Advertisement

Advertisement

Ergonomics and Comfort -> Steering wheel controls (Lighting) for Your Citroen Dispatch Van Second Generation (2007-2015)

Steering wheel controls  
Lights off  
Automatic lights  
if your vehicle is fitted with a  
brightness sensor.  
Side lights  
Dipped beam (green)  
Main beam (blue)  
Dipped beam/main beam change  
STEERING WHEEL CONTROLS  
Pull the stalk fully towards you.  
DIRECTION INDICATORS  
(flashing)  
LIGHTING CONTROL  
Lights-on buzzer  
Left: downwards passing  
the point of resistance.  
Front and rear lights  
When the ignition is switched off, when the  
driver’s door is opened, a buzzer sounds if  
you have left your lights on.  
Selection is by turning ring A.  
Right: upwards passing  
the point of resistance.  
Checking by means of the indicator  
lights on the instrument panel is  
described in the "Instruments and  
controls" section of chapter 2.  
3
Steering wheel controls  
Lights off  
Automatic lights  
if your vehicle is fitted with a  
brightness sensor.  
Side lights  
Dipped beam (green)  
Main beam (blue)  
Dipped beam/main beam change  
STEERING WHEEL CONTROLS  
Pull the stalk fully towards you.  
DIRECTION INDICATORS  
(flashing)  
LIGHTING CONTROL  
Lights-on buzzer  
Left: downwards passing  
the point of resistance.  
Front and rear lights  
When the ignition is switched off, when the  
driver’s door is opened, a buzzer sounds if  
you have left your lights on.  
Selection is by turning ring A.  
Right: upwards passing  
the point of resistance.  
Checking by means of the indicator  
lights on the instrument panel is  
described in the "Instruments and  
controls" section of chapter 2.  
3
Steering wheel controls  
Front fog lights (green)  
and rear fog lights (amber,  
2nd rotation of the ring  
forwards).  
Front and rear fog lights  
Daytime lights  
Rotate ring B forwards to switch on and  
rearwards to switch off. The status is  
confirmed by the light on the instrument  
panel.  
Depending on the country in which the  
vehicle is sold, the vehicle may be equipped  
with daytime lights. The dipped headlamps  
come on when the vehicle is started.  
These operate with the side lights and the  
dipped beam headlamps.  
To switch off the front and rear fog  
lights, turn the ring rearwards twice in  
succession.  
This warning light comes on on  
the instrument panel.  
Front fog lights (green,  
1st rotation of the ring forwards).  
The instruments and controls  
(instrument panel, display, air  
conditioning control panel, ...) are only lit  
on switching to the automatic switching on  
of the lights mode or when the lights are  
switched on manually.  
In clear weather or in rain, both day  
and night, rear fog lights dazzle and  
are prohibited.  
Do not forget to switch them off when they  
are no longer needed.  
Automatic switching on of the lights switches  
off the rear fog lamps, but the front fog  
lamps remain on.  
Steering wheel controls  
Activation  
Automatic switching on of the lights  
Turn the ring to the AUTO position. The  
activation of this function is accompanied by  
a message on the display.  
The side lights and dipped  
beam headlamps switch  
on automatically if the light  
is poor, or during operation  
Deactivation  
of the windscreen wipers. They switch off as  
soon as the light becomes bright enough or  
the windscreen wipers stop.  
Turn the ring forwards or rearwards. The  
deactivation of this function is accompanied  
by a message on the display.  
This function is not compatible with the  
daytime lights.  
The function is deactivated temporarily when  
you use the manual lights stalk.  
If the brightness sensor does not  
function correctly, the lights come on  
accompanied by the service warning light,  
an audible signal and a message on the  
display.  
In foggy weather or in snow, the  
brightness sensor can detect sufficient  
light. As a consequence, the lights will  
not come on automatically. If necessary,  
you must switch on the dipped headlamps  
manually.  
HEADLAMP BEAM  
Depending on the load in your vehicle, the  
beam setting must be adjusted.  
0 - No load.  
Consult a CITROËN dealer.  
1 - Partial load.  
2 - Average load.  
3 - Maximum authorised load.  
Do not cover the brightness sensor  
located on the windscreen, behind the  
mirror. It is used for the automatic switching  
on of the lights and for the automatic wipers.  
Initial setting is position 0.  
3