I
W I N D O W S
Anti-pinch device
An anti-pinch device stops the window from rising. If it meets an obstacle,
it goes back down.
After a battery disconnection or in the event of a malfunction, you
have to re-initialise the anti-pinch function:
- Lower the window fully using the control, then close. It will rise only a few
centimetres.
- Press repeatedly on the control until the window is fully closed.
Warning: During this operation, the anti-pinch protection does not work.
Child safety
Electric operation
The driver uses the controls
located on the door to operate the
vehicle’s electric windows.
This prevents the rear windows from being operated, and the rear
doors from being opened, from the rear seat positions.
It is activated by means of a press on control A located on the
electric windows control panel. The warning lamp in the instrument
panel lights up for approx. 10 seconds.
Each time the ignition is switched on, the warning lamp comes on for
approx. 10 seconds.
Opening of the doors from the outside and operation of the rear electric
windows remain possible from the front of the vehicle.
Note: the electric windows can
also be operated for a limited
time after the ignition has been
switched off (including after the
front doors have been opened).
Sequential control
An action on the control to the first
notch causes a window move-
ment which stops as soon as the
control is released. An action on
the control to the second notch
causes the window to close or
open fully, a further press on the
control stops the movement.
ALWAYS PAY ATTENTION TO WHERE CHILDREN ARE WHEN
OPENING OR CLOSING WINDOWS.
- Always remove the ignition key when leaving the vehicle, even for short
periods.
- If the driver is operating the passenger’s electric window control, the driver
should ensure that no passenger is obstructing the window from closing.
- The driver should check that the electric windows are used properly by the
passengers.
- Should there be any risk of a person becoming trapped by a window clos-
ing, you should immediately reverse the window movement. To do this,
reverse the position of the control concerned.
26
English 