Get Audio and Telematics -> NaviDrive Guide for Citroen C4 Picasso SUV First Generation (2006-2013)

NaviDrive

MULTIMEDIA AUDIO/TELEPHONE SYSTEM

JUKEBOX FUNCTION (10 GB)/GPS (EUROPE)

CONTENTS

01 First steps

p.

232

233

02 Voice commands and

steering mounted controls

The NaviDrive is coded in such a way that it will only

operate in your vehicle.

03 Screen and main menu

04 Navigation - Guidance

05 Traffic information

06 Audio/Video

07 Telephone

08 Configuration

p.

235

239

249

251

260

264

265

271

For safety reasons, it is imperative that the driver carries

out operations which require prolonged attention while

the vehicle is stationary.

When the engine is switched off and to prevent

discharging of the battery, the NaviDrive may switch off

after a few minutes.

09 Screen menu map

Frequently asked questions

231

01

Selection of the source:

radio, Jukebox, CD

and auxiliary (AUX,

if activated on the

Cancellation of the

current operation.

Long press: return

Audio option

Selection of the

previous/next

MP3/USB/

adjustments: front/rear,

left/right balance,

loudness, sound

ambiences.

Conﬁguration menu).

Selection of

On/Off and Volume

adjustment.

Long press: CD copy to

hard disk.

wavebands FM1, to the current

FM2, FMast, AM. application.

Jukebox folder.

Selection of the display

in the screen between

modes: TRIP, TEL, NAV

and AUDIO.

Selection and conﬁrmation.

SIM card slot.

Long press on the SOS

button: emergency call.

Display the list of local

radio stations, CD tracks

or MP3/USB/Jukebox

folders.

Long press: update the

local radio stations.

Modiﬁcation of the screen

display.

Long press: reinitialisation

of the system.

TA (Trafﬁc Announcement)

Access to

"CITROËN"

services menu.

Keypad for

entering

descriptions

by successive

presses.

Automatic search for a lower/

higher frequency.

Selection of the previous/next CD,

MP3, USB or Jukebox track.

Long press: fast forward and

backward play.

Display the main menu

function on/off.

Long press: access to the PTY

(radio Programme TYpes) mode.

232

02

VOICE COMMANDS AND STEERING MOUNTED CONTROLS

1

5

1

5

3

4

2

3

2

1. Volume increase.

2. Volume decrease.

3. Mute.

1. Short press:

1. Displays the main screen.

2. Selection of the mode displayed (TRIP, TEL,

NAV or AUDIO).

3. Abandon the operation in progress

and return to the previous display.

4. Navigation through the menus.

Activation of voice recognition.

2. WHEN THE TELEPHONE IS NOT IN USE:

Long press: access to the telephone menu

(phone book, call list, ...).

4. RADIO:

selection of the previous or next stored

station.

MP3/JUKEBOX:

INCOMING CALL:

Short press to accept.

Long press to reject the call.

CALL IN PROGRESS:

5. Conﬁrmation of the function selected.

selection of the previous or next directory.

5. RADIO: automatic search for a higher

frequency.

Short press to hang up.

Long press to access the telephone menu.

CD/MP3/JUKEBOX:

3. Personalisation:

Short press: conﬁrmation of the selection

selection of the next track.

CD/MP3:

continuous press: fast forwards play.

made using the dial.

4. Rotation:

Move around the phone book, the call list.

Selection of personalisation.

233

02 VOICE COMMANDS AND STEERING MOUNTED CONTROLS

LEVEL 1

LEVEL 2

LEVEL 3

VOICE COMMANDS

radio

memory

1 to 6/*

autostore

DISPLAYING THE LIST AND USING THEM

previous/next

list

cd player

previous/next track

track number/track

scan

1 to 250/*

Jukebox (if activated)

USB

previous/next

1

repeat

To display the list of available voice

commands, press the voice recognition

control to start the voice recognition,

then say HELP or the voice recognition

command.

random play

help/what can I say/cancel

directory (CD-MP3 inserted)

list

"Pre-recorded description"

call/guide to

telephone

last number

voice box

voice mail

directory

"Pre-recorded description"

message

display

read

For the same operation, press and

hold the MENU button and select the

"Voice commands list" function.

directory

navigation

stop/resume

zoom in/out

view

*

destination

vehicle

Voice commands list

trafﬁc info

display

read

display

audio

2

telephone

trip computer

Navigation

air conditioning

Press the voice recognition control to

start the voice recognition.

Say the words one by one and wait

for the audible conﬁrmation signal

between each word.

previous/next

stop

delete

for all level 1 and 2

The list which follows is exhaustive.

yes/no

* help/what can I say/cancel

for all level 1, 2 or *

234

03 SCREEN AND MAIN MENU

> COLOUR SCREEN

This displays the following information, via the audio control panel:

time,

date,

-

°

-

ambient temperature (if there is a risk of ice, you are warned by a

message),

Telephone

-

audio source displays (radio, CD, jukebox, ...),

telematic system displays (telephone, services, ...),

check of openings (doors, boot, ...),

warning messages (e.g.: "Fuel level low") and vehicle function status

messages (e.g.: "Auto lighting activated") displayed temporarily,

trip computer information,

GPS (Europe) satellite navigation system information.

Orange

Time:

Date:

-

Screen conﬁguration: refer to the section - Screen menu map.

The system uses the complete and detailed NAVTEQ maps installed directly on the equipment's hard disk.

Updates of the maps of the UK and of the other European countries, supplied by our partner NAVTEQ, are available from the CITROËN network.

235

03 SCREEN AND MAIN MENU

For maintenance of the

screen, the use of a

soft, non-abrasive cloth

(spectacles cloth) is

TRAFFIC INFORMATION:

TMC information, messages.

recommended without any

additional product.

MAP: orientation, details,

display.

AUDIO FUNCTIONS: radio,

CD, Jukebox, options.

TELEMATIC: telephone,

directory, SMS.

NAVIGATION GUIDANCE:

GPS, stages, options.

CONFIGURATION: vehicle, display,

time, languages, voice, auxiliary

socket (AUX) parameters.

VEHICLE DIAGNOSTICS:

alert log, status of the

functions.

VIDEO: activation,

parameters.

Long press on MENU: help.

236

03 SCREEN AND MAIN MENU

DISPLAY ACCORDING TO THE

CONTEXT

IN "ZOOM/SCROLL" MODE

BLUETOOTH TELEPHONE

Press the OK dial to access short-cut

menus according to the display on the

screen.

position info

call list

1

select as destination

select as stage

store this position

exit map mode

call

1

phone book

NAVIGATION (IF NAVIGATION IS IN PROGRESS):

1

resume/stop guidance

private mode/hands-free mode

1

divert route

place call on hold/resume call

1

route type

guidance option

1

consult trafﬁc info

1

INTERNAL TELEPHONE

VEHICLE DIAGNOSTICS

zoom/scroll map

1

call list

alert log

1

dial

status of functions

1

phone book

1

voice mail

1

237

03 SCREEN AND MAIN MENU

CD (MP3 OR AUDIO)

JUKEBOX

copy CD to JBX/stop copy

activate/deactivate Introscan

activate/deactivate random play

activate/deactivate repeat

select playlist

1

activate/deactivate Introscan

activate/deactivate random play

activate/deactivate repeat

1

USB

RADIO

copy USB to JBX/stop copy

enter a frequency

1

eject USB

activate/deactivate RDS

activate/deactivate Introscan

activate/deactivate random play

activate/deactivate repeat

activate/deactivate REG mode

hide/display "Radio Text"

1

238

04 NAVIGATION - GUIDANCE

Tip: for a detailed global view of the menus available, refer to the

"Screen menu map" part of this section.

SELECTING A DESTINATION

1

2

5

Press the dial to conﬁrm the selection.

Press the MENU button.

6

Turn the dial and select the Navigation

Guidance function.

Turn the dial and select the "Enter

an address" function.

Enter an address

3

4

7

8

Press the dial to conﬁrm the selection.

When the country has been selected,

turn the dial and select the "Town"

function.

Turn the dial and select the

"Destination choice" function.

Destination choice

Town

239

04 NAVIGATION - GUIDANCE

9

12

Press the dial to conﬁrm the selection.

13

10

Repeat steps 8 to 12 for the "Road" and "N°" functions.

Turn the dial and select the letters of

the town one by one conﬁrming each

time by pressing the dial.

Select "OK" on the "Enter an address"

page.

14

Paris

OK

15

Press the dial to conﬁrm the selection.

To speed up the process, the "Post code" can be

entered instead of the name of the "Town".

Use the alphanumeric keypad to enter the letters

and digits and "*" to correct (limit of 5 characters).

Select the "Store" function to record the address entered in

a directory record and press the dial to conﬁrm the selection.

The points of interest (POI) indicate all of the service locations in

the vicinity (hotels, various businesses, airports, ...).

11

Turn the dial and select OK.

Store

POI

OK

240

04 NAVIGATION - GUIDANCE

ADDING A STAGE

Select the "Add a stage" function

(9 stages maximum) and press the dial

to conﬁrm.

1

2

3

4

5

6

During guidance, press the MENU

button.

Add a stage

Turn the dial and select the "Navigation

guidance" function.

7

Enter for example a new address.

Enter an address

8

When the new address has been

entered, select "OK" and press the dial

to conﬁrm.

Press the dial to conﬁrm the selection.

Turn the dial and select the "Journey

legs and route" function.

9

Select OK and press the dial to conﬁrm

the order of the stages.

Journey legs and route

Select "Strict" (the stage must be completed in order to continue to

the next destination) or "Proximity" then press the dial to conﬁrm.

Press the dial to conﬁrm the selection.

241

04

GUIDANCE SPEECH SYNTHESIS

The volume of the Risk Areas POI alerts can only be adjusted

during the alert using the volume adjustment control.

During announcements, the volume of each speech synthesis

function (guidance, trafﬁc information...) can be adjusted directly

using the volume adjustment control.

5

6

Press the dial to conﬁrm the selection.

1

2

Select the "Adjust speech synthesis"

Press the MENU button.

function and press the dial to conﬁrm.

Adjust speech synthesis

Turn the dial and select the "Navigation

guidance" function.

Press the dial then adjust the volume

of the speech synthesis or select the

"Deactivate" function and press the

dial to conﬁrm.

7

8

3

4

Deactivate

Press the dial to conﬁrm the selection.

Select "OK" and press the dial to

conﬁrm.

Turn the dial and select the "Guidance

options" function.

OK

Guidance options

242

04 NAVIGATION - GUIDANCE

List of POI

243

04 NAVIGATION - GUIDANCE

UPDATING POIs

DISPLAYING RISK AREAS POIs

1

The detailed procedure is available on the following website:

Press the MENU button.

"citroen.navigation.com".

Select "Map" and conﬁrm by pressing

"OK".

2

Map

3

4

5

Select "Map details" and conﬁrm by

pressing "OK".

Map details

Select "Transport and automobiles"

and conﬁrm by pressing "OK".

Transport and automobiles

Select "Risk areas" and conﬁrm by

pressing "OK".

Risk areas

244

04 NAVIGATION - GUIDANCE

The route presented depends directly on the guidance options.

Changing these options may completely change the route.

GUIDANCE OPTIONS

5

Press the MENU button.

Press the dial to conﬁrm the selection.

Turn the dial and select the "Navigation

6

2

3

4

Turn the dial and select the "Deﬁne

guidance" function.

calculation criteria" function.

Deﬁne calculation criteria

7

Press the dial to conﬁrm the selection.

8

Turn the dial and select the "Guidance

options" function.

Turn the dial and select, for example,

the "Distance/time" function.

Guidance options

Distance/time

245

04 NAVIGATION - GUIDANCE

SETTING RISK AREAS

ALERT PARAMETERS

The volume of the Risk Areas POI alerts can only be adjusted

during the alert.

1

9

Repeat steps 1 to 5 of the guidance option.

Press the dial to conﬁrm the selection.

2

Turn the dial and select the "Set

risk area parameters" function, then

press the dial to conﬁrm the warning

message. Press the dial to conﬁrm the

selection.

Turn the dial and select the "Trafﬁc

info" function if you wish to receive the

trafﬁc information announcements.

10

Trafﬁc info

Set risk area parameters

Tick this box for optimum operation of the trafﬁc information,

diversions will be suggested.

Select:

3

-

visual warnings,

audible warnings with an

announcement duration (in seconds),

warn during guidance only, then

select OK and press the dial to

conﬁrm.

11

12

-

Press the dial to conﬁrm the selection.

OK

Select "OK" and press the dial to

conﬁrm.

These functions are only available if the risk areas have been

downloaded and installed on the system.

OK

246

04 NAVIGATION - GUIDANCE

ACTIONS ON THE MAP

MAP ORIENTATION

For improved visibility, beyond the scale of 10 km, the map

automatically switches to North Orientation.

1

2

Press the MENU button.

4

Repeat steps 1 to 3 then turn the

dial and select the "Map orientation"

function.

Turn the dial and select the "Map"

function.

Map orientation

5

Press the dial to conﬁrm the selection.

3

4

Turn the dial and select the orientation

of your choice.

6

Press the dial to conﬁrm the selection.

Vehicle direction

North direction

3D view

Turn the dial and select the "Map

details" function.

Permits selection of the services

which can be seen on the map

(hotels, restaurants, risk areas...).

Select "OK" and press the dial to

conﬁrm.

7

Map details

OK

247

04 NAVIGATION - GUIDANCE

DISPLAYING THE MAP IN A WINDOW

OR IN FULL SCREEN MODE

5

Press the MENU button.

Press the dial to conﬁrm the selection.

Turn the dial and select the "Map"

function.

2

3

4

6

Turn the dial and select the "Map in

window" or "Full screen map" tab.

Map in window

Full screen map

Press the dial to conﬁrm the selection.

7

Select "OK" and press the dial to

conﬁrm

Turn the dial and select the "Display

map" function.

OK

Display map

248

05 TRAFFIC INFORMATION

The TMC (Trafﬁc Message Channel) messages provide information

relating to the trafﬁc and the weather conditions, received in real time and

communicated to the driver in the form of audible announcements and

icons on the navigation map.

CONFIGURING THE FILTERING OF

TMC ANNOUNCEMENTS

The guidance system may then suggest a diversion route.

1

2

3

4

5

6

Select the "Geographic ﬁlter" function

and press the dial to conﬁrm.

Press the MENU button.

Geographic ﬁlter

Turn the dial and select the "Trafﬁc

information" function.

7

8

Turn the dial and select the ﬁlter of

your choice.

Around the vehicle

On the route

Press the dial to conﬁrm the selection.

Select "OK" and press the dial to

conﬁrm.

Turn the dial and select the "Filter

trafﬁc information" function.

OK

Filter trafﬁc information

The ﬁlters are independent and one replaces the other.

We recommend:

-

a ﬁlter of 6 miles (10 km) around the vehicle in heavy trafﬁc,

a ﬁlter of 30 miles (50 km) around the vehicle or a ﬁlter on

the route for motorway journeys.

Press the dial to conﬁrm the selection.

249

05 TRAFFIC INFORMATION

CONFIGURING THE DISPLAY OF

TMC MESSAGES

We recommend that you do not select the "New message display" tab for

regions with heavy trafﬁc.

1

5

Press the dial to conﬁrm the selection.

Press the MENU button.

6

7

Select the "Read messages" tab.

2

3

4

Turn the dial and select the

Read messages

"Trafﬁc information" function.

The Trafﬁc Information Messages will

be read by the voice synthesiser.

Select the "New message display" tab.

The trafﬁc information messages

are extended to the ﬁlters selected

(geographic...) and can also be

displayed when guidance is not active.

Press the dial to conﬁrm the selection.

New message display

Turn the dial and select the "Conﬁgure

message announcement" function.

Select "OK" and press the dial to

conﬁrm.

8

Conﬁgure message announcement

OK

250

The external environment (hills, buildings, tunnels, basement car

parks, ...) may block reception, including in RDS mode. This is a normal

effect of the way in which radio waves are transmitted and does not

indicate any failure of the audio equipment.

06 AUDIO/VIDEO

RADIO

RDS

SELECTING A STATION

1

2

3

4

1

Press the SOURCE button several

Press the MENU button.

times in succession and select RADIO.

2

Press the BAND button to select a

waveband: FM1, FM2, FMast, AM.

Select "Audio functions" then press

"OK".

Select the "FM waveband preferences"

function then press "OK".

3

4

Brieﬂy press one of the buttons to

carry out an automatic search of the

radio stations.

FM waveband preferences

Select "Activate RDS" then press "OK".

RDS appears on the screen.

Press one of the buttons to carry out a

manual search of the radio stations.

Activate RDS

Press the LIST button to display

the list of stations received locally

(60 maximum).

To update this list, press for more than

two seconds.

RDS, if displayed, enables you to continue listening to the same station

by automatic retuning to alternative frequencies. However, in certain

conditions, coverage of an RDS station may not be assured throughout

the country as radio stations do not cover 100 % of the territory. This

explains the loss of reception of the station during a journey.

251

06

MP3 CD

INFORMATION AND ADVICE

CD

PLAYING A CD OR AN MP3 COMPILATION

Empty CDs are not recognised and may damage the system.

Insert circular compact discs only. Some anti-pirating

systems, on original discs or CDs copied using

a personal recorder, may generate malfunctions

regardless of the quality of the original player.

Insert an audio CD or an MP3 compilation in the player,

play begins automatically.

The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer

3, is an audio compression standard which permits the recording of

several tens of music ﬁles on a single disc.

In order to be able to play a recorded CDR or CDRW, when

recording, the ISO 9660 level 1.2 or Joliet ﬁle format is

recommended.

If the disc is recorded in another format, it may not be played

correctly.

It is recommended that the same recording format is always

used for an individual disc, with as low a speed as possible

(4x maximum) for optimum sound quality.

In the particular case of a multi-session CD, the Joliet format is

recommended.

1

2

If the player already contains a disc,

press the SOURCE button several

times in succession and select CD to

listen to it.

Press one of the buttons to select a

track on the CD.

Press the LIST button to display the list

of tracks on the CD or of the folders of

the MP3 compilation.

The audio system will only play ﬁles with the extension ".mp3" with

a sampling rate of 22.05 KHz or 44.1 KHz. No other type of ﬁle

(.wma, .mp4, .m3u...) can be played.

The play and display of an MP3 compilation may depend on the

disc burning software and/or the settings used. We recommend

use of the ISO 9660 ﬁle system format.

It is advisable to restrict ﬁle names to 20 characters without using

special characters (e.g. " ? ; ù) to avoid any playing or displaying

problems.

252

06 AUDIO/VIDEO

The list of compatible equipment is available from CITROËN dealers.

USING THE USB PORT*

CONNECTING A USB MEMORY STICK

1

The audio ﬁles are transmitted from a USB memory

stick to your audio system, to be listened to via the

vehicle's speakers.

1

Connect the memory stick to the port, directly or using

a lead. If the audio equipment is switched on, the USB

source is detected as soon as it is connected. Play

begins automatically after a delay which depends on

the capacity of the USB memory stick.

Do not connect a hard drive or USB equipment other

than USB memory sticks in FAT 16 or FAT 32 format

(NTFS not supported). This could damage your

installation.

The ﬁle formats recognised are .mp3 (mpeg1 layer 3 only).

2

USB memory stick (1.1, 1.2 and 2.0):

Do not connect a hard drive or USB equipment other than USB

memory sticks in FAT 16 or FAT 32 format (NTFS not supported).

This could damage your installation.

-

the USB memory sticks must be in FAT or

FAT 32 format (NTFS not supported),

navigation through the ﬁle base is by means

of the steering mounted controls.

-

* Availability according to vehicle.

253

06 AUDIO/VIDEO

JUKEBOX

PLAYING AN MP3 USB MEMORY

STICK

COPYING AN MP3 USB MEMORY STICK ONTO THE HARD DISK

1

2

1

2

3

4

5

Insert a USB memory stick in the

space provided and press the MENU

button.

Connect a USB memory stick to the port provided.

If another source is being played,

press the SOURCE button several

times in succession and select "USB"

to play it.

Select "Audio functions" and press the

dial to conﬁrm.

3

Press one of the buttons to select a

track on the USB memory stick.

Press the LIST button to display the

list of folders on the MP3 USB memory

stick.

Select "USB" and press the dial to

conﬁrm.

USB

Select "Copy USB to jukebox" and

press the dial to conﬁrm.

To eject the USB memory stick, use the short-cut menu (press OK)

or press the MENU button, select "Audio functions", "USB", then

select "Eject USB".

The play and display of an MP3 compilation may depend on the ﬁle

format used.

Copy USB to jukebox

Select "Complete disc" to copy the

entire USB memory stick and press the

dial to conﬁrm.

In order to be read, the USB memory stick must be formatted

FAT 16 or 32. The player only reads USB memory sticks.

Complete disc

254

06

COPYING A CD ONTO THE HARD DISK

The "Auto creation" tab automatically copies the CD by default into

an album of the type "album n°...".

1

2

3

4

5

Insert an audio CD or an MP3

compilation and press the MENU

button.

Select the letters one by one and

select "OK" to conﬁrm.

Select "Audio functions" then select

CD and press the dial to conﬁrm.

6

OK

Audio functions

The audio or MP3 CD is copied onto the hard disk. Copying

may take up to 20 minutes depending on the length the CD.

While copying is in progress, it is not possible to listen to albums

previously copied to the hard disk or to CDs.

Select "Copy CD to jukebox" and press

the dial to conﬁrm.

If it is not an MP3 CD, the Jukebox automatically compresses the

CD in MP3 format. The compression may take approximately

20 minutes depending on the length the CD. During this

compression phase, it is possible to listen to the CD or to albums

previously copied to the hard disk.

Copy CD to jukebox

Select "Complete CD" to copy the

entire CD and press the dial to conﬁrm.

Complete CD

A long press on the SOURCE button starts copying of the CD.

To stop the copy, repeat points 2 and 3.

Select "Stop copy" and press the dial to

conﬁrm.

It is not possible to copy ﬁles from the Jukebox to a CD.

The "Stop the CD copy" action does not delete the ﬁles which have

already been transferred onto the jukebox hard disk.

Stop copy

255

06 AUDIO/VIDEO

LISTENING TO THE JUKEBOX

RENAMING AN ALBUM

1

Press the SOURCE button several

times in succession and select the

"Jukebox" function.

Press the MENU button.

Jukebox

2

3

2

3

4

Select "Audio functions" and press the

dial to conﬁrm.

Press the LIST button.

Select the "Jukebox" function and

press the dial to conﬁrm.

Turn the dial to select the ﬁles.

Jukebox

Select the "Jukebox management"

function and press the dial to conﬁrm.

Press the ESC button to return to the ﬁrst ﬁle level.

Jukebox management

256

06 AUDIO/VIDEO

5

8

Select "OK" and press the dial to

conﬁrm.

Select the album to be renamed and

press the dial to conﬁrm.

OK

6

7

Select the "Rename" tab and press the

dial to conﬁrm.

Rename

To rename the tracks of an album, follow the same procedure,

selecting the tracks to be renamed.

Use the ESC button to exit from the list of tracks.

Turn the dial and select the letters of

the album title one by one conﬁrming

each time by pressing the dial.

Select the "Delete" function to delete an album or a

track from the Jukebox.

Use the alphanumeric keypad to enter the letters of the album title

one by one.

Delete

257

06 AUDIO/VIDEO

USING THE AUXILIARY INPUT (AUX)

AUDIO (JACK/RCA) CABLE NOT SUPPLIED

Press the MENU button then select the "Conﬁguration" function,

then "Sounds", then "Activate auxiliary source" to activate the

NaviDrive audio/telephone auxiliary input.

1

2

Connect the portable device

(MP3 player…) to the audio

sockets (white and red, RCA

type) located in the glovebox

using a suitable audio cable

(JACK or RCA).

Press the SOURCE button several

times in succession and select AUX.

Display and control is on the portable device.

It is not possible to copy the ﬁles onto the hard disk via the auxiliary

input.

258

06 AUDIO/VIDEO

You can connect video equipment (camcorder, digital camera, DVD player...)

to the three audio/video sockets, located in the glove box.

VIDEO MENU

Turn the dial and select the "Video

parameters" function to set the display

format, the brightness, the contrast

and the colours.

1

2

3

4

5

6

After connecting the video equipment,

press the MENU button.

Turn the dial and select the "Video"

function.

Video parameters

7

Press the dial to conﬁrm the selection.

Turn the dial and select the "Activate

video mode" function to activate/

deactivate the video.

Pressing the DARK button disconnects display of the video.

Activate video mode

Pressing the SOURCE button several times in succession permits

the selection of an audio source other than that of the video.

Press the dial to conﬁrm the selection.

Videos can only be displayed when stationary.

259

07

INTERNAL TELEPHONE

INSTALLING YOUR SIM CARD

ENTERING THE PIN CODE

(NOT SUPPLIED)

1

Enter the PIN code on the keypad.

Open the holder by pressing the button

using the tip of a pen.

PIN code

2

Install the SIM card

in the holder and

then insert it in the

slot.

Conﬁrm the PIN code by pressing the

# button.

3

To remove the SIM card, repeat step 1.

When entering your PIN code, tick the "Store PIN" tab to gain

access to the telephone without having to enter this code when it is

used subsequently.

Your SIM card must be installed and removed with the NaviDrive

audio and telematics system switched off and the ignition off.

260

07 BLUETOOTH TELEPHONE

The services offered by the telephone depend on the network, the SIM

card and the compatibility of the Bluetooth equipment used. Refer to your

telephone's manual and your operator to check which services you have

access to. A list of mobile telephones which offer the best range of services

is available from dealers.

CONNECTING A BLUETOOTH

TELEPHONE

3

For reasons of safety, the driver should only carry out operations

which require prolonged attention when the vehicle is stationary

(pairing the Bluetooth mobile telephone to the hands-free kit).

Select "Bluetooth activation mode",

then "Activated and visible". Press the

dial to conﬁrm each operation.

1

To ﬁnd and change the name of the CITROËN audio/telephone,

repeat step 2 then select "Change the name of the audio/

telephone".

Activate the telephone's Bluetooth function.

The last telephone connected is reconnected

automatically.

2

4

Press the MENU button, select

"Telematics", then "Bluetooth

functions". Press the dial to conﬁrm

each operation.

On your telephone, select the name of

the CITROËN audio/telephone. Enter the

authentication code (0000 by default).

261

07 BLUETOOTH TELEPHONE

CONNECTING A BLUETOOTH

TELEPHONE

Once the telephone has been connected, the system can

synchronise the address book and the call list. Repeat step 2

then select "Phone book synchronisation mode". Select the

synchronisation of your choice and press the dial to conﬁrm.

To change the authentication code, repeat step 2 then select

"Authentication code" and save the code of your choice.

The synchronisation may take a few minutes.

To change the telephone connected, repeat step 2 then select "List

of matched peripheral equipment" and press OK to conﬁrm. The

list of previously connected telephones (10 maximum) appears.

Select the telephone of your choice, conﬁrm, then select "Connect"

and press the dial to conﬁrm.

The call list consists of calls made from the vehicle's telephone only.

262

To select the telephone used, press MENU, then select "Telematics", then

"Bluetooth functions", then "Bluetooth activation mode". Then select:

07 USING THE TELEPHONE

-

"Deactivated": to use the internal telephone,

"Activated and visible": to use the Bluetooth telephone, visible to all

telephones,

-

"Activated and not visible": to use the Bluetooth telephone, not visible

to other telephones, it is not possible to match a new telephone.

CALLING A CONTACT

1

5

6

Press the PICK UP button to display

the telephone short-cut menu.

Press the PICK UP button to call the

number dialled.

Press the HANG UP button to end the

call.

Select "Call list" or "Phone book" and press "OK". Select the

number required and conﬁrm to make the call.

ACCEPTING OR REJECTING A CALL

Turn the dial and select the "Dial"

function.

2

3

4

Dial

Press the PICK UP button to accept

a call.

Press the dial to conﬁrm the selection.

Press the HANG UP button to reject

a call.

Dial the telephone number of your

contact using the alphanumeric

keypad.

Press the end of the steering wheel stalk for more

than 2 seconds to access the telephone menu: calls

log, directory, voice mailbox.

263

08 CONFIGURATION

The "Conﬁguration" function gives access to the colour, brightness and

units settings and to voice commands.

SETTING THE DATE AND TIME

This adjustment must be carried out whenever the battery has

been disconnected.

5

Press the dial to conﬁrm the selection.

1

2

Press the MENU button.

6

7

8

Turn the dial and select the "Set date

and time" function.

Turn the dial and select the

"Conﬁguration" function.

Set date and time

Press the dial to conﬁrm the selection.

3

4

Press the dial to conﬁrm the selection.

Adjust the settings one by one

conﬁrming by pressing the dial. Next

select the "OK" tab on the screen then

conﬁrm.

Turn the dial and select the "Display

conﬁguration" function.

Display conﬁguration

OK

264

09

SCREEN MENU MAP

previous destinations

around current place

4

5

order/delete journey legs

3

divert route

3

MAIN FUNCTION

1

chosen destination

OPTION A

option A1

option A2

OPTION B...

2

GUIDANCE OPTIONS

deﬁne calculation criteria

fastest

NAVIGATION - GUIDANCE

2

1

3

SELECT DESTINATION

enter an address

2

4

3

2

shortest

country:

4

distance/time

search by name

town:

5

4

with tolls

road:

GPS coordinates

directory

4

3

with ferry

N°/_:

4

trafﬁc info

curr. loc

previous destinations

4

store

set speech synthesis

activate/deactivate road names

delete last destinations

JOURNEY LEGS AND ROUTE

add a stage

4

3

2

POI

4

3

near

enter an address

directory

5

4

on the route

STOP/RESUME GUIDANCE

5

2

265

09

SCREEN MENU MAP

supermarkets, shopping

stations, bus stations

vehicle rental

4

culture, tourism and shows

culture and museums

casinos and nightlife

cinemas and theatres

tourism

MAP

3

1

lay-bys, car parks

service stations, garages

MAP ORIENTATION

vehicle direction

north direction

4

2

3

DISPLAY MAP

2

full screen map

3

3D view

map in window

shows and exhibitions

sports and open air centres

sports centres

MAP DETAILS

2

MOVE THE MAP/FOLLOW VEHICLE

MAP DATABASE DESCRIPTION

2

administration and safety

town halls, town centre

3

4

golf courses

universities, colleges

hospitals

4

skating rinks, bowling alleys

winter sports resorts

parks, gardens

TRAFFIC INFORMATION

4

1

hotels, restaurants and shops

hotels

READ MESSAGES

3

2

FILTER TRAFFIC INFORMATION

geographic ﬁlter

4

theme parks

restaurants

4

3

transport and automobile

airports, ports

store all messages

store messages

vineyards

3

business centres

4

266

09

SCREEN MENU MAP

SELECT TMC STATION

CD

2

around the vehicle

4

automatic TMC

manual TMC

copy CD to Jukebox

3

on the route

copy complete CD

multiple selection

current album

current track

4

road information

trafﬁc information

road closure

3

list of TMC stations

4

AUDIO FUNCTIONS

size limit

1

eject CD

3

RADIO FAVOURITES

enter a frequency

road condition

weather and visibility

urban/city information

parking

2

USB

2

3

copy USB to Jukebox

complete disc

3

activate/deactivate RDS mode

activate/deactivate regional mode

display/hide radio text

3

4

multiple selection

current album

current track

eject USB

4

public transport

demonstrations

4

CD, USB, JUKEBOX FAVOURITES

activate/deactivate Introscan (SCN)

activate/deactivate Random mode (RDM)

activate/deactivate Repeat (RPT)

activate/deactivate display of CD info

2

CONFIGURE MESSAGE ANNOUNCEMENT

read messages

3

2

3

JUKEBOX

2

new message display

jukebox management

3

267

09

SCREEN MENU MAP

jukebox conﬁguration

CITROËN assistance

CITROËN service

messages received

send one record

3

4

5

hi-ﬁ (320 kbps)

receive by infrared

4

high (192 kbps)

exchange with SIM card

send all records to SIM

send one record to SIM

receive all SIM ﬁles

receive a SIM ﬁle

4

directory

mailbox

3

2

exchange by infrared

send all records

4

3

services

customer contact centre

network search mode

5

4

268

09

SCREEN MENU MAP

automatic mode

text message ring

5

6

manual mode

calls diversion to mailbox n°

delete calls log

CONFIGURATION

3

1

networks available

length of calls

reset

4

DISPLAY CONFIGURATION

choose colour

2

BLUETOOTH FUNCTIONS

activation mode

3

2

3

adjust luminosity

3

manage PIN code

activate/deactivate

save PIN code

modify PIN code

call options

deactivated

set date and time

3

4

activated and visible

select units

4

activated and not visible

SOUND

4

2

list of matched peripheral equipment

change the name of the audio/telephone

authentication code

voice commands setting

speech synthesis setting

guidance instructions volume

3

conﬁgure calls

display my number

4

phone book synchronisation mode

no synchronisation

other message volume

5

4

automatic reply after x ring(s)

ring options

select female/male voice

5

4

view telephone phone book

view SIM card phone book

view all phone books

activate/deactivate auxiliary source

4

3

for voice calls

SELECT LANGUAGE

5

2

DEFINE VEHICLE PARAMETERS*

for text messages (SMS)

* The parameters vary according to vehicle.

269

09

SCREEN MENU MAP

Press the MENU button for more

Press the Music button several times

in succession to access the following

settings.

than 2 seconds to access the

following ﬂow chart.

VIDEO

1

MUSICAL AMBIENCE

VOICE COMMANDS LIST

1

ACTIVATE VIDEO MODE

VIDEO PARAMETERS

display formats

2

BASS

AUDIO/TELEPHONE

DIAGNOSTICS

GPS COVERAGE

2

3

TREBLE

2

adjust luminosity

set colours

UNIT BACKUP POWER

UNIT DESCRIPTION

2

LOUDNESS CORRECTION

FR - RR BALANCE

LH - RH BALANCE

set contrasts

NAVIGATION

DEMONSTRATION

1

VEHICLE DIAGNOSTICS

SERVICES

CONFIGURATION

1

ALERT LOG

AUTO VOLUME CORRECTION

2

STATUS OF FUNCTIONS*

RESET TYRE PRESS. DETEC. SYS.*

Each audio source (Radio, CD, MP3,

Jukebox) has its own separate settings.

* The parameters vary according to the vehicle.

270

Display short cuts version 8.2

FREQUENTLY ASKED QUESTIONS

The table below groups together the answers to the most frequently asked questions.

QUESTION

ANSWER

SOLUTION

There is a difference in

sound quality between

the different audio

For optimum sound quality, the audio settings (Volume, Bass, Treble,

Ambience, Loudness) can be adapted to the different sound sources,

which may result in audible differences when changing source (radio,

CD...).

Check that the audio settings (Volume, Bass,

Treble, Ambience, Loudness) are adapted to

the sources listened to. It is advisable to set

the AUDIO functions (Bass, Treble, Front-Rear

Balance, Left-Right Balance) to the middle

position, select the musical ambience "None" and

set the loudness correction to the "Active" position

in CD mode or to the "Inactive" position in radio

mode.

sources (radio, CD...).

The CD is ejected

automatically or is not

played by the player.

The CD is inserted upside down, is unplayable, does not contain any

audio data or contains an audio format which the player cannot play.

The CD is protected by an anti-pirating protection

system which is not recognised by the audio

equipment.

-

Check that the CD is inserted in the player the

right way up.

Check the condition of the CD: the CD cannot

be played if it is too damaged.

Check the content in the case of a recorded

CD: consult the advice in the Audio section.

The audio equipment's CD player does not

play DVDs.

Due to inadequate quality, certain recorded

CDs will not be played by the audio system.

The CD player sound is

poor.

The CD used is scratched or of poor quality.

Insert good quality CDs and store them in suitable

conditions.

The audio equipment settings (bass, treble, ambiences) are unsuitable.

Set the treble or bass level to 0, without selecting

an ambience.

271

QUESTION

ANSWER

An incorrect waveband is selected.

SOLUTION

The stored stations do

not function (no sound,

87.5 Mhz is displayed...)

Press the BAND AST button to return to the

waveband (AM, FM1, FM2, FMAST) on which the

stations are stored.

The quality of reception

of the radio station

listened to gradually

deteriorates or the stored

stations do not function

(no sound, 87.5 Mhz is

displayed...).

The vehicle is too far from the transmitter used by the station listened

to or there is no transmitter in the geographical area through which the

vehicle is travelling.

Activate the RDS function to enable the system

to check whether there is a more powerful

transmitter in the geographical area.

The environment (hills, buildings, tunnels, basement car parks...) block

reception, including in RDS mode.

This phenomenon is normal and does not indicate

a failure of the audio equipment.

The aerial is absent or has been damaged (for example when going

through a car wash or into an underground car park).

Have the aerial checked by a CITROËN dealer.

Sound cut-outs of 1 to

During this brief sound cut-out, the RDS searches for any frequency

Deactivate the RDS function if the phenomenon is

too frequent and always on the same route.

2 seconds in radio mode. permitting better reception of the station.

With the engine off,

the audio equipment

switches off after a few

minutes of use.

When the engine is switched off, the audio equipment operating time

Start the vehicle's engine to increase the battery

charge.

depends on the battery charge.

The switch-off is normal: the audio equipment switches to economy mode

and switches off to prevent discharging of the vehicle's battery.

TRAFFIC INFO is

On starting, it is several minutes before the system begins to receive the

Wait until the trafﬁc information is being received

correctly (displaying of the trafﬁc information

symbols on the map).

selected. However,

certain trafﬁc jams

along the route are not

indicated in real time.

trafﬁc information.

In certain countries, only major routes (motorways, ...) are listed for the

trafﬁc information.

This phenomenon is normal. The system is

dependent on the trafﬁc information available.

The time taken to

calculate a route

The performance of the system may slow down temporarily if a CD is

being copied onto the Jukebox at the same time as a route is being

Wait until the CD has been copied or stop the

copying before starting the guidance function.

sometimes seems longer calculated.

than usual.

272

Audio and Telematics -> NaviDrive for Your Citroen C4 Picasso SUV First Generation (2006-2013)

Related Topics

Audio and Telematics

Popular Owner Manuals

Latest Owner Manuals