Safety
(d)
To install a child seat on a rear seat,
rearward facing or forward facing,
move the front seat forward, then
straighten the backrest to allow enough
space for the child seat and the child's
legs.
"ISOFIX" mountings
Your vehicle has been approved in accordance
with the latest ISOFIX regulations.
The seats, shown below, are fitted with ISOFIX
compliant mountings:
(e)
U:
To install a child seat on a rear seat,
rearward facing or forward facing,
adjust the rear seat to the fully back
position with the backrest straightened.
seat suitable for the installation of
a child seat secured using a seat belt
and universally approved, rearward
and/or forward facing, with the front
seat which must be adjusted in the
intermediate longitudinal position.
-
a ring B, located under a cover on the back
of the top of the seat backrest, referred to as
the TOP TETHER for fixing the upper strap.
Its position is indicated by a marking.
Located on the back of the seat backrest, the
TOP TETHER is used to secure the upper strap
of child seats that have one. This device limits
forward tipping of the child seat, in the event of
a front impact.
There are three rings for each seat:
5
U(R): as with U, with the passenger seat
that must be adjusted to the low
position with 11 actions on the seat
height control and in the intermediate
longitudinal position.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with two
latches which are easily secured on the two
rings A.
Some also have an upper strap which is
attached to ring B.
-
two rings A, located between the vehicle's
seat backrest and cushion, indicated by
a marking,
To secure the child seat to the TOP TETHER:
-
remove and stow the head restraint before
installing the child seat on the seat (refit it
once the child seat has been removed),
119
English 
