ALL TYPES
FILLING AND BLEEDING THE COOLING CIRCUIT
FILLING AND BLEEDING
- Fit the filling cylinder 4520-T to the filler orifice.
- Use the coolant to ensure protection between - 15° C and - 37° C.
- Slowly fill the system.
NOTE : Keep the cylinder filled up (visible level).
- Close each bleed screw as soon as the coolant flows without air bubbles.
- Start the engine : Engine speed 1500 rpm.
- Maintain this speed until the cooling fans have cut in and cut out.
- Stop the engine and allow it to cool down.
- Remove the filling cylinder 4520-T.
- Top up the system to the max. mark, with the engine cold.
- Refit the filler cap.
E5AP141C
126
English 
