Get Audio and Telematics -> Audio system Guide for Citroen Relay Van 2014-2024

Touch Screen Audio - Telematic System

"Hands-free calls" voice commands

Commands available during a call.

These voice commands can be issued from any main screen page during a call after pressing the telephone button on the steering wheel, as

long as there is no telephone call in progress.

Level 1

Level 2

Level 3

comment

Send 0123456789

The selection tones for 0123456789 are sent.

Send "Voicemail

password"

The selection tones for the numbers saved in

"Voicemail password" are sent.

Activate speakers

Transfers the call to the telephone or the system

Activate / deactivate

mike

System mike ON / OFF.

Audio System

Audio system

Multimedia audio system - Bluetooth^®telephone

Contents

268

First steps

Steering mounted controls

Radio

269

270

Media

272

Telephone

274

Settings

275

Voice commands

276

The system is coded in such a way that it will only operate in your

vehicle.

As a safety measure, the driver must only carry out operations

which require prolonged attention while the vehicle is stationary.

When the engine is not running and to prevent discharging of the

battery, the audio system may switch off following activation of

energy economy mode.

11

Audio System

First steps

Radio buttons 1 to 6:

Select a pre-set radio station.

Long press: pre-set a station.

Random (shuffle) play

Repeat play.

Mute / restore sound.

On/off, volume setting.

Rotate: scroll through a list or adjust

radio station.

Press: confirm the option displayed in

the screen.

Automatic frequency search down.

Select the previous USB track.

Press and hold: fast back.

Select FM and AM wavebands.

Select USB or AUX source.

Information on the current radio

station or media.

Automatic frequency search up.

Select the next USB track.

Press and hold: fast forward.

Select preset stations.

FM-A, FM-B, FM-C, AM-A, AM-B,

AM-C.

Display the list of connected

telephones.

Display the menu and adjust options.

Abandon the current operation.

Go up one level (menu or folder).

Audio System

Steering mounted controls

Pause / restore the CD, USB/iPod,

Bluetooth^®sources.

Mute / restore sound from the radio.

Switch the microphone off / on during

a telephone call.

Accept an incoming call.

Radio, push up or down: select the

next / previous station.

Radio, hold up or down: sweep

frequencies up / down until the button

is released.

Accept a second incoming call and

put the current call on hold.

Switch on voice recognition for the

telephone function.

Interrupt a voice message to issue

another voice command.

Media, push up or down: select the

next / previous track.

Interrupt voice recognition.

Media, hold up or down: fast forward /

back until the button is released.

Push up or down: increase or

decrease the volume for voice

announcements and music sources,

hands-free and speaking texts.

Switch voice recognition on.

Interrupt a voice message to start a

new voice command.

Reject the incoming call.

End the call in progress.

Interrupt voice recognition.

11

Audio System

Radio

Selecting a station

Presetting a station

rdS

Press the "rAdIO" button to select

the FM or AM waveband.

The surroundings (hills, buildings,

tunnel, parking, under ground...) may

prevent reception, including RDS

alternative frequencies.

This phenomenon is normal in the

propagation of radio waves and does

not in any way imply a fault with the

audio system.

RDS, if displayed, makes it possible

to continue listening to the same radio

station using the alternative frequencies

function. However, in certain conditions

it may not be possible to stay with the

same station as not all radio stations

cover the entire country. When reception

is poor the system switches to a regional

frequency.

Press the "A-B-c" button to select

one of the three sets of preset

stations.

Make a long press one of the buttons

to preset the current radio station.

The name of the station is displayed

and an audible signal confirms the

preset.

Press the "rAdIO" button to select

the FM or AM waveband.

Press the MEnu button.

Press "InFO" to display information

on the current radio station.

Briefly press one of the buttons to

carry out an automatic search down/

up for radio stations.

Select "regional" then press to

switch RDS on or off.

Turn the dial to carry out a manual

search down/up for radio stations.

Press the dial to display the list of

stations received locally.

Turn the dial to choose a radio station

then press to select it.

Audio System

Alternative frequencies (AF) receiving tA messages

Select "Alternative frequencies

The TA (Traffic Announcement)

(AF)" then press to activate or

function gives priority to playing TA

deactivate the frequency.

alert messages. To be active, this

function requires good reception of

When the "regional" function is on,

a radio station that broadcasts this

the system can then search for a

type of message. As soon as traffic

stronger frequency at any time.

information is broadcast, the media

playing is interrupted automatically

to transmit the TA message. Normal

play of the media is restored after

transmission of the message.

Press the "MEnu" button.

Select "traffic information

(tA)" then press to switch traffic

announcements on or off.

11

Audio System

Media

uSB player

uSB port

Auxiliary socket (Aux)

Insert a USB memory stick or connect a

peripheral device to the USB port in the central

storage space, provided for transferring data

to the system, using a suitable cable (not

supplied).

Located on the centre console, this port is used

only for powering and recharging the portable

device connected.

Connect the portable device (MP3 player…) to

the auxiliary Jack socket using an audio cable

(not supplied).

First adjust the volume on your portable device

(to a high level). Then adjust the volume of your

audio system.

The system builds playlists (in temporary

memory), an operation which can take from

a few seconds to several minutes at the first

connection.

Control is via the portable device.

The functions of the device connected to the

"AUX" socket are controlled directly from the

device itself: changing track / folder / playlist or

starting/ending/pausing play using the audio

system control panel or steering mounted

controls is therefore not possible.

Do not leave the cable of your portable device

connected to the AUX socket when not in use,

to avoid possible noises from the speakers.

Reduce the number of non-music files and the

number of folders to reduce the waiting time.

The playlists are updated every time the

ignition is switched off or connection of a USB

memory stick. However, the audio system

memorises these lists and if they are not

modified, the loading time will be shorter.

Audio System

Information and advice

connecting Apple^®players

The system supports USB mass storage

devices, BlackBerry^®devices or Apple^®

players via USB ports. The adaptor cable is not

supplied.

Other peripherals, not recognised on

connection, must be connected to the auxiliary

socket using a Jack cable (not supplied).

The classifications available are those

of the portable device connected

(artists / albums / genres / tracks /

playlists / audio books / podcasts).

The default classification used is by

artist. To modify the classification used,

return to the first level of the menu

then select the desired classification

(playlists for example) and confirm

to go down through the menu to the

desired track.

Connect the Apple^®player to the USB port

using a suitable cable (not supplied).

Play starts automatically.

Use only USB memory sticks formatted FAT 32

(File Allocation Table).

It is advisable to restrict file names to

20 characters, without using of special

characters (e.g.: " " ? ; ù) to avoid any playing

and displaying problems.

Control is via the audio system.

The version of software in the audio

system may not be compatible with the

generation of your Apple^®player.

The system does not support

two identical devices connected at

the same time (two memory sticks,

two Apple^®players) but it is possible

to connect one memory stick and one

Apple^®player at the same time.

It is recommended that official Apple^®

USB cables are used to ensure correct

operation.

11

Audio System

Telephone

Pairing a Bluetooth^®

telephone

receiving a call

An incoming call is announced by a ring and a

superimposed display in the screen.

When pairing, a screen page is displayed

showing progress in the operation.

As a safety measure and because they

require prolonged attention on the part

of the driver, the operations for pairing

the Bluetooth mobile telephone to the

hands-free system of the audio system

must be carried out with the vehicle

stationary.

Press this button to accept the

incoming call.

If the operation fails, we recommend

switching the function Bluetooth of

your telephone off and then on again.

Or press this button to reject the call.

Switch on the Bluetooth function of your

telephone and ensure that it is "visible to all"

(telephone configuration).

When the pairing procedure has

finished successfully, a screen page

with "connection successful"

appears:

Ending a call

To reject a call, press this button at

the steering mounted controls.

Press "Phone".

Confirm to display the menus.

If no telephone has yet been paired

in the system, a special page is

displayed in the screen.

The telephone menu gives access to

the following functions in particular:

"call log", "contacts"*, "Keypad".

Making a call

Select "connect tel" to start the

pairing procedure, and search for the

name of the system in the telephone.

Select "call log" for access to the

recent calls made.

Select "contacts" to display your

contacts and use the dial to scroll

through the list.

Using the telephone's keypad, enter the PIN

displayed in the screen of the system or

confirm in the telephone the PIN displayed.

To dial a number, use the system's

"Keypad".

* If your telephone is fully compatible.

Audio System

Settings

System settings

Audio

Press the "MEnu" button.

Select "System settings" then

press to display the list of settings for

activating or deactivating options:

Select "Audio" then press to display

the list of settings for activating or

deactivating options:

-

"reset default value"

"20 min. delay for switching off"

"Limit initial volume"

"Automatic"

-

"treble"

"Mid-range"

"Bass"

"(Activate/deactivate)"

"Volume linked to vehicle

speed"

-

"Loudness"

The audio settings are different and

independent for each audio source.

11

Audio System

Voice commands

Information - using the system

Instead of touching the screen, you can

use your voice to issue commands to

the system.

-

for best operation, it is

Voice interaction can be quickly used

if these buttons are pressed during

a voice message from the system; It

allows a voice command to be issued

directly.

For example, if the system is speaking

a voice help message and if you want

to know the command to give the

system, by pressing these buttons, the

voice message is interrupted and the

desired voice command can be spoken

directly (so avoiding the need to listed

to the complete voice help message).

When the system is waiting for a voice

command from the user, pressing these

buttons closes the voice session.

recommended that the windows

and opening roof (for versions/

markets where it is available) be

closed to avoid interference from

extraneous noises.

To ensure that your voice commands

are always recognised by the system,

we recommend that you follow the

advice below:

-

speak with a normal tone of voice,

before speaking, always wait for

the "beep" (audible signal),

-

the system is able to recognise

the voice commands delivered,

independent off gender, tone and

inflexion of the voice of the person

speaking,

Steering mounted controls

This button switches on the

"Telephone" voice recognition mode,

which makes it possible to start calls,

view the log of recent/received/made,

display contacts, etc.

-

keep the noise level inside the

vehicle as low as possible,

before speaking a voice command,

ask other passengers not to speak.

As the system recognizes voice

commands whatever is said, when

more than one person speaks

at the same time, it is possible

that the system will recognise

commands different or additional to

the one intended,

This button switches on the "Radio/

Media" voice recognition mode,

which makes it possible to tune to a

specific radio station radio or specific

AM/FM radio frequency, play a track

or an album on a USB memory stick/

iPod/MP3 CD.

Every time a button is pressed, a

"beep" (audible signal) is produced

and the screen displays a page of

suggestions asking the user to speak a

command.

Audio System

Global voice commands

These commands can be made from any screen page after pressing the voice recognition or telephone button located on the steering wheel,

as long as there is no telephone call in progress.

Level 1

Level 2

Level 3

comment

Provides generic help to the user by suggesting

certain available commands.

Help

cancel

repeat

Closes the current voice session.

Repeats to the user the last voice message spoken.

Provides the user with detailed description of how

to use the voice system.

Voice tutorial

11

Audio System

"telephone" voice commands

If a telephone is connected to the system, these voice commands can be issued from any main screen page after pressing the telephone

button on the steering wheel, as long as there is no telephone call in progress.

If there is no telephone connected, a voice message announces: "No telephone connected. Connect a telephone and try again" and the voice

session will be closed.

Level 1

Level 2

Henri dupont

Level 3

comment

Dials the telephone number associated with contact

call*

Henri Dupont.

Dials the telephone number labelled mobile phone

associated with contact Henri Dupont.

Henri dupont

Mobile phone

call number

call again

0123456789

Calls the telephone number 0123456789.

Calls the number or contact of the last call made.

Calls the number or contact of the last call received.

call back

Displays the list of recent calls: outgoing, missed

and incoming.

recent calls*

calls made*

Missed calls*

Displays the list of outgoing calls.

Displays the list of missed calls.

* This function is available only if the telephone connected to the system supports downloading of contacts and recent calls and if the

download has been done.

Audio System

"telephone" voice commands

It is possible to replace the "Mobile phone" label by one of the three other labels available: "Home"; "Work"; "Other".

Level 1

Level 2

Level 3

comment

Incoming calls*

Displays the list of incoming calls.

Displays the list of contacts in the telephone

connected.

contacts*

Displays the contact Henri Dupont in the list with all

of the numbers saved.

Search*

Henri dupont

Displays the telephone number labeled as mobile

phone associated with contact Henri Dupont.

Search*

Henri dupont

Mobile phone

If the telephone allows the "first name" (Henri) and "surname" (Dupont) to be entered in two separate fields, issue the following voice

commands:

-

"Call"; "Henri"; "Dupont" or "Call"; "Dupont"; "Henri".

"Search"; "Henri"; "Dupont" or "Search"; "Dupont"; "Henri".

* This function is only available if the telephone connected to the system supports downloading of contacts and recent calls and if the

download has been done.

11

Audio System

"AM /FM radio" voice commands

These voice commands can be issued from any main screen page after pressing the voice recognition button on the steering wheel, as long as

there is no telephone call in progress.

Level 1

Level 2

Level 3

comment

Tunes the radio the the frequency 105.5 on the

FM waveband.

tune to

tune to*

105.5

940

FM

AM

FM

Tunes the radio the the frequency 940 on the

AM waveband.

FIP

Tunes the radio the the station FIP.

* The name "FIP" can be replaced by any other FM station name received by the radio. Not all radio stations provide this service.

Audio System

"Media" voice commands

These voice commands can be issued from any main screen page after pressing the voice recognition button on the steering wheel, as long as

there is no telephone call in progress.

Level 1

Play track

Level 2

Level 3

comment

Plays the track "Title 1".

"title 1"

Play album

"Album 1"

"Artist 1"

"jazz"

Plays the songs in album "Album 1".

Plays the songs by "Artist 1".

Play artist

Play musical genre

Play playlist

Plays the songs of the "Jazz" musical genre.

Plays the songs in the playlist "Playlist 1".

Plays the podcast "Podcast 1".

Plays the audio book "Book 1".

Plays track number "5".

"Playlist 1"

"radio 1"

"Book 1"

"5"

Play podcast

Play audio book

Play track number

Select

Scan

"uSB"

Selects the USB media as the active audio source.

Displays the list of albums available.

"Album"

11

Audio and Telematics -> Audio system for Your Citroen Relay Van 2014-2024

Related Topics

Audio and Telematics

Popular Owner Manuals

Latest Owner Manuals