P R A C T I C A L I N F O R M AT I O N
Fuses under the dashboard
CHANGING A FUSE
Changing a fuse
) Use the special tweezer A to ex-
tract the fuse from its housing
and check the condition of its el-
ement.
) Replace the failed fuse with a
fuse of the same rating (same
colour)
Before replacing a fuse:
-
-
-
the cause of the failure must be
identified and corrected,
all electrical consumers must be
switched off,
your vehicle must be stationary,
ignition off.
Use of a fuse of different rating
may cause a malfunction (risk of
fire).
Identify the failed fuse by reference
to the tables and diagrams below.
Your vehicle's electrical
system is designed to oper-
ate with either standard or
optional equipment.
If the failure occurs again soon after
replacing the fuse, have the electri-
cal system checked by a CITROËN
dealer or a qualified workshop.
Before installing electrical equip-
ment or accessories on your vehi-
cle, consult a CITROËN dealer or a
qualified workshop.
Good
Failed
CITROËN declines all responsibil-
ity for the consequences and costs
that are caused by faults or repairs
on your vehicle resulting from the
installation of accessories that
are not supplied and/or not rec-
ommended by CITROËN and not
installed according to its instruc-
tions, particularly when the energy
consumption of all of the additional
accessories connected exceeds
10 milliamperes (Ma).
Access to tools
Tweezer A
The extraction tweezer A is fitted on
the back of the dashboard fusebox
cover.
For access to it:
) unclip the cover by pulling at the
XI
top right, then left,
) pull the cover down,
) remove the tweezer.
197
English 