Get Access -> Alarm Guide for Citroen C4 SUV Second Generation (2010-2018)

Access

Alarm*

System which protects and provides a deterrent against theft and break-ins. It provides the

following types of monitoring:

2

-

exterior perimeter

Self-protection function

The system checks for the putting out of

service of its components.

The alarm is triggered if the battery, the central

control or the siren wiring are put out of service

or damaged.

For all work on the alarm system,

contact a CITROËN dealer or a

qualified workshop.

The system checks for opening of the vehicle.

The alarm is triggered if anyone tries to open a

door, the boot, the bonnet...

-

interior volumetric

The system checks for any variation in the

volume in the passenger compartment.

The alarm is triggered if anyone breaks a

window, enters the passenger compartment or

moves inside the vehicle.

-

tilt

The system checks for any change in the

attitude of the vehicle.

The alarm is triggered if the vehicle is lifted,

moved or knocked.

* Depending on the country of sale.

71

Access

Locking the vehicle with full

alarm system

Following an instruction to lock the vehicle,

the exterior perimeter monitoring is activated

after a delay of 5 seconds and the interior

volumetric and anti-tilt monitoring after a delay

of 45 seconds.

Deactivation

F

Press the unlocking button on the remote

control.

or

F

Unlock the vehicle with the "Keyless Entry

and Starting" system.

The monitoring system is deactivated: the

indicator lamp in the button goes off and the

direction indicators flash for about 2 seconds.

If an opening (door, boot...) is not closed

fully, the vehicle is not locked but the

exterior perimeter monitoring will be

activated after a delay of 45 seconds at

the same time as the interior volumetric

and anti-tilt monitoring.

Activation

When the vehicle automatically locks

itself again (as happens if a door or

boot is not opened within 30 seconds of

unlocking), the monitoring system is not

reactivated automatically. To reactivate

the system, it is necessary to unlock

the vehicle and then lock it again using

the remote control or the "Keyless Entry

and Starting" system.

F

Switch off the ignition and get out of the vehicle.

Lock the vehicle with the remote control.

or

F

Lock the vehicle with the "Keyless Entry

and Starting" system.

The monitoring system is active: the indicator

lamp in the button flashes once per second

and the direction indicators come on for about

2 seconds.

72

Access

2

Locking the vehicle

with exterior perimeter

monitoring only

Deactivate the interior volumetric and anti-tilt

monitoring to avoid unwanted triggering of the

alarm in certain cases such as:

To be effective, this deactivation must

be carried out each time the ignition is

switched off.

-

leaving a pet in the vehicle,

leaving a window partially open,

washing your vehicle,

changing a wheel,

having your vehicle towed,

transport by sea.

Deactivating the interior

Reactivating the interior

volumetric and anti-tilt monitoring volumetric and anti-tilt monitoring

F

Switch off the ignition and within

ten seconds, press the button until the

indicator lamp is on continuously.

Get out of the vehicle.

Immediately lock the vehicle using the

remote control or the Keyless Entry and

Starting system.

F

Deactivate the perimeter monitoring by

unlocking the vehicle with the remote

control or the Keyless Entry and Starting

system.

The indicator lamp in the button goes off.

Reactivate all monitoring by locking the

vehicle with the remote control or the

Keyless Entry and Starting system.

The indicator lamp in the button flashes

once per second again.

F

The exterior perimeter monitoring alone is

activated: the indicator lamp in the button

flashes once per second.

73

Access

Triggering of the alarm

This is indicated by sounding of the siren

and flashing of the direction indicators for

thirty seconds.

The monitoring functions remain active until

the alarm has been triggered eleven times in

succession.

Failure of the remote control Operating fault

To deactivate the monitoring functions:

When the ignition is switched on, fixed

illumination of the indicator lamp in the button

indicates a fault with the system.

Have it checked by a CITROËN dealer or a

qualified workshop.

F

unlock the vehicle using the key (integral to

the remote control) in the driver's door lock,

open the door; the alarm is triggered,

switch on the ignition; the alarm stops; the

indicator lamp in the button goes off.

F

When the vehicle is unlocked using the remote

control or the Keyless Entry and Starting

system, rapid flashing of the indicator lamp

in the button informs you that the alarm was

triggered during your absence. When the

ignition is switched on, this flashing stops

immediately.

Locking the vehicle without

activating the alarm

F

Lock or deadlock the vehicle using the

key(integral to the remote control) in the

driver's door lock.

74

Access -> Alarm for Your Citroen C4 SUV Second Generation (2010-2018)

Related Topics

Access

Popular Owner Manuals

Latest Owner Manuals