67
Access
deactivating the rear
window controls
Reinitialisation of the
electric windows
Safety anti-pinch
Following reconnection of the battery, the
When the window rises and meets an obstacle,
it stops and immediately partially lowers again.
In the event of unwanted opening of the
window on closing, press the switch until the
window opens completely, then pull the switch
immediately until the window closes. Continue
to hold the switch for approximately one second
after the window has closed.
For the safety of your children, press
safety anti-pinch function must be reinitialised.
The safety anti-pinch function is not active
during these operations.
switch 5 to prevent operation of the
rear windows irrespective of their
position.
For each window:
-
-
lower the window completely, then raise
it. It will rise in steps of a few centimetres
each time the switch is pressed. Repeat
the operation until the window closes
completely,
continue to press the switch for at least
one second after reaching this position,
window closed.
The warning lamp in the button comes on,
accompanied by a message confirming
activation. It remains on, as long as the child
lock is activated.
The interior controls for the rear doors are also
deactivated.
Opening the doors from the outside and
operation of the rear windows from the driver's
controls remain possible.
The safety anti-pinch function is not active
during this operation.
In the event of contact during operation of the windows, you must reverse the movement of
the window. To do this, press the switch concerned.
When operating the passenger electric window switches, the driver must ensure that no one
is preventing correct closing of the windows.
The driver must ensure that the passengers use the electric windows correctly.
Be particularly aware of children when operating the windows.
Be aware of passengers and other persons present close to the vehicle when closing the
windows remotely using the the electronic key or the Keyless Entry and Starting system.
English 
