P R A C T I C A L I N F O R M AT I O N
TOWING THE VEHICLE
Towing your vehicle
Towing another vehicle
Procedure for having your vehicle
towed or for towing another vehicle
using a removable towing eye.
Access to the tools
) On the front bumper, unclip the
cover by pressing at the top left
and pulling at the right.
) On the rear bumper, unclip the
cover by pressing at the bottom
at pulling at the top.
) Screw the towing eye in fully.
) Install the towing bar.
) Switch on the hazard warning
) Screw the towing eye in fully.
) Install the towing bar.
) Switch on the hazard warning
lamps on the towed vehicle.
lamps on the towed vehicle.
) Place the gear lever in neutral
(position N on the electronic
gearbox or automatic gearbox).
According to equipment, the towing
eye is installed in the storage flap
under the second row passenger
footwell or under the boot floor.
To gain access to it:
) open one of the rear doors or the
boot (according to equipment),
) open the flap or raise the floor
XI
(according to equipment),
) remove the towing eye from the
holder.
Failure to observe this instruction
could result in damage to certain
braking components and the ab-
sence of braking assistance the
next time the engine is started.
207
English 