Advertisement

Advertisement

Access -> Alarm for Your Citroen Ds5 SUV First Generation (2011-2018)

63  
Access  
Alarm  
System which protects and provides a deterrent  
against theft and break-in. It provides the  
following types of monitoring:  
Locking the vehicle with full  
alarm system  
Activation  
- Exterior perimeter  
F
Switch off the ignition and get out of the vehicle.  
The system checks for opening of the vehicle.  
The alarm is triggered if anyone tries to open a  
door, the boot or the bonnet...  
F
Press the locking button on the  
remote control or lock the vehicle  
using the Keyless Entry and  
Starting system.  
- Interior volumetric  
The monitoring system is active: the indicator  
lamp in the button flashes once per second.  
The system checks for any variation in the  
volume in the passenger compartment.  
The alarm is triggered if anyone breaks a  
window, enters the passenger compartment or  
moves inside the vehicle.  
Following an instruction to lock the  
vehicle from the remote control or using  
the Keyless Entry and Starting system,  
the exterior perimeter monitoring is  
activated after a delay of 5 seconds,  
the interior volumetric monitoring  
after 45 seconds and the anti-tilt after  
90 seconds.  
Self-protection function  
The system checks for the putting out of  
service of its components.  
The alarm is triggered if the battery, the  
button or the wires of the siren are put  
out of service or damaged.  
- Tilt  
The system checks for any change in the  
attitude of the vehicle.  
The alarm is triggered if the vehicle is lifted,  
moved or knocked.  
For all work on the alarm system,  
contact a CITROËN dealer or  
a qualified workshop.  
If an opening (door, boot...) is not closed  
fully, the vehicle is not locked but the  
exterior perimeter monitoring will be  
activated after a delay of 45 seconds.  
Locking the vehicle  
with exterior perimeter  
monitoring only  
Deactivate the interior volumetric and anti-lift  
monitoring to avoid unwanted triggering of the  
alarm in certain cases such as:  
deactivation of the interior  
deactivation  
volumetric and anti-tilt monitoring  
F
Press the unlocking button on  
F
Switch of the ignition and within  
ten seconds, press this button  
until the indicator lamp is on  
continuously.  
-
-
-
-
-
-
leaving a window partially open,  
leaving a pet in the vehicle,  
washing your vehicle,  
changing a wheel,  
having your vehicle towed,  
transportation by sea.  
the remote control or unlock the  
vehicle using the Keyless Entry  
and Starting system.  
OFF  
F
F
Get out of the vehicle.  
Press the locking button on  
the remote control immediately  
or lock the vehicle using the  
Keyless Entry and Starting  
system.  
The alarm system is deactivated: the  
indicator lamp in the button goes off.  
OFF  
The exterior perimeter monitoring alone is  
activated: the indicator lamp in the button  
flashes once per second.  
Where the vehicle locks itself again  
automatically (occurs 30 seconds after  
unlocking, if a door or the boot is not  
opened), the monitoring system is not  
reactivated automatically.  
To reactivate it, the vehicle must be  
unlocked and locked again, using the  
remote control or the "Keyless Entry  
and Starting" system.  
To be effective, this deactivation must  
be carried out each time the ignition is  
switched off.  
65  
Access  
Triggering of the alarm  
Locking the vehicle without  
activating the alarm  
This is indicated by sounding of the siren  
and flashing of the direction indicators for  
thirty seconds.  
F
Lock or deadlock the vehicle using the key  
(integral with the remote control) in the  
driver's door lock.  
Reactivation of the interior  
volumetric and anti-tilt monitoring  
The monitoring functions remain active until  
the alarm has been triggered eleven times in  
succession.  
F
Press the unlocking button on  
the remote control or unlock the  
vehicle using the Keyless Entry  
and Starting system to deactivate  
the exterior perimeter monitoring.  
When the vehicle is unlocked using  
the remote control or unlocked  
using the Keyless Entry and Starting  
Operating fault  
When the ignition is switched on, fixed  
illumination of the indicator lamp in the button  
indicates a fault in the system.  
Have it checked by a CITROËN dealer or a  
qualified workshop.  
OFF  
system, rapid flashing of the indicator  
lamp in the button informs you that the alarm  
was triggered during your absence. When  
the ignition is switched on, this flashing stops  
immediately.  
F
Press the locking button on the  
remote control or lock the vehicle  
using the Keyless Entry and  
Starting system to activate all the  
monitoring functions.  
Automatic activation*  
2 minutes after the last door or the boot is  
Failure of the remote control  
In this case, carry out the operations below to  
closed, the system is activated automatically.  
deactivate the monitoring functions:  
F
To avoid triggering the alarm on entering  
the vehicle, first press the unlocking button  
on the remote control or unlock the vehicle  
using the Keyless Entry and Starting  
system.  
The indicator lamp in the button  
again flashes once per second.  
F
Unlock the vehicle using the key (integral  
with the remote control) in the driver's door  
lock.  
OFF  
F
F
Open the door; the alarm is triggered.  
Switch on the ignition; the alarm stops. The  
indicator lamp in the button goes off.  
* Depending on the country of sale.