Get Audio and Telematics -> MyWay Guide for Citroen C4 Picasso SUV First Generation (2006-2013)

MyWay

MULTIMEDIA AUDIO SYSTEM/BLUETOOTH TELEPHONE

SATELLITE NAVIGATION SYSTEM FOR EUROPE BY SD CARD

CONTENTS

The MyWay is protected in such a way that it will only

operate in your vehicle.

p.

276

277

278

281

289

291

292

295

298

299

303

01 First steps

02 Steering mounted controls

03 General operation

04 Navigation - Guidance

05 Traffic information

06 Radio

07 Music media players

08 Bluetooth telephone

09 Configuration

For safety reasons, the driver must carry out operations

which require prolonged attention while the vehicle is

stationary.

When the engine is switched off and to prevent

discharging of the battery, the MyWay switches off

following the activation of the Energy Economy mode.

10 Screen menu map

Frequently asked questions

Certain functions described in this handbook will

become available during the year.

275

01

Engine not running:

-

Short press: on/off.

Long press: pause with CD

play, mute for radio.

Long press: audio settings: front/rear

fader, left/right balance, bass/treble,

musical ambience, loudness, automatic

volume, reinitialise settings.

Selection dial for the

screen display and

according to the menu.

Access to the

"SETUP" menu.

Engine running:

-

Short press: contextual

menu or conﬁrm.

Long press: contextual

menu speciﬁc to the list

displayed.

Short press: pause with CD

play, mute for radio.

Long press: reinitialise the

system.

Access to the

Long press: GPS

coverage and

demonstration

mode.

Radio Menu.

Display the list of

stations.

Access to the

Music Menu.

Display tracks.

Access to the Phone

Menu. Display the list of

calls.

-

Eject CD.

Adjust volume (each source

is independent, including

navigation messages and

alerts).

Select previous/next radio

station.

Select previous CD or MP3

track.

Select previous/next line in

a list.

Buttons 1 to 6:

Select previous/next radio

station in the list.

Select a pre-set radio

station.

Select previous/next MP3

folder.

Long press: pre-set the

current station.

Select previous/next page in

a list.

Access to the "MODE" menu.

Select successive display of:

Radio, Map, NAV (if navigation in progress),

Telephone (if conversation in progress), Trip

computer.

Access to the

Reader for

navigation SD

card only.

Access to the

ESC: abandon current operation.

Navigation

Menu. Display

recent

Trafﬁc Menu.

Display the current

trafﬁc alerts.

destinations.

Long press: Black screen (DARK).

276

STEERING MOUNTED CONTROLS

02

1

5

1

5

3

4

2

3

2

1. Volume increase.

2. Volume decrease.

3. Successive presses mute/restore the sound.

4. Rotation - associated with a pop-up.

Radio - access the 6 stored stations: next or

previous.

Music players: previous/next track.

5. Radio: next station.

1. Press.

1. Short press: provides access to the menu

according to the display on the screen.

2. Successive presses: provides access

according to the current display on the

screen.

Repeat the current spoken navigation

instruction.

2. Short press to make a telephone call.

Pick up/Hang up.

Access the telephone menu.

Display the call list.

Long press to reject an incoming call.

3. Personalisation.

MAP/NAV (if navigation is in progress), TEL

(if a conversation is in progress), RADIO or

MEDIA in progress, Trip computer.

Long press: switch to black screen - Dark

(night driving).

Music players: next track.

Touching a control restores the display.

3. ESC: abandon the current operation.

Short press to conﬁrm the choice made

using the dial.

4. Rotation.

4. Rotation: selects the access to the short-cut

menus according to the current display.

Scroll through the call list in the phone book.

Personalisation selection.

5. Conﬁrms the choice displayed on the

screen.

277

03 GENERAL OPERATION

Press the MODE button several times in succession for access to the following menus:

RADIO/MUSIC MEDIA

PLAYERS

FULL SCREEN MAP

TELEPHONE

(If a conversation is in progress)

NAVIGATION

(If guidance is in progress)

TRIP COMPUTER

SETUP:

system language*, date and time*, display,

vehicle settings*, unit and system settings, "Demo

mode".

TRAFFIC:

TMC information and messages.

* Available according to model.

For cleaning the screen, the use of a soft, non-abrasive cloth

(spectacles cloth) is recommended, with no additional product.

For a detailed global view of the menus available, refer to the

"Screen menu map" section.

278

03

DISPLAY ACCORDING TO THE CONTEXT

NAVIGATION (IF GUIDANCE IS IN

PROGRESS):

TRIP COMPUTER:

A press on the OK dial gives access to

short-cut menus according to the display

on the screen.

Abort guidance

Repeat advice

Block road

Route info

Show destination

Trip info

Alert log

1

Status of functions

1

TELEPHONE:

2

End call

1

Hold call

1

Route type

3

Dial

1

Avoid

DTMF-Tones

1

Satellites

Private mode

1

Zoom/Scroll

Voice advice

Route options

2

Micro off

1

279

GENERAL OPERATION

03

DISPLAY ACCORDING TO THE CONTEXT

MUSIC MEDIA PLAYERS:

RADIO:

In FM mode

FULL SCREEN MAP:

Trafﬁc info (TA)

Abort guidance/Resume guidance

1

Play options

Trafﬁc info (TA)

RDS

Set destination

POIs nearby

Position info

Map settings

Zoom/Scroll

1

2

1

Normal order

2

Random track

Radiotext

Regional prog.

AM

2

Repeat folder

2

Scan

2

Select music

In AM mode

TA

1

2

Refresh AM list

FM

280

04

NAVIGATION - GUIDANCE

Insert the SD card in the front panel reader and leave it there to use the

Navigation functions.

The navigation SD card data must not be modiﬁed.

Map data updates are available from CITROËN dealers.

SELECTING A DESTINATION

1

4

Select the "Address input" function

and press the dial to conﬁrm.

Press the NAV button.

Address input

5

Once the country has been selected,

turn the dial and select the town

function. Press the dial to conﬁrm.

The list of the last 20 destinations appears under the Navigation

Menu function.

2

3

6

Press the NAV button again or select

the Navigation Menu function and

press the dial to conﬁrm.

Select the letters of the town one

by one conﬁrming each time by

pressing the dial.

Navigation Menu

Select the "Destination input"

function and press the dial to

conﬁrm.

A pre-set list (by entering the ﬁrst few letters) of the towns in the

country selected can be accessed via the LIST button on the virtual

keypad.

Destination input

281

04

NAVIGATION - GUIDANCE

7

9

Turn the dial and select OK.

Press the dial to conﬁrm.

Then select "Start route guidance"

and the press the dial to conﬁrm.

Start route guidance

To speed up the process, the post code can be entered directly

after selecting the "Postal code" function.

Use the virtual keypad to enter the letters and digits.

Select the route type:

"Fast route", "Short route" or "Optimized route" and press the dial

8

to conﬁrm.

Repeat steps 5 to 7 for the "Street"

and "House number" functions.

It is also possible to select a destination via "Choose from address

book" or "Choose from last destinations".

Choose from address book

Choose from last destinations

Select the "Save to address book" function to record the address

entered in a directory ﬁle. Press the dial to conﬁrm the selection.

Map settings

MyWay allows up to 500 contact ﬁles to be recorded.

You can zoom in/zoom out on the map using the dial.

It is possible to move the map or select its orientation via the short-

cut menu of the FULL SCREEN MAP.

Press MODE until the map is displayed full screen. Press the dial

then select "Map settings". Select "2.5D Map" or "2D Map" and in

the latter case, select "North Up" or "Heading Up".

During guidance, pressing this button

repeats the last guidance instruction.

To clear a destination; from steps 1 to 3, select "Choose from last destinations".

A long press on one of the destinations displays a list of actions from which you can select:

Delete entry

Delete list

282

04

NAVIGATION - GUIDANCE

SETTING AND NAVIGATING TO MY

"HOME ADDRESS"

4

To be set as the "Home address", an address must ﬁrst be

entered in the address book, for example from "Destination

input"/"Address input" then "Save to address book".

Select your home address and conﬁrm.

Then select "Edit entry" and conﬁrm.

Edit entry

1

2

3

Press the NAV button twice to display

the Navigation Menu.

5

Navigation Menu

Select "Set as home address" and

conﬁrm to save.

Select "Destination input" and conﬁrm.

Then select "Choose from address

book" and conﬁrm.

Set as "Home address"

Destination input

To start navigation towards "Home address", press NAV twice

to display the Navigation Menu, select "Destination input" and

conﬁrm.

Select "Address book" and conﬁrm.

Then select "Search entry (complete

address book)" and conﬁrm.

Then select "Navigate HOME" and conﬁrm to start guidance.

Address book

283

04

NAVIGATION - GUIDANCE

The route selected by the MyWay system depends directly on the route

options.

ROUTE OPTIONS

Changing these options may change the route completely.

1

2

3

4

5

Select the "Route dynamics"

function.

Press the NAV button.

This function gives access to the

"Trafﬁc independent" or "Semi-

dynamic" options.

Route dynamics

Press the NAV button again or select

the Navigation Menu function and

press the dial to conﬁrm.

6

Select the "Avoidance criteria"

function. This function provides

access to the AVOID options

(motorways, toll roads, ferries).

Navigation Menu

Select the "Route options" function

and press the dial to conﬁrm.

Avoidance criteria

Route options

7

Turn the dial and select the

"Recalculate" function to take into

account the route options selected.

Press the dial to conﬁrm.

Select the "Route type" function

and press the dial to conﬁrm. This

function allows you to change the

route type.

Recalculate

Route type

284

04

NAVIGATION - GUIDANCE

Stopovers can be added to the route once the destination has been

selected.

ADDING A STOPOVER

1

2

3

4

5

Enter a new address, for example.

Press the NAV button.

Address input

6

Press the NAV button again or select

Once the new address has been

entered, select OK and press the dial

to conﬁrm.

the Navigation Menu function and

press the dial to conﬁrm.

Navigation Menu

OK

7

Select "Recalculate" and press the

dial to conﬁrm.

Select the "Stopovers" function and

press the dial to conﬁrm.

Stopovers

Recalculate

Select the "Add stopover" function

(5 stopovers maximum) and press

the dial to conﬁrm.

The stopover must be completed or deleted in order for the

guidance to continue to the next destination. Otherwise, the

MyWay will always return you to the previous stopover.

Add stopover

285

04

NAVIGATION - GUIDANCE

SEARCHING FOR POINTS OF INTEREST

(POI)

The points of interest (POI) indicate all of the service locations in the

vicinity (hotels, various businesses, airports...).

Select the "POI in city" function to

search for POIs in the city required.

Select the country then enter the

name of the city using the virtual

keypad.

1

2

3

4

5

6

Press the NAV button.

POI in city

Press the NAV button again or select

the Navigation Menu function and

press the dial to conﬁrm.

A list of cities present in the country selected can be accessed via

the LIST button on the virtual keypad.

Navigation Menu

Select the "POI search" function and

press the dial to conﬁrm.

7

8

POI search

Select the "POI in country" function

to search for POIs in the country

required.

Select the "POI nearby" function to

search for POIs around the vehicle.

POI in country

POI nearby

Select the "POI near route" function

to search for POIs near the route.

Select the "POI near destination"

function to search for POIs near the

point of arrival of the route.

POI near route

POI near destination

286

This icon appears when several POIs are grouped

together in the same area. Zooming in on this icon

shows details of the POIs.

04 NAVIGATION - GUIDANCE

LIST OF PRINCIPAL POINTS OF INTEREST (POI)

Service station

Cinema

Airport

Theme parks

LPG station

Garage

Railway station

Bus station

Hospital

CITROËN

Port

Pharmacy

Police station

Motor racing circuit

Covered car park

Industrial estate

Supermarket

School

Car park

Post ofﬁce

Museum

Bank

Rest area

Hotel

Vending machine

Tennis court

Swimming pool

Golf course

Tourist information

Restaurant

Refreshment area

Automatic speed camera*

Red light camera*

Risk area*

Picnic area

Cafeteria

Winter sports resort

Theatre

* According to availability in the country.

287

04

NAVIGATION - GUIDANCE

To activate or deactivate vocal guidance, with guidance active and

the map displayed in the screen, press the dial and then select or

deselect "Voice advice".

NAVIGATION SETTINGS

Voice advice

1

2

3

4

The adjustment of the volume for the Risk Areas POIs is used only

during the transmission of an alert.

Press the NAV button.

5

6

Select the "POI categories on Map"

function to select the POIs to be

displayed on the map by default.

Press the NAV button again or select

POI categories on Map

the Navigation Menu function and

press the dial to conﬁrm.

Select "Set parameters for risk

areas" for access to the "Display

on map", "Visual alert" and "Sound

alert" functions.

Navigation Menu

Select the "Settings" function and

press the dial to conﬁrm.

Set parameters for risk areas

Settings

UPDATING POIs

Select the "Navi volume" function

and turn the dial to set the volume

of each voice synthesiser (trafﬁc

information, alert messages…).

The detailed procedure for updating POIs is available at the

following internet address: citroen.navigation.com.

This requires an SDHC (High Capacity) compatible reader.

Navi volume

288

TMC (Trafﬁc Message Channel) messages contain information on

trafﬁc and weather conditions, received in real time and transmitted to

the driver in the form of audible announcements and symbols on the

navigation map.

05 TRAFFIC INFORMATION

The navigation system can then suggest an alternative route to avoid a

trafﬁc problem.

CONFIGURE THE FILTERING AND

DISPLAY OF TMC MESSAGES

1

4

Select the "Geo. Filter" function and

press the dial to conﬁrm.

Press the TRAFFIC button.

Geo. Filter

5

Then select the radius of the ﬁlter in

The list of TMC messages appears under the Trafﬁc Menu sorted

in order of proximity.

miles (km) required in accordance

with the route, press the dial to

conﬁrm.

When all of the messages on the

route are selected, the addition of a

geographical ﬁlter is recommended

(within a radius of 3 miles (5 km) for

example) to reduce the number of

messages displayed on the map.

The geographical ﬁlter follows the

movement of the vehicle.

2

3

Press the TRAFFIC button again or

select the Trafﬁc Menu function and

press the dial to conﬁrm.

Trafﬁc Menu

Select the ﬁlter of your choice:

Messages on route

All warning messages

Only warnings on route

All messages

The ﬁlters are independent and their results are cumulative.

We recommend a ﬁlter on the route and a ﬁlter around the vehicle of:

-

2 miles (3 km) or 3 miles (5 km) for a region with heavy trafﬁc,

6 miles (10 km) for a region with normal trafﬁc,

30 miles (50 km) for long journeys (motorway).

The messages appear on the map

and on the list.

To exit, press ESC.

289

05

TRAFFIC INFORMATION

PRINCIPAL TMC SYMBOLS

RECEIVING TA MESSAGES

Black and blue triangle: general information, for example:

1

-

the station transmits TA messages.

the station does not transmit TA messages.

TA messages are not activated.

The TA (Trafﬁc Announcement) function gives priority to TA alert

messages. To operate, this function needs good reception of a

radio station transmitting this type of message. When a trafﬁc

report is transmitted, the current audio source (Radio, CD, ...) is

interrupted automatically to play the TA message. Normal playback

of the audio source resumes at the end of the transmission of the

message.

Red and yellow triangle: trafﬁc information, for example:

2

1

With the current audio source

displayed on the screen, press the

dial.

2

3

The shortcut menu for the source appears and gives access to:

TA

Select Trafﬁc Announcements (TA)

and press the dial to conﬁrm and go

to the associated settings.

290

The external environment (hill, building, tunnel, underground car park...)

may interfere with the reception, including in RDS following mode. This

phenomenon is a normal result of the way in which radio waves are

transmitted and does not in any way indicate a failure of the audio equipment.

06

RADIO

SELECTING A STATION

RDS - REGIONAL MODE

1

When the current radio station is

displayed on the screen, press the

dial.

Press the RADIO button to display

the list of stations received locally

sorted in alphabetical order.

Select the station required by turning

the dial and press to conﬁrm.

The radio source short-cuts menu appears and provides access to

the following short-cuts:

2

TA

RDS

While listening to the radio, press one of the

buttons to select the previous or next station on

the list.

Radiotext

Regional prog.

AM

3

A long press of one of the buttons starts the

automatic search for a station with a lower or

higher frequency.

Select the function required and

press the dial to conﬁrm to gain

access to the corresponding settings.

RDS, if displayed, allows you to continue listening to the same

station by automatic retuning to alternative frequencies. However,

in certain conditions, coverage of an RDS station may not be

assured throughout the entire country as radio stations do not

cover 100 % of the territory. This explains the loss of reception of

the station during a journey.

Press one of the buttons on the numeric keypad for more than

2 seconds to store the current station.

Press the button on the numeric keypad to recall the stored radio

station.

291

07

MUSIC MEDIA PLAYERS

CD, MP3/WMA CD

INFORMATION AND ADVICE

The MyWay will only play audio ﬁles with the extension ".mp3"

with a speed of between 8 Kbps and 320 Kbps and the extension

".wma" with a speed of between 5 Kbps and 384 Kbps.

It also supports the VBR (Variable Bit Rate) mode.

No other type of ﬁle (.mp4, .m3u...) can be played.

The MP3 format, an abbreviation of MPEG 1, 2 & 2.5 Audio Layer 3

and the WMA format, an abbreviation of Windows Media Audio and

the property of Microsoft, are audio compression standards which

permit the recording of several tens of music ﬁles on a single disc.

In order to be able to play a recorded CDR or CDRW, when

recording it is preferable to select the ISO 9660 level 1, 2 or Joliet

standard.

If the disc is recorded in another format it may not be played

correctly.

It is recommended that the same recording standard is always

used for an individual disc, with as low a speed as possible

(4x maximum) for optimum sound quality.

It is advisable to restrict ﬁle names to 20 characters, without

using special characters (e.g.: " ? ; ù) to avoid any play or display

problems.

In the particular case of a multi-session CD, the Joliet standard is

recommended.

292

07

MUSIC MEDIA PLAYERS

SELECTING/PLAYING MUSIC

CD, MP3/WMA CD

1

4

5

6

Select the music source required:

CD, MP3/WMA CD. Press the dial to

conﬁrm. Play begins.

Press the MUSIC button.

Press the up or down button to select

the next/previous folder.

The list of tracks or MP3/WMA ﬁles appears under Music Menu.

2

3

Press the MUSIC button again or

select the Music Menu function and

press the dial to conﬁrm.

Press one of the buttons to select a

music track.

Press and hold one of the buttons for

fast forward or rewind play.

Music Menu

Select the "Select music" function

and press the dial to conﬁrm.

The playing and displaying of an MP3/WMA compilation may

depend on the recording programme and/or the settings used.

We recommend the ISO 9660 ﬁle standard.

Select music

293

07

MUSIC MEDIA PLAYERS

USING THE EXTERNAL INPUT (AUX)

JACK/USB AUDIO CABLE NOT SUPPLIED

1

2

Connect the portable device (MP3/

WMA player…) to the auxiliary JACK

socket or to the USB port, using a

suitable audio cable.

Press the MUSIC button then

press it again or select the Music

Menu function and press the dial to

conﬁrm.

Music Menu

3

4

Select the "External device" function

and press the dial to activate it.

External device

Select the AUX music source and

press the dial to conﬁrm. Play begins

automatically.

The display and management of the controls is via the portable

device.

294

08 BLUETOOTH TELEPHONE

* The services available depend on the network, the SIM card and the

PAIRING A TELEPHONE

FIRST CONNECTION

compatibility of the Bluetooth telephone used. Check the telephone

manual and with your network provider for details of the services

available to you.

3

For a ﬁrst connection, select

"Search phone" and press the dial to

conﬁrm. Then select the name of the

telephone.

For reasons of safety and because they require prolonged attention

on the part of the driver, the operations for pairing the Bluetooth

mobile telephone to the hands-free system of the MyWay must be

carried out with the vehicle stationary. The ignition must be on.

Search phone

4

Enter the authentication code on the telephone.

The code to be entered is displayed on the screen

of the system.

Visit www.citroen.co.uk for more information (compatibility, more

help, ...).

Some telephones offer automatic reconnection of

the telephone every time the ignition is switched on.

A message conﬁrms the pairing.

1

2

Pairing can also be started from the telephone (refer to the

telephone instructions).

Activate the telephone's Bluetooth function

and ensure that it is "visible to all" (refer to the

telephone instructions).

Once the telephone has been connected, MyWay can synchronise

the address book and the call list. This synchronisation may take a

few minutes*.

To change the telephone connected,

press the PHONE button, then select

Phone Menu and press the dial to

conﬁrm.

Press the PHONE button.

295

08 BLUETOOTH TELEPHONE

* The services available depend on the network, the SIM card and the

compatibility of the Bluetooth telephone used. Check the telephone

manual and with your network provider for details of the services

available to you.

CONNECTING A TELEPHONE

For reasons of safety and because they require prolonged attention

on the part of the driver, the operations for pairing the Bluetooth

mobile telephone to the hands-free system of the MyWay must be

carried out with the vehicle stationary. The ignition must be on.

Once the telephone has been connected, MyWay can synchronise

the address book and the call list. This synchronisation may take a

few minutes*.

1

Visit www.citroen.co.uk for more information (compatibility, more

help, ...).

When a telephone is already

connected, to change it press the

PHONE button, then select Phone

Menu and press the dial to conﬁrm.

Activate the telephone's Bluetooth function

and ensure that it is "visible to all" (refer to the

telephone instructions).

The last telephone connected is reconnected

automatically.

1

2

Select "Connect phone". Select the

telephone and press to conﬁrm.

A message conﬁrms the connection.

Connect phone

Press the PHONE button.

The list of telephones connected previously (4 maximum) appears

on the multifunction screen. Select the telephone required for a

new connection.

296

08 BLUETOOTH TELEPHONE

RECEIVING A CALL

MAKING A CALL

1

2

3

1

Press the PHONE button.

An incoming call is announced by a ring and a superimposed

display on the multifunction screen.

The list of the last 20 calls made and received in the vehicle

appears under Phone Menu. You can select a number and press

the dial to make the call.

Select the Phone Menu function and

press the dial to conﬁrm.

2

to refuse and conﬁrm by pressing

the dial.

Phone Menu

Select "Dial number", then dial the

telephone number using the virtual

keypad.

Yes

No

Dial number

To hang up, press the PHONE button

or press the dial and select "End call"

then conﬁrm by pressing the dial.

It is also possible to select a number from the address book. You

can select "Dial from address book". The MyWay can record up to

1 000 entries (telephone numbers).

Press the end of the steering mounted control for more than two

seconds to gain access to the address book.

End call

It is possible to make a call directly from the telephone; park the

vehicle as a safety measure.

A short press on the steering mounted

TEL button accepts the incoming call

or ends the call in progress. A long

press rejects the incoming call.

To delete a number, press the PHONE button then press and hold

on a call number to display a list of actions including:

Delete entry

Delete list

297

09 CONFIGURATION

The SETUP function gives access to the following options: System

language, Date & Time, Display (Brightness, Colour, Map colour), Vehicle,

Units, System.

SETTING THE DATE AND TIME

These settings must be entered again if the battery has been

disconnected.

5

Select the "Date format" function and

1

2

3

4

press the dial to conﬁrm.

Press the SETUP button.

6

Select the "Date & Time" function

and press the dial to conﬁrm.

Conﬁrm the format required using

the dial.

Select the "Time format" function and

press the dial to conﬁrm.

Date & Time

Select the "Set date & time" function

and press the dial to conﬁrm.

Conﬁrm the format required using the dial.

Pressing the SETUP button for more than 2 seconds gives

access to:

Set date & time

Description of the unit

GPS coverage

Adjust the settings one by one using

the direction arrows and conﬁrm by

means of the dial.

Demo mode

298

10

SCREEN MENU MAP

Vocal

Within 6 miles (10 km)

4

3

MAIN FUNCTION

1

Loudness

Within 30 miles (50 km)

Within 60 miles (100 km)

3

OPTION A

option A1

option A2

OPTION B...

2

Speed dependent volume

Reset sound settings

3

RADIO

2

"Music" Menu

1

"Radio" Menu

1

Select music

Sound settings

Balance/Fader

Bass/Treble

Equalizer

2

Waveband

FM

2

"Traffic" Menu

1

3

Messages on route

Only warnings on route

All warning messages

All messages

2

AM

Manual tune

Sound settings

Balance/Fader

Bass/Treble

Equalizer

Linear

2

Linear

4

Classic

Jazz

3

4

Geo. Filter

Within 2 miles (3 km)

Within 3 miles (5 km)

3

Rock/Pop

Techno

4

299

Classic

Start route guidance

Postal code

Rearrange route

Replace stopover

Delete stopover

Recalculate

4

3

Jazz

Rock/Pop

Save to address book

Intersection

Techno

Vocal

City district

Fast route

4

Loudness

3

Geo position

Short route

4

Speed dependent volume

Reset sound settings

Map

Optimized route

POI search

Navigate HOME

Choose from address book

Choose from last destinations

TMC station information

Stopovers

3

2

POI nearby

3

POI near destination

POI in city

3

"Navigation" Menu

1

Abort guidance/Resume guidance

Destination input

2

POI in country

POI near route

Route options

Route type

2

Add stopover

3

Enter new address

Country

3

Address input

4

2

4

Navigate HOME

City

3

4

Choose from address book

Choose from last destinations

Fast route

Street

4

House number

Short route

4

300

Optimized route

Route dynamics

Trafﬁc independent

Semi-dynamic

4

"Phone" Menu

"SETUP" menu

1

3

System language*

Deutsch

4

2

Dial from address book

Call lists

3

Avoidance criteria

Avoid motorways

Avoid toll roads

Avoid ferries

English

3

Connect phone

Search phone

Español

4

Français

3

Phones connected

Disconnect phone

Italiano

Recalculate

Nederlands

Polski

3

4

Settings

Rename phone

Delete pairing

Delete all pairings

Show details

2

4

Navi volume

Portuguese

Date & Time*

Set date & time

Date format

Time format

3

POI categories on Map

Set parameters for risk areas

Display on map

2

3

Settings

4

2

Visual alert

Sound alert

Select ring tone

4

3

Phone/Ring tone volume

Enter mailbox number

* Available according to model.

301

Display

Units

2

Brightness

Colour

Temperature

3

Celsius

3

4

Pop titanium

Fahrenheit

4

Toffee

Metric/Imperial

3

4

Blue steel

Kilometres (Consumption: l/100)

4

Technogrey

Kilometres (Consumption: km/l)

4

Dark blue

Miles (Consumption: MPG)

4

Map colour

System

2

3

Day mode for map

Night mode for map

Auto. Day/Night for map

Factory reset

Software version

Automatic scrolling

4

3

Vehicle**

2

Vehicle information

3

Alert log

4

Status of functions

4

** The parameter settings vary according to vehicle.

302

FREQUENTLY ASKED QUESTIONS

QUESTION

ANSWER

SOLUTION

There is a difference in

sound quality between

the different audio

For optimum sound quality, the audio settings (Volume, Bass, Treble,

Ambience, Loudness) can be adapted to the different sound sources,

which may result in audible differences when changing source (radio,

CD...).

Check that the audio settings (Volume, Bass,

Treble, Ambience, Loudness) are adapted to

the sources listened to. It is advisable to set

the AUDIO functions (Bass, Treble, Front-Rear

Balance, Left-Right Balance) to the middle

position, select the Linear musical ambience and

set the loudness correction to the "Active" position

in CD mode or to the "Inactive" position in radio

mode.

sources (radio, CD...).

The CD is ejected

automatically or is not

played by the player.

The CD is inserted upside down, is unplayable, does not contain any

audio data or contains an audio format which the player cannot play.

The CD is protected by an anti-pirating protection system which is not

recognised by the audio equipment.

-

Check that the CD is inserted in the player the

right way up.

Check the condition of the CD: the CD cannot

be played if it is too damaged.

Check the content in the case of a recorded

CD: consult the advice in the Audio section.

The audio equipment's CD player does not

play DVDs.

Because of their quality level, certain

writeable CDs will not be played by the audio

system.

The CD player sound is

poor.

The CD used is scratched or of poor quality.

Insert good quality CDs and store them in suitable

conditions.

The audio equipment settings (bass, treble, ambiences) are unsuitable.

Set the treble or bass level to 0, without selecting

an ambience.

303

QUESTION

ANSWER

An incorrect waveband is selected.

SOLUTION

The stored stations do

not function (no sound,

87.5 Mhz is displayed...).

Press the BAND AST button to return to the

waveband (AM, FM1, FM2, FMAST) on which the

stations are stored.

The quality of reception

of the radio station

listened to gradually

deteriorates or the stored

stations do not function

(no sound, 87.5 Mhz is

displayed...).

The vehicle is too far from the transmitter used by the station listened

to or there is no transmitter in the geographical area through which the

vehicle is travelling.

Activate the RDS function to enable the system

to check whether there is a more powerful

transmitter in the geographical area.

The environment (hills, buildings, tunnels, basement car parks...) block

reception, including in RDS mode.

This phenomenon is normal and does not indicate

a failure of the audio equipment.

The aerial is absent or has been damaged (for example when going

through a car wash or into an underground car park).

Have the aerial checked by a CITROËN dealer.

Sound cut-outs of 1 to

During this brief sound cut-out, the RDS searches for any frequency

Deactivate the RDS function if the phenomenon is

too frequent and always on the same route.

2 seconds in radio mode. permitting better reception of the station.

With the engine off,

the audio equipment

switches off after a few

minutes of use.

When the engine is switched off, the audio equipment operating time

Start the vehicle's engine to increase the battery

charge.

depends on the battery charge.

The switch-off is normal: the audio equipment switches to economy mode

and switches off to prevent discharging of the vehicle's battery.

304

QUESTION

ANSWER

SOLUTION

TA is selected. However,

certain trafﬁc jams

along the route are not

indicated in real time.

On starting, it is several minutes before the system begins to receive the

trafﬁc information.

Wait until the trafﬁc information is being received

correctly (displaying of the trafﬁc information

symbols on the map).

In certain countries, only major routes (motorways...) are listed for the

trafﬁc information.

This phenomenon is normal. The system is

dependent on the trafﬁc information available.

I receive a speed camera The system announces all speed cameras located in a conical zone

Zoom the map to view the exact position of the

alert for a camera which

is not on my route.

forward of the vehicle. It may detect speed cameras on nearby or parallel speed camera.

roads.

The audible speed

camera alert is not

working.

Audible alerts are not active.

Activate audible alerts in Navigation Menu,

Settings, Set parameters for risk areas.

The alert volume level is set to minimum.

Increase the speed camera alert volume.

The altitude is not

displayed.

On starting, the initialisation of the GPS may take up to 3 minutes to

receive more than 3 satellites correctly.

Wait until the system has started up completely.

Check that there is a GPS coverage of at least

3 satellites (long press on the SETUP button, then

select GPS coverage).

Depending on the geographical environment (tunnel...) or the weather,

the conditions of reception of the GPS signal may vary.

This phenomenon is normal. The system is

dependent on the conditions of reception of the

GPS signal.

The route is not

calculated successfully.

The exclusion criteria may conﬂict with the current location (exclusion of

toll roads on a motorway with tolls).

Check the exclusion criteria.

305

QUESTION

ANSWER

SOLUTION

There is a long waiting

When a new medium is inserted, the system reads a certain amount of

This phenomenon is normal.

time after inserting a CD. data (directory, title, artist, etc.). This may take a few seconds.

I cannot connect my

Bluetooth telephone.

The telephone's Bluetooth function may be deactivated or the equipment

may not be visible.

-

Check that your telephone's Bluetooth

function is activated.

Check that your telephone is visible.

A telephone connected

by Bluetooth is inaudible.

The volume level depends on both the system and the telephone.

Increase the MyWay volume setting, possibly to

maximum, and increase the telephone volume

level if necessary.

306

Audio and Telematics -> MyWay for Your Citroen C4 Picasso SUV First Generation (2006-2013)

Related Topics

Audio and Telematics

Popular Owner Manuals

Latest Owner Manuals