Advertisement

Advertisement

Ergonomics and Comfort -> Automatic air conditioning for Your Citroen Dispatch Van Second Generation (2007-2015)

Ventilation  
AUTOMATIC AIR CONDITIONING WITH SEPARATE ADJUSTMENTS  
If your vehicle is fitted with this control  
panel, it is located on the centre console.  
On entering the vehicle, the inside  
temperature may be much colder (or  
Good practice  
For maximum cooling or heating of the  
passenger compartment, it is possible to  
exceed the value 15 by turning until LO is  
displayed or the value 27 by turning until HI  
is displayed.  
For optimum comfort, the difference between  
the value displayed for the driver and for the  
passenger should not be greater than 3.  
warmer) than is comfortable. There is no  
advantage in changing the value displayed  
in order to quickly reach the level of comfort  
required. The system will use its maximum  
performance to reach the comfort value set.  
Ventilation  
Do not cover the sunshine sensor,  
Driver or passenger side comfort value  
Automatic operation  
located on the windscreen behind the  
mirror, it is used for regulation of the air  
conditioning.  
The value indicated on the display  
corresponds to a level of comfort and  
not a temperature in degrees Celsius or  
Fahrenheit.  
AUTO comfort programme  
This is the normal air conditioning system  
operating mode.  
Press this button, the AUTO  
symbol is displayed.  
Turn this control to the left or to  
the right to decrease or increase  
the value. A setting around the  
value 21 provides optimum  
In accordance with the comfort  
value selected, the system  
controls the distribution, the flow and the  
intake of air to guarantee comfort and a  
sufficient circulation of air in the passenger  
compartment. No further action on your part  
is required. No further action on your part is  
required.  
comfort.However, depending on your  
requirements, a setting between 18 and 24  
is usual.  
When the engine is cold, to prevent an  
excessive diffusion of cold air, the ventilation  
will reach its optimum level gradually.  
For your comfort, the settings are stored  
when the ignition is switched off and are  
reinstated the next time the vehicle is  
started, if the temperature in the passenger  
compartment has not changed significantly;  
otherwise, operation resumes in automatic  
mode.  
3
Ventilation  
Air flow  
Intake of exterior air/  
Manual operation  
Recirculation of interior air  
Press the small fan button to  
reduce the flow or the large fan  
button to increase the flow.  
You can, according to your requirements,  
make a different selection from that offered  
by the system by changing a setting.  
The other functions will still be controlled  
automatically. Pressing the AUTO button  
restores fully automatic operation.  
Press this button to recirculate  
the interior air. The recirculation  
symbol is displayed.  
On the display, the blades of the fan darken  
when the flow is increased.  
Recirculation prevents exterior odours  
and smoke from entering the passenger  
compartment. Avoid prolonged operation  
in interior air recirculation mode (risk of  
condensation, odour and humidity).  
Air distribution  
Deactivating the system  
Pressing this button several times  
in succession directs the air flow  
towards:  
Press the air flow small fan  
button until the fan symbol  
disappears.  
Pressing this button again activates the  
intake of exterior air.  
-
-
-
-
the windscreen,  
This action deactivates all of the  
system’s functions, with the exception of the  
air recirculation and rear screen demisting (if  
fitted on your vehicle). Your comfort setting  
is no longer maintained and is switched off.  
Switching the air conditioning  
On/Off  
the windscreen and footwells,  
the footwells,  
Press this button, the A/C  
symbol is displayed and the air  
conditioning is activated.  
the side vents, central vents and  
footwells,  
-
the side vents and central vents.  
Pressing this button again switches off the  
air cooling.  
For your comfort, do not  
deactivate the system for long  
periods. Pressing the large  
fan button or the AUTO button  
reactivates the system with  
the values set before it was  
deactivated.