I
C R U I S E C O N T R O L
A
4
3
1
Accelerate to the desired speed,
then press button 2 or button
4. The cruise speed will then
be memorised and displayed in
zone A on the instrument panel.
Note: you can use successive
presses to modify the cruise
speed in steps of 1 km/h and a
continuous press to jump in steps
of 5 km/h.
2
This driving assistance function
allows you to drive at the speed
of your choce without the need to
action the accelerator. It is avail-
able at speeds above 40 km/h
(25 mph), in the higher gears only.
To exceed the cruise speed
temporarily
While cruise control is in use, it is
always possible to go above the
cruise speed simply by pressing
the accelerator pedal (for exam-
ple to overtake another vehicle).
The speed displayed in zone A
flashes.
You have only to release the acce-
lator pedal to return to your cruise
speed.
Control A for cruise control is
located below the lighting/signal-
ling stalk.
Note: Information relating to the
cruise control is displayed in
zone A of the instrument panel.
You can then release the accel-
erator pedal. The vehicle will
automatically keep to that chosen
speed.
To select the function
Turn control 1 to position “REG”.
Note: The vehicle speed may vary
slightly from that memorised.
Note: if during cruise control the
system cannot keep to the cruise
speed (e.g. on a steep descent),
then the speed flashes. If neces-
sary, brake to curb your speed.
To select a cruising speed
Adjustment of the memorised
speed while cruise control is in
operation
To adjust the memorised speed,
displayed in zone A, press on:
At the time you select the func-
tion via the control 1, there is no
cruise speed previously memo-
rised:
- button 4 to increase the speed,
- button 2 to decrease the speed.
30
English 