Advertisement

Advertisement

XI - Practical Information -> Changing a bulb for Your Citroen C4 Picasso SUV First Generation (2006-2013)

P R A C T I C A L I N F O R M AT I O N  
CHANGING A BULB  
Front lamps  
Model with halogen headlamps  
Model with Xenon headlamps  
and directional headlamps  
The headlamps are tted  
with polycarbonate glass  
with a protective coating:  
) do not clean them using a dry  
or abrasive cloth, nor with a  
detergent or solvent product,  
) use a sponge and soapy water,  
) when using a high pressure  
washer on persistent marks, do  
not keep the lance directed to-  
wards the lamps or their edges  
for too long, so as not to dam-  
age their protective coating and  
seals.  
) Do not touch the bulb directly  
with your ngers, use lint-free  
cloths.  
Changing a bulb should only be  
done after the headlamp has been  
switched off for a few minutes (risk  
of serious burns).  
It is imperative to use only anti-ul-  
traviolet (UV) type bulbs in order  
not to damage the headlamp.  
Always replace a failed bulb with a  
new bulb with the same type and  
specication.  
1. Dipped beam headlamps  
(H7-55 W)  
2. Main beam headlamps  
(H1-55 W)  
3. Sidelamps (H6W-6 W)  
Daytime running lamps/  
sidelamps (LEDs)  
4. Direction indicators  
(H21-21 W)  
1. Dual-function Xenon  
headlamps (dipped/main  
beam)  
2. Additional main beams  
(H7-55W)  
3. Sidelamps (H6W-6W)  
Daytime running lamps/  
sidelamps (LEDs)  
4. Direction indicators (H21-21W)  
XI  
190  
 
P R A C T I C A L I N F O R M AT I O N  
Dual-function Xenon headlamps  
(dipped/main beam)  
Dipped beam headlamps  
Main beam headlamps  
If the headlamp bears this  
symbol, any operation to  
change the Xenon dual-  
function directional head-  
lamp (D1S-35 W) must be carried  
out by professionals (risk of elec-  
trocution).  
Contact a CITROËN dealer or a  
qualied workshop.  
It is recommended to change both  
bulbs at the same time if one of  
them is faulty.  
) Remove the rubber cover.  
) Remove the rubber cover.  
) Detach the clips by lowering  
them on each side of the bulb.  
) Pull on the bulb-holder to remove it.  
) Replace the faulty bulb.  
) Push the bulb-holder back into  
its housing.  
) Reattach the clips.  
) Ret the rubber cover.  
Additional main beam headlamps  
) Remove the rubber cover.  
) Rotate the bulb-holder a quarter  
turn anti-clockwise and remove it  
from its housing.  
) Rotate the bulb-holder a quarter  
turn anti-clockwise and remove it  
from its housing.  
) Replace the faulty bulb.  
) Reposition the bulb-holder by  
pushing it in, tightening it by a  
quarter turn clockwise.  
) Replace the faulty bulb.  
) Reposition the bulb-holder by  
pushing it in, tightening it by a  
quarter turn clockwise.  
) Ret the rubber cover.  
) Ret the rubber cover.  
XI  
191  
 
P R A C T I C A L I N F O R M AT I O N  
Sidelamps  
Direction indicators  
Integrated direction indicator  
side repeaters  
The direction indicator bulb is locat-  
ed underneath the main beam bulb.  
) Remove the rubber cover.  
) Pull on the bulb-holder to remove it.  
) Replace the faulty bulb.  
) Reposition the bulb-holder in the  
bracket and push it in.  
) Ret the rubber cover.  
) Rotate the bulb-holder a quarter  
turn anti-clockwise.  
) Remove it from its housing.  
) Replace the faulty bulb.  
) Reposition the bulb-holder.  
To change the repeater, press down-  
wards rmly on the zone indicated  
by the arrow, then pull the repeater.  
Repeaters can be obtained from  
a CITROËN dealer or a qualied  
workshop.  
) Rotate it a quarter turn clockwise  
to reposition in its housing.  
XI  
192  
 
P R A C T I C A L I N F O R M AT I O N  
Changing daytime running  
lamps/sidelamps (LEDs)  
Front foglamps (H11-55 W)  
Rear foglamp (P21 W)  
For the replacement of this type  
of LED lamp, contact a CITROËN  
dealer or a qualied workshop.  
)
Insert the key in the notch A, tilting  
the bulb-holder cover, located un-  
derneath the bumper, then insert  
the key in the notch B to remove it.  
) Pass your hand underneath the  
bumper to reach the bulb-holder.  
) Rotate the bulb-holder a quarter  
turn.  
) Pull on the bulb-holder.  
) Rotate the bulb a quarter turn to  
remove it.  
) Undo the lamp.  
) Tilt the bulb-holder.  
) Change the faulty bulb.  
) Reposition the bulb-holder.  
) Do up the lamp and ret the bulb-  
holder cover rmly in place.  
) Replace the faulty bulb.  
) Fit the bulb.  
) Reposition the bulb-holder by  
rotating it a quarter turn.  
XI  
193  
 
P R A C T I C A L I N F O R M AT I O N  
Lamps mounted on the  
bodywork  
) Ret the lamp unit on the body  
and do up the two screws.  
Rear lamps (C4 Picasso)  
) Reposition the plastic cover by  
pressing on it.  
Lamps mounted on the tailgate  
1. Direction indicators  
(PY21W)  
2. Brake lamps/sidelamps  
(P21/5W)  
3. Reversing lamp (P21W)  
) Identify the faulty bulb.  
) With the boot open, press on the  
plastic cover A, located close to  
the lamp unit, to release it from  
its housing.  
) Undo the two screws B on the  
side of the lamp unit and detach  
the lamp unit by pulling it rear-  
wards.  
) Disconnect the connector linking  
the lamp unit with the tailgate.  
) Identify the faulty bulb.  
) With the boot open, remove the  
plastic cover on the tailgate.  
) Remove the bulb-holder from its  
housing.  
) Replace the bulb.  
) Remove the bulb-holder.  
) Replace the bulbs.  
To remove a bulb, rotate it a  
quarter turn.  
To ret the bulb, rotate it a quar-  
XI  
To remove a bulb, rotate it a  
quarter turn.  
To ret the bulb, rotate it a quar-  
ter turn in the other direction.  
ter turn in the other direction.  
) Reposition the bulb-holder.  
) Ret the plastic cover.  
) Reposition the bulb-holder.  
) Reconnect the connector to the  
lamp unit.  
194  
 
P R A C T I C A L I N F O R M AT I O N  
Changing bulbs  
) Identify the faulty bulb.  
Number plate lamps  
(W 5 W)  
Rear lamps (Grand C4 Picasso)  
) With the tailgate open, undo the  
3 screws located on the side of  
the lamp unit and pull it rear-  
wards to detach.  
) Disconnect the connector linking  
the lamp unit to the boot. Do not  
disconnect the LEDs.  
) Remove the seal.  
) Remove the bulb-holder.  
) Replace the bulbs.  
To remove a bulb, rotate it a  
quarter turn.  
To t the bulb, rotate it a quarter  
turn in the other direction.  
1. Direction indicators (PY21W)  
2. Brake lamps (P21W)  
3. Reversing lamp (P21W)  
4. Sidelamps (LEDs)  
) Insert a thin screwdriver into one  
of the external holes of the lens.  
) Push it outwards to unclip it.  
) Remove the lens.  
) Change the faulty bulb.  
) Reposition the bulb-holder.  
) Ret the seal.  
) Reconnect the connector to the  
lamp unit.  
) Arrange the harness in the open-  
ing provided in the body.  
For this type of lamp, contact a  
CITROËN dealer or qualied  
workshop.  
) Ret the lamp unit to the body  
and t and tighten the 3 screws.  
XI  
195  
 
P R A C T I C A L I N F O R M AT I O N  
Third brake lamp with bulb  
(W5W)  
Boot lamps (W5W)  
Interior lighting  
) With the boot open, detach the  
interior trim.  
) Undo the nuts.  
) Using a thin screwdriver, detach  
the 3 retaining lugs.  
) Remove the lamp via the exterior  
of the tailgate.  
) Remove the bulb-holder.  
) Change the faulty bulb(s).  
To ret, carry out these operations in  
reverse order.  
Interior lamp (1/W5W)  
Detach the unit by pushing it rear-  
wards.  
Detach the cover of the interior  
lamp 1 with a thin screwdriver, close  
to the button, to access the faulty  
bulb.  
Third brake lamp (LEDs)  
Torch (Krypton 3.6 V)  
Map reading lamps (2/W5W)  
Detach the cover of the interior lamp.  
To access the faulty bulb, detach  
the partition for the reading lamp 2  
concerned, as necessary.  
) Open the tab.  
XI  
) Push with a at screwdriver in  
the hole under the tab and re-  
cover the bulb unit.  
) Open the bulb unit fully to change  
the bulb.  
For the replacement of this type  
of LED lamp, contact a CITROËN  
dealer or a qualied workshop.  
196