Get Comfort -> Second-row seats Guide for Citroen C4 Grand Picasso SUV Second Generation (2013-2022)

Comfort

Second-row seats

The 3 seats in the 2^ndrow are independent of each other and are all the same width. Their backrests can be folded to vary the load space in the boot.

Forwards-backwards adjustment

ꢀ

Raise the lever A, located at the front of

the seat cushion, and adjust the seat to the

desired position.

92

Comfort

"Comfort" position

Rear head restraints

3

The rear head restraints can be removed and

have two positions:

ꢀ

Pull the strap B and guide the seat

rearwards.

Comfort head restraints

Depending on version, the sides can be folded

to obtain a more comfortable position.

-

high, position for use,

low, storage position.

The backrest reclines and the seat base pivots

slightly.

To raise a head restraint, pull it upwards.

To lower it, press lug A then the head restraint.

Never drive with the head restraints

removed; they must be in place and

correctly adjusted.

Returning the seat to the initial

position

To remove it:

ꢀ

Pull the strap B and guide the seat

-

move the head restraint to the high position,

press lug A pulling the head restraint

upwards at the same time.

forwards.

Supervise any movements of seats

when made by children.

To refit it:

engage the rods of the head restraint in the

-

openings keeping then in line with the seat

back.

93

Comfort

Flat floor

Each seat can be folded onto the floor to vary

the the space available in the boot.

Folding a seat

ꢀ

Place the seats in the fully back position.

From the outside

From the boot, when loading for example

You can fold the second-row seats from the

boot, after first folding the third-row seats.

ꢀ

Pull firmly upwards on strap C, as indicated

by the arrow, to unlock the seat; keep

pulling until the seat is fully folded.

Push the seat backrest gently forwards

so that the backrest folds onto the seat

cushion. The assembly lowers onto the

floor.

ꢀ

Pull on the strap D to release the seat in

question then push forwards lightly on the

backrest.

To avoid any damage to the mechanism,

the strap D unclips if too much force is

applied. Simply clip it in place again for the

system to be operational again.

94

Comfort

3

Repositioning a seat

Continuity panels

Each seat has a continuity panel at the bottom

of the backrest, that once unfolded:

Releasing / locking the continuity panels

ꢀ

If necessary, straighten the continuity

panels for the seats in the 2^ndrow and lock

them in place.

Raise the backrest and push it rearwards

until it locks in position

ꢀ

Before unfolding the continuity panels,

check that the seats in the 2^ndrow are fully

back.

-

provides a continuous load surface in the

boot, whatever the position of the seats,

avoids objects sliding under the seats in

the 2^ndrow.

ꢀ

-

ꢀ

Slide the continuity panel latch upwards to

release.

Straighten the continuity panel, then slide

the latch downwards to lock it.

Before operating the rear seats, check

that the outer rear seat belts are not

loose, to avoid damaging them. The

centre belt must be stowed. Fix the

tongues of the three belts to their

anchorage points.

These continuity panels are not

designed to support a weight greater

than 30 kg.

95

Comfort

Access to the third row

seats

Access to the third-row seats is via the outer

second-row seats.

Leaving the vehicle from

the third-row seats

Repositioning a seat, from

the outside, with the door

open

If there are passengers seated in the third row:

ꢀ

manually return the assembly as far

as possible rearwards; the seat does

not return to the fully back position, so

as to retain legroom for the third-row

passengers,

ꢀ

fold the seat cushion until it locks.

Ensure that there is no object on or under the

seat that you want to move.

ꢀ

Lift the lever E. The seat unlocks and

the seat cushion comes up against the

backrest.

Push the seat backrest, still holding the

lever E in the raised position.

ꢀ

Pull the lever E. The seat unlocks and

the seat cushion comes up against the

backrest.

Hold the lever E in the raised position,

pushing forwards. The whole seat slides

towards the front seat.

In the event of a failure of this system

(lever E), the passengers in the third

row can also leave the vehicle after first

folding the backrests of the second-row

seats using the strap D

Space becomes free behind the seat, the third-

row passengers can get to their seats.

Do not allow children to operate the

seats without supervision.

Before operating the seats, ensure that

the tables on the back of the first-row

seats are folded away.

96

Comfort -> Second-row seats for Your Citroen C4 Grand Picasso SUV Second Generation (2013-2022)

Related Topics

Comfort

Popular Owner Manuals

Latest Owner Manuals