Ease of use and comfort
Refitting a head restraint
Correct driving position
Front head restraints
3
► Insert the head restraint rods into the guides
in the corresponding seat backrest.
► Push the head restraint fully down.
► Press the lug A to release the head restraint
and push it down.
For safety reasons, adjustments must
only be made when the vehicle is
stationary.
Adjusting the height
Before taking to the road and to make the most
of the ergonomic layout of the instruments and
controls, carry out these adjustments in the
following order:
► Adjust the height of the head restraint.
Never drive with the head restraints
removed; they should be in place and
adjusted for the occupant of the seat.
– head restraint height.
– seat backrest angle.
– seat cushion height.
– longitudinal seat position.
Upwards:
Front seats
► Pull the head restraint up to the desired
position; you can feel the head restraint clicking
into position.
Downwards:
► Press lug A to lower the head restraint.
– steering wheel height and reach.
– rear view mirror and door mirrors.
Before moving the seat backwards,
ensure that there is no person or object
that might prevent the full travel of the seat.
There is a risk of trapping or pinching
passengers if present in the rear seats or of
jamming the seat if large objects are placed
on the floor behind the seat.
The head restraint is correctly adjusted
when its upper edge is level with the top
of the head.
Manual adjustments
Removing a head restraint
► Tilt the backrest to the rear to make it easier
to remove the head restraint.
Longitudinal
► Pull the head restraint fully up.
► Press lug A to release the head restraint and
raise it fully.
Once these adjustments have been
made, check that the instrument panel
can be viewed correctly from your driving
position.
► Stow the head restraint securely.
45
English 