Access
-
-
-
-
-
leaving a window partially open,
washing your vehicle,
changing a wheel,
having your vehicle towed,
transport by ship.
The indicator lamp for the button goes off.
F Reactivate the full alarm system by locking
the vehicle using the remote control or the
"Keyless Entry and Starting" system.
The indicator lamp for the button flashes once
per second again.
Locking the vehicle without
activating the alarm
F Lock or deadlock the vehicle using the key
(integral to the remote control) in the driver's
door lock.
Deactivating the interior
volumetric monitoring
Triggering of the alarm
Operating fault
F Switch off the ignition and within ten
seconds, press the alarm button until the
indicator lamp is on continuously.
F Get out of the vehicle.
F Immediately lock the vehicle using the
remote control or the "Keyless Entry and
Starting" system.
The exterior perimeter monitoring alone is
activated: the indicator lamp for the button
flashes once per second.
To take effect, this deactivation must be carried
out each time the ignition is switched off.
This results in sounding the siren and flashing
the direction indicators for thirty seconds.
The monitoring functions remain active until
the alarm has been triggered eleven times in
succession.
When the vehicle is unlocked using the remote
control or the "Keyless Entry and Starting"
system, rapid flashing of the indicator lamp
for the button informs you that the alarm was
triggered during your absence. When the
ignition is switched on, this flashing stops
immediately.
When the ignition is switched on, fixed
illumination of the indicator lamp for the button
indicates a fault with the system.
Have it checked by a CITROËN dealer or
a qualified workshop.
Automatic activation
(Depending on the country where the product
is sold.)
The system is activated automatically 2 minutes
after the last door or the boot is closed.
F To avoid triggering the alarm on entering
the vehicle, first press the unlocking button
on the remote control or unlock the vehicle
using the "Keyless Entry and Starting"
system.
Reactivating the interior
volumetric monitoring
Failure of the remote
control
F Deactivate the exterior perimeter monitoring
by unlocking the vehicle using the remote
control or the "Keyless Entry and Starting"
system.
To deactivate the monitoring functions:
F Unlock the vehicle using the key (integral to
the remote control) in the driver's door lock,
F Open the door; this sets off the alarm.
F Upon switching on the ignition the alarm
stops. The indicator lamp for the button
goes off.
54
English 
