I
S C R E E N W I P E
B - Rear screen wiper
Changing the wiper blades
The wipers should be stopped in
the maintenance position (dur-
ing replacement).
To deactivate
For this, switch off the ignition
then, within one minute, action the
wiper stalk. The wipers will posi-
tion themselves to the centre of
the windscreen.
B
Intermittent rear wipe.
After replacement, the wipers
resume their normal position once
the ignition has been switched on
and there is an action on the wiper
stalk.
A
Timed rear screen wash /
wipe.
A - Windscreen washer
To operate the windscreen wash,
pull the wiper stalk towards you.
Screen wash is accompanied by
a timed screen wipe, the head-
lamp wash also operates if dipped
beams are switched on.
Automatic operation
This function is active when the
windscreen wipers are operating
and you engage reverse gear.
Activation / deactivation of this
function is possible in the menu
“Personalisation - Configuration”
of the “Main menu”.
51/54
Deactivation may be necessary
when a bicycle-carrier is installed
on the tailgate.
Always check that the windscreen and rear screen wipers can
operate freely, for example if fitting a bicycle carrier,
or in freezing temperatures.
Remove any accumulation of snow from
the base of the windscreen.
18
English 