Touch Screen Audio - Telematic System
Pairing a Bluetooth®
telephone
When pairing, a screen page is displayed
showing progress in the operation.
The services available depend on the network,
the SIM card and the compatibility of the
Bluetooth device used. Check the instructions
for your telephone and with your service
provider for the services to which you have
access.
For reasons of safety and because they
require prolonged attention on the part
of the driver, the operations for pairing
a Bluetooth mobile telephone to the
hands-free system of the audio system
must be carried out with the vehicle
stationary.
If the operation fails, we recommend
switching the Bluetooth function of
your telephone off and then on again.
When you return to your vehicle, the last
telephone connected reconnects automatically,
within around 30 seconds of switching on the
ignition (with Bluetooth switched on).
To modify the automatic connection profile,
select the telephone in the list then select the
desired setting.
Switch on the Bluetooth function of your
telephone and ensure that it is "visible to all"
(telephone configuration).
When the pairing procedure has
finished successfully, a screen page
appears:
-
reply "Yes" to the question, the
mobile phone is saved as the
favourite (this telephone will have
priority over other telephones
paired subsequently).
Press "PHOnE".
If no telephone has yet been paired
in the system, a special page is
displayed in the screen.
The profiles compatible with the system are:
HFP, OPP, PBAP, A2DP, AVRCP, MAP.
-
if no other device has been
paired, the system considers
the first device paired to be the
favourite.
Select "Yes" to start the pairing procedure,
and search for the name of the system in the
telephone (otherwise selecting "No", the main
Telephone screen page is displayed).
Automatic reconnection
When the ignition is switched on, the telephone
connected when the ignition was last switched
off reconnects automatically, if this connection
mode had been set during the pairing
For telephones not set as favourite, the
order of priority is determined in the
order of connection. The last telephone
connected has the highest priority.
Select the name of the system and, depending
on the telephone, using the telephone's
keypad, enter the PIN displayed in the screen
of the system or confirm in the telephone the
PIN displayed.
procedure (see previous pages).
Connection is conformed by the display of a
message and the name of the telephone.
English 
