes (6 minutes of massage

followed by 4 minutes break).

This function provides the front occupants

with a lumbar massage. It only operates when

the engine is running or in STOP mode of the

Stop & Start system.

After one hour, the function is deactivated, the

indicator lamp goes off.

Adjustment of intensity

Press this button to select one of

the two levels of massage intensity

offered.

89

Comfort -> Front seats for Your Citroen C4 Grand Picasso SUV Second Generation (2013-2022)

Related Topics

Comfort

Popular Owner Manuals

Latest Owner Manuals