Starting and stopping
Key
Take care to prevent the key from coming
into contact with grease, dust, rain or a
damp environment.
A heavy object attached to the key (key
ring, ...) weighing the key down in the ignition
switch may cause a malfunction.
Good practice when stopping
Minimise engine and gearbox wear
When switching off the ignition, let the
engine run for a few seconds to allow the
turbocharger (Diesel engine) to return to
idle.
STARTING AND STOPPING
Running and accessories position.
Good practice when starting
To unlock the steering, turn the steering
wheel gently while turning the key, without
forcing. In this position, certain accessories
can be used.
Door or bonnet open warning light
Do not press the accelerator when switching
off the ignition.
If this comes on, a door or the
bonnet is not closed correctly,
check!
There is no need to engage a gear after
parking the vehicle.
Starting position.
Diesel pre-heating warning light
The starter is operated, the engine turns
over, release the key.
If the temperature is high
enough, the warning light comes
on for less than one second, you
can start without waiting.
STOP position: steering lock.
The ignition is off. Turn the steering wheel
until the steering locks. Remove the key.
In cold weather, wait for this warning light to
switch off then operate the starter (Starting
position) until the engine starts.
English 