Get Ease of use and comfort -> Front seats Guide for Citroen C4 SUV Third Generation (2020-2025)

Ease of use and comfort

Reﬁtting a head restraint

Correct driving position

Front head restraints

► Insert the head restraint rods into the guides

in the corresponding seat backrest.

► Push the head restraint fully down.

► Press the lug A to release the head restraint

and push it down.

For safety reasons, adjustments must

only be made when the vehicle is

stationary.

Adjusting the height

Before taking to the road and to make the most

of the ergonomic layout of the instruments and

controls, carry out these adjustments in the

following order:

► Adjust the height of the head restraint.

Never drive with the head restraints

removed; they should be in place and

adjusted for the occupant of the seat.

– head restraint height.

– seat backrest angle.

– seat cushion height.

– longitudinal seat position.

Upwards:

Front seats

► Pull the head restraint up to the desired

position; you can feel the head restraint clicking

into position.

Downwards:

► Press lug A to lower the head restraint.

– steering wheel height and reach.

– rear view mirror and door mirrors.

Before moving the seat backwards,

ensure that there is no person or object

that might prevent the full travel of the seat.

There is a risk of trapping or pinching

passengers if present in the rear seats or of

jamming the seat if large objects are placed

on the ﬂoor behind the seat.

The head restraint is correctly adjusted

when its upper edge is level with the top

of the head.

Manual adjustments

Removing a head restraint

► Tilt the backrest to the rear to make it easier

to remove the head restraint.

Longitudinal

► Pull the head restraint fully up.

► Press lug A to release the head restraint and

raise it fully.

Once these adjustments have been

made, check that the instrument panel

can be viewed correctly from your driving

position.

► Stow the head restraint securely.

Ease of use and comfort

► Raise the control bar and slide the seat

forwards or backwards.

► Release the control bar to lock the seat in

position on one of the notches.

Lumbar

(driver only)

Backrest angle

► Press one of the controls to obtain the

desired lumbar support.

► Turn the knob to obtain the desired level of

lumbar support.

Massage function

This function provides lumbar massage; it only

operates when the engine is running as well as

in STOP mode of the Stop & Start system.

Electric adjustments

► Turn the knob to obtain the desired angle.

Backrest angle

Height

Activation/Deactivation

► Press this button to activate/deactivate

the function.

Upon activation, the indicator lamp comes on.

The massage function is activated for a period

of one hour.

During this time, massage is performed in

6 cycles of 10 minutes (6 minutes of massage

followed by a 4-minute break).

► Tilt the control forwards or rearwards.

► Pull the control upwards to raise or push it

downwards to lower, until you obtain the position

required.

Cushion height

After one hour, the function is deactivated; the

indicator lamp goes oﬀ.

► Tilt the rear of the control upwards or

downwards to obtain the required height.

Ease of use and comfort

► Adjust the height and reach to suit your

driving position.

► Push the control to lock the steering wheel.

Prolonged use of heated seats is not

recommended for people with sensitive

Heated seats

skin.

There is a risk of burns for people whose

perception of heat is impaired (e.g. illness,

taking medication).

To keep the heated pad intact and to prevent

a short circuit:

For safety reasons, these adjustments

must only be carried out with the vehicle

stationary.

– Do not place heavy or sharp objects on the

seat.

– Do not kneel or stand on the seat.

– Do not spill liquids onto the seat.

– Never use the heating function if the seat

is damp.

Heated steering wheel

(Depending on country of sale)

In cold weather, this function heats the circular

part of the steering wheel.

The function is active only with the engine

running and when the outside temperature is

below 20°C.

It can be activated when the outside temperature

is below 20°C.

► Press the button corresponding to the seat.

► Each press changes the heating level; the

corresponding number of indicator lamps come

on.

► To switch oﬀ the heating, press the button

until all of the indicator lamps are oﬀ.

The system status is memorised when the

ignition is switched oﬀ.

Steering wheel

adjustment

Do not use the function when the seat

is not occupied.

Reduce the heating intensity as soon as

possible.

► With the engine running, press this button to

activate/deactivate the function (conﬁrmed by the

indicator lamp coming on/going out).

The system is automatically deactivated every

time the engine is switched oﬀ.

When the seat and passenger compartment

have reached a satisfactory temperature,

switch the function oﬀ; reducing electrical

consumption in turn decreases energy

consumption.

► When stationary, pull the control to release

the steering wheel.

Ease of use and comfort -> Front seats for Your Citroen C4 SUV Third Generation (2020-2025)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals