2002-2008 Cupra Born SUV Air conditioning User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Air conditioning for Your Cupra Born SUV First Generation (2002-2008)

Air conditioning  
Operating the air conditioning with voice  
commands  
Dust and pollen ꢀlter  
Air conditioning  
The dust and pollen ꢀlter with its activated  
charcoal cartridge serves as a barrier against  
impurities in the air taken into the vehicle inte-  
rior.  
Depending on the equipment, some of the  
air conditioning functions can be operated by  
voice control ››› page 240.  
Heating, ventilation and  
cooling  
The dust and pollen ꢀlter must be changed  
regularly so that air conditioner performance is  
not adversely aꢁected.  
Passenger recognition function  
Introduction  
The front passenger recognition function turns  
down the air conditioning in these areas if no  
occupation is detected in them, with the aim  
of reducing the vehicle’s energy consumption.  
The 2-zone Climatronic heats, ventilates,  
cools and dehumidiꢀes the vehicle interior,  
considering it as two separate air conditioning  
zones.  
If the ꢀlter loses eꢁiciency prematurely due  
to use in areas with very high levels of air  
pollution, the ꢀlter must be changed more fre-  
quently than stated in the Service Schedule.  
When the drive system is on, the vehicle rec-  
ognises whether a person is sitting in a seat in  
the vehicle with a seatbelt fastened.  
There are several ways to switch on the air con-  
ditioning:  
WARNING  
The turning down of the air conditioning is in-  
dicated as follows:  
Reduced visibility through the windows in-  
creases the risk of serious accidents.  
●
Press  
in the air conditioning menu  
››› page 131.  
●
●
Always ensure that all windows are free of  
●
Front passenger area: on the front passenger  
OR: Press  
in the air conditioning menu  
ice and snow, and that they are not fogged,  
so as to maintain good visibility of everything  
outside.  
temperature setting, which will display ECOin-  
stead of the selected temperature.  
››› page 131 or on the light control  
››› page 113.  
●
OR: Change the desired temperature.  
●
●
Only drive when you have good visibility.  
Always ensure that you use the air condi-  
Air conditioning percentage reached func-  
tion  
●
OR: Press  
tioner and heated rear window to maintain  
good visibility.  
Optimal air conditioning performance is ach-  
ieved when the vehicle interior is closed. If a  
great deal of heat accumulates in the interior,  
ventilating it can accelerate the cooling proc-  
ess.  
Shows how long it will take to reach the set  
comfort temperature as a percentage.  
●
Never leave the air recirculation on for a  
Once reached, 100% will be displayed on the  
screen. There is one indicator for the driver's  
area and another for the passenger area.  
long period of time. If the cooling system  
is switched oꢁ and air recirculation mode  
switched on, the windows can mist over very  
quickly, considerably limiting visibility.  
Some functions and menu tabs depend on the  
equipment.  
●
Switch air recirculation mode oꢁ when it is  
not required.  
128  
Heating, ventilationandcooling  
NOTICE  
Food, medicines and other objects sensitive  
to heat or cold may be damaged or made  
unsuitable for use by the air coming from the  
vents.  
●
Never place food, medicines or other tem-  
perature-sensitive objects close to the air  
vents.  
Note  
●
When the cooling system is turned oꢁ, air  
coming from the outside will not be dried. To  
prevent fogging of the windows, CUPRA rec-  
ommends leaving the cooling system turned  
on. To do this, press the function button  
The icon should light up.  
.
●
Keep the air intake slots in front of the  
windscreen free of snow, ice and leaves to  
ensure heating and cooling are not impaired,  
and to prevent the windows from misting  
over.  
●
The air from the vents ꢂows through the  
vehicle interior and is extracted by slots in  
the luggage compartment designed for this  
purpose. Therefore, you should avoid ob-  
structing these slots with any kind of object.  
●
It is advisable to turn on the air condition-  
ing at least once a month, to lubricate the  
system gaskets and prevent leaks. If a de-  
crease in the cooling capacity is detected,  
a Technical Service should be consulted to  
check the system.  
129  
Air conditioning  
Climatronic control  
Fig. 113 Schematic representation: air-  
conditioning functions.  
1
2
OR: use the touch zones  
and  
(blue /  
A
Climabar  
red) to adjust the temperature of the Air  
Conditioning ››› Fig. 113.  
Switching air recirculation on and oꢁ  
››› page 132.  
Fixed bar at the top of the Infotainment System  
A
screen ››› Fig. 113  
(even if it is oꢁ) where  
the following Air Conditioning functions are lo-  
cated:  
By pressing it, you can access the Air  
Temperature setting submenu  
conditioning menu ››› page 131.  
Access the seat heating submenu  
››› page 133.  
/
Press to set the desired temperature on  
the driver or front passenger side. You can  
also slide your ꢀnger over the bar to make  
the adjustment.  
Temperature Sliding your ꢀnger from left to  
right or vice versa over the numbers sets  
the desired temperature on the corre-  
sponding side. Press on the same numbers  
to access the temperature adjustment  
submenu.  
Synchronizes the temperature on the  
driver's side with the other zones.  
130  
Heating, ventilationandcooling  
Air Conditioning Menu  
Fig. 114 Schematic diagram: Air conditioning  
menu.  
Within the Air Conditioning menu, the follow-  
ing submenus are found depending on the  
equipment:  
indicate the outlet temperature of the air,  
but the requested temperature depending  
on the surrounding conditions.  
mum of 10 minutes. It should be switched  
oꢁ as soon as the glass is demisted. To  
avoid possible damage to the battery, an  
automatic temporary disconnection of this  
function is possible, coming back on when  
normal operating conditions are re-estab-  
lished.  
Manual adjustment of fan speed by  
Front Submenu  
pressing or  
.
Submenu for the air conditioning in the front  
of the passenger compartment where the fol-  
lowing functions are found:  
Manual steering wheel heating setting  
with three heating levels. Press the func-  
Switching the cooling and demisting  
system on/oꢁ.  
tion button  
repeatedly to achieve the  
desired level. To disconnect it, press sev-  
Switching the Climatronic oꢁ/on  
Switching the maximum cooling output  
on and oꢁ. The air recirculation mode  
switches on automatically and the Clima-  
tronic automatically directs the air to the  
upper body.  
eral times until no LED is on ››› page 135.  
A
››› Fig. 114  
.
The defrost/demist function of the Cli-  
matronic removes ice and condensation  
from the windscreen. The air is dehu-  
midiꢀed and the fan is set high.  
Vents Press the arrows displayed on the air  
vents to select the distribution of air to-  
wards one or more of the following zones:  
feet, upper body or windscreen. The col-  
our represented by the arrows does not  
In this mode, the system automatically  
regulates the interior temperature, fan  
speed and air distribution for optimal  
Switches the heated window on or oꢁ  
when the drive system is switched on.  
It switches oꢁ automatically after a maxi-  
131  
Air conditioning  
thermal comfort. The  
mode will de-  
Fast heating: automatically adjusts the  
air conditioning to heat the vehicle inte-  
rior for a certain amount of time.  
Air recirculation  
activate as soon as manual changes are  
made to the fan speed, air distribution,  
windscreen demisting or air recirculation.  
Air recirculation mode prevents the ambient  
air from entering the interior.  
Fan speed in  
mode can be set in the  
AirCare Climate submenu  
When the outside temperature is very high,  
selecting manual air recirculation mode for  
a short period refreshes the vehicle interior  
more quickly.  
Climaproꢀle (low, medium or high) by suc-  
The air conditioning system contains a ꢀlter  
that can reduce allergen contaminants.  
cessively pressing the function button  
Climaproꢀle adjustment is also possible in  
the Settings submenu.  
.
When the Air Care function is activated, the  
recirculation mode is on and the air is regula-  
ted automatically and continuously, as long as  
there is no detection of fogging hazard.  
For safety reasons, air recirculation is discon-  
nected when  
is pressed or when a sensor  
iClimate submenu  
detects that the vehicle's windows may mist  
up.  
Submenu where diꢁerent smart and/or auto-  
matic functionalities are located, depending  
on the version.  
●
oꢁ.  
Press  
to switch the AirCare function on/  
Switching the manual air recirculation mode  
on and oꢁ  
●
Press to access information about the Air-  
Care system function.  
Warm hands: automatically adjusts for a  
certain time the air conditioning to heat  
the steering wheel area.  
●
Press the  
button to switch manual air re-  
Settings submenu  
circulation on or oꢁ.  
Cool feet: automatically adjusts for a cer-  
tain time the air conditioning to cool the  
footwell area.  
Submenu where the following settings are lo-  
cated:  
Climatronic automatic air recirculation  
mode  
●
Automatic recirculation: to switch automatic  
Defog the windows: automatically ad-  
justs for a certain time the air condition-  
ing to defog the windscreen.  
With the automatic air recirculation mode ac-  
tivated, the entry of fresh air into the cabin  
interior is enabled. If the system detects a high  
concentration of hazardous substances in the  
ambient air, air recirculation mode is switched  
on automatically. When the level of impurities  
drops to within a normal range, recirculation  
mode is switched oꢁ.  
air recirculation on and oꢁ ››› page 132.  
●
Climaproꢀle: To adjust the fan speed (low,  
medium or high) during operation in mode.  
turns the  
Warm feet: automatically adjusts for a  
certain time the air conditioning to heat  
the footwell area.  
●
Smart heated seat: Pressing  
smart heated seats function on/oꢁ for the  
driver and front passenger ››› page 133.  
Fresh Air: automatically adjusts for a cer-  
tain time the air conditioning to ventilate  
the passenger compartment.  
●
Smart heated steering wheel: Press  
to  
switch the function on/oꢁ ››› page 135.  
The system is unable to detect unpleasant  
smells.  
Fast cooling: automatically adjusts the air  
conditioning to ventilate the vehicle in-  
terior for a certain amount of time.  
132  
Heating, ventilationandcooling  
Seat heating  
●
Automatic air recirculation is activated and  
If the heating of this seat disconnects auto-  
matically, you can switch it on again manually if  
necessary, even if the seat is unoccupied.  
deactivated in the air conditioning settings  
menu. An A will be displayed next to the Clima-  
bar’s recirculation icon , indicating that the  
function is active.  
The front seats have three levels of electric  
heating.  
Smart heated seat  
Control seat heating  
This is an smart function that automatically ac-  
tivates and regulates the driver and front pas-  
senger seat heating for greater comfort.  
WARNING  
Press the  
icon on the Climabar ››› Fig. 113  
A
to open the seat heating menu.  
Stuꢁy or used air will increase fatigue and re-  
duce driver concentration possibly resulting  
in a serious accident.  
The seat heating for the driver's seat and front  
passenger seat can be adjusted separately to  
achieve fully personalised comfort.  
●
Press the left or right seat icon to connect  
the seat heating to maximum power.  
●
Never leave the fresh air fan turned oꢁ or  
●
Press the left or right seat icon repeatedly  
use the air recirculation for long periods of  
time; the air in the vehicle interior will not be  
refreshed.  
until the desired level is adjusted.  
To access the smart heated seats function,  
the CUPRA CONNECT personalisation service  
●
To switch oꢁ seat heating, press the corre-  
must ꢀrst be activated ››› page 220.  
sponding seat icon several times until no LED is  
on.  
●
To switch the function on/oꢁ, go to the sub-  
NOTICE  
menu Settings > Use of the driver/front pas-  
●
You can also adjust the seat heating level  
senger smart heated seats.  
by using two ꢀngers to press the sensor ꢀeld  
In vehicles with an air conditioner, do not  
smoke when air recirculation is switched on.  
The smoke may be deposited on the cooling  
evaporator and on the active combination ꢀl-  
ter and cause permanent unpleasant odours.  
1
2
››› Fig. 113 or  
(left or right seat).  
The smart heated seats function requires a  
period for learning usage habits. Information  
about the start of the learning process is  
shown in the seat heating submenu on the  
Infotainment display. During this process, the  
status LEARNINGwill be displayed, and its evo-  
lution will also be shown by a progress bar.  
If the ignition is switched on again in approx.  
the next 10 minutes, the driver seat heating is  
automatically turned on to the level set the last  
time.  
Note  
If the passenger leaves his or her seat while  
the seat heater and drive system are switched  
on, the heating of that seat disconnects auto-  
matically. The indication on the infotainment  
system turns grey after approx 2 seconds. If  
the passenger sits down again while the drive  
system is still switched on, the seat heating  
switches on again automatically.  
When the outside temperature is very high,  
brieꢂy switching on the air recirculation  
mode helps to cool the vehicle interior more  
quickly.  
Seat heating level 3 (maximum) needs to be  
used to ensure that habits are learned cor-  
rectly.  
During the learning period, it is advisable to  
use the seat heater at diꢁerent outside tem-  
peratures to achieve optimum performance of  
the smart heated seats.  
133  
Air conditioning  
WARNING  
Seat heater usage learning will not occur if the  
seat heater is used straight after seat heating  
during stationary air conditioning.  
NOTICE  
●
People who cannot perceive pain or temper-  
ature because of medications, paralysis or  
chronic diseases (e.g. diabetes) or have a  
limited perception of these, may suꢁer burns  
to the back, buttocks or legs when using seat  
heating.  
To avoid damaging the heating elements of  
the seat heaters, please do not kneel on the  
seat or apply sharp pressure to a single point  
on the seat cushion or backrest.  
Once the learning period is over, the heated  
seats are turned on and their temperature level  
adjusted automatically. The status AUTOis dis-  
played in the seat heating submenu.  
●
Liquids, sharps objects and insulating ma-  
terials (e.g. covers or child seats) can damage  
To optimise the temperature provided by the  
system during automatic adjustment (AUTO),  
manually set the three seat heating levels to  
optimise the function. The optimisation proc-  
ess will be displayed in the seats submenu of  
the infotainment display (Optimizing).  
the seat heating.  
●
People with limited pain and temperature  
thresholds must never use seat heating.  
●
In the event of smells, switch oꢁ the seat  
heating immediately and have it inspected by  
a specialised workshop.  
●
If an abnormality in the device's tempera-  
ture control is detected, have it checked by a  
specialist workshop.  
●
If the original seat upholstery is replaced by  
another material, the seat heating may over-  
heat or its operation may be limited.  
To reset the process and start the learning  
period, go to the submenu Settings > Reset  
driver / front passenger proꢀle.  
WARNING  
If the fabric of the cushion is wet, this can ad-  
versely aꢁect the operation of the seat heat-  
ing, increasing the risk of burns.  
For the sake of the environment  
The seat heating should remain on only when  
needed. Otherwise, it is unnecessary energy  
consumption.  
Cases in which the heat seating should not  
be switched on  
●
Make sure the seat cushion is dry prior to  
using the seat heater.  
Do not switch the seat heating on if any of the  
following conditions are met:  
●
Do not sit on the seat with clothing that is  
wet or damp.  
Note  
●
The seat is occupied by a person with limited  
●
Do not leave clothing that is wet or damp  
Please note the following for the smart  
heated seats feature:  
perception of pain or temperature.  
on the seat.  
●
●
●
●
●
The seat is not occupied.  
●
Do not spill liquids on the seat.  
●
The system may reset the learning process  
if it has not been satisfactory.  
The seat has a cover.  
A child seat has been installed on the seat.  
The seat cushion is wet or damp.  
The outdoor or indoor temperature is  
●
Separate driver’s seat learning will be re-  
quired for each registered user.  
●
The passenger seat learns regardless of the  
active registered user.  
greater than +25°C (77°F).  
134  
Heating, ventilationandcooling  
Smart steering wheel heating  
●
The use of the stationary air condition-  
The following message may be displayed on  
the instrument cluster screen: The air con-  
ditioning is not working properly.  
Go to the workshop.  
ing function with electricity consumers  
The steering wheel heating switches on auto-  
matically at low outside temperatures. It is acti-  
vated in the Settings submenu.  
››› page 136 may aꢁect the learning time  
of the function.  
●
Have the system checked by a specialised  
workshop.  
Automatic disconnection  
Steering wheel heating  
The steering wheel heating will be switched oꢁ  
automatically when any of the following condi-  
tions are met:  
The cooling system  
cannot be switched  
on or its operation is limited  
The cooling mode operates when the driv-  
er's seat is occupied.  
The selected steering wheel heating level will  
be displayed on the instrument cluster display  
and in the air conditioning menu.  
●
●
●
Electrical energy consumption is too high.  
The steering wheel heating system is faulty.  
If the ignition is switched oꢁ.  
●
●
Switch on the fan.  
Adjusting the steering wheel heating via the  
infotainment system  
Check the air conditioning’s fuse  
››› page 279.  
●
In the air conditioning menu, press the steer-  
Troubleshooting  
●
Change the active combined ꢀlter  
ing wheel heating function button . The  
heating is switched on at its maximum level.  
››› page 311.  
or  
The concentration of CO2 in the  
●
If the fault continues, consult a specialised  
●
Press the function button repeatedly to set  
air in the vehicle interior is too high  
workshop.  
the desired level.  
The control lamp lights up red or yellow.  
●
To switch oꢁ steering wheel heating, press  
The following message may be displayed on  
the instrument cluster screen: Health risk!  
High CO2 concentration. Open the  
windows!or Health hazard! CO2 very  
high. Open all the windows now!.  
Change the temperature unit (Climatronic)  
the function button several times until no LED  
is on.  
The temperature display can be changed from  
Celsius to Fahrenheit on the Infotainment sys-  
tem screen using the function button  
Cases where the steering wheel heating  
switches on automatically  
> Set-  
tings > Units.  
●
●
Open all windows immediately.  
If you switch the drive system on again within  
approx. 10 minutes, the steering wheel heat-  
ing is automatically switched on at the last set  
level.  
Water or water vapour under the vehicle  
Have the system checked by a specialised  
workshop.  
If the humidity and temperature outside the  
vehicle are high, condensation can drip oꢁ  
the evaporator in the cooling system and form  
a pool underneath the vehicle. This is normal  
and does not indicate a leak!  
The air conditioning does not work or  
the CO2 concentration cannot be measured  
The control lamp switches on yellow.  
135  
Air conditioning  
NOTICE  
When the outside humidity is high and the am-  
bient temperature is low, condensation water  
may evaporate when the stationary air condi-  
tioning is operating. In this case, steam may  
be released from underneath the vehicle. This  
does not mean that the vehicle has any dam-  
age.  
Immediately air condition the parked vehicle  
(only if the driver is inside the vehicle)  
Never place food, medicines or other tem-  
perature-sensitive objects close to the air  
vents. Food, medicines and other objects  
sensitive to heat or cold may be damaged or  
made unsuitable for use by the air coming  
from the vents.  
●
●
Switch the ignition oꢁ.  
Press in the Infotainment system’s depar-  
ture menu ››› page 37.  
The vehicle will be air-conditioned for approx.  
30 minutes. The function switches oꢁ auto-  
matically. For this to work, the drive system  
should not be switched on.  
Stationary air condition-  
ing  
Note  
Using the stationary air conditioning with-  
out connecting the charging cable reduces  
the vehicle’s range. At extreme exterior tem-  
peratures, the heating or cooling power of  
the stationary air conditioning may be insuf-  
ꢀcient to reach the desired temperature.  
The vehicle can also be air-conditioned before  
a desired departure time ››› page 137.  
Introduction  
Immediately air condition a parked vehicle  
(only if the driver is not in the vehicle)  
With the stationary air conditioning you can  
cool, ventilate and heat the passenger com-  
partment while the vehicle is parked. In winter,  
you can also demist the windscreen and leave  
it free of ice and snow (if the layer is thin).  
●
Open the infotainment system’s Stationary  
air conditioning menu.  
Operating the stationary air condi-  
tioning  
●
●
●
Switch the ignition on.  
Press the HOME button  
The stationary air conditioning is powered  
through a socket or the vehicle’s high voltage  
battery. The stationary air conditioning can  
be programmed and controlled in the infotain-  
ment system and by using the My CUPRA App,  
thanks to the CUPRA CONNECT Gen4 tech-  
nology.  
.
The stationary air conditioning only works if  
the high voltage battery is suꢁiciently charged.  
Press  
.
Setting the desired temperature  
The stationary air conditioning can be used  
without the charging connector being plugged  
in. When the charging connector is not plug-  
ged in, the stationary air conditioning receives  
the necessary electrical power from the high-  
voltage battery.  
●
Open the infotainment system’s Stationary  
air conditioning menu.  
You can ꢀnd information about the app, its  
availability and the necessary requirements for  
its use, as well as compatible terminals, on the  
●
●
Press  
.
Set the desired temperature using and  
.
Internet ››› page 219.  
Switching oꢁ the stationary air conditioning  
●
Connect the drive system.  
136  
Stationaryair conditioning  
The maximum pre-operation time of the elec-  
trical convenience consumers is approx. 10  
minutes before the departure time.  
The stationary air conditioning switches oꢁ  
automatically  
Air conditioning the vehicle for departure  
●
Open the Stationary air condition-  
ingmenu.  
●
After approx. 30 minutes if the vehicle is  
If the air conditioning is switched on immedi-  
ately, the electrical convenience consumers  
are also activated.  
air-conditioned by immediate air-conditioning  
while the ignition is switched oꢁ.  
●
●
●
Press to open the timer menu.  
Set the scheduled departure time.  
Activate the timer using the checkbox.  
●
After approx. 15 minutes if the drive system  
has not been switched on by one hour after  
the scheduled departure time.  
Air conditioning the vehicle during high-  
voltage charging  
The earliest scheduled departure time is dis-  
played in the infotainment system’s departure  
menu, and can be switched on and oꢁ there  
››› page 37.  
●
When the state of charge of the high voltage  
If the vehicle’s high-voltage battery is to be  
charged with alternating current (AC) or di-  
rect current (DC), the vehicle can be air con-  
ditioned before the scheduled departure time.  
This can be set in the infotainment system, un-  
battery drops excessively.  
Note  
Stationary air conditioning with additional  
electrical convenience consumers  
Noises will be heard while the stationary air  
conditioning is running, caused by its opera-  
tion.  
der charging settings ››› page 79.  
If air conditioning for departure is to be used,  
the electrical convenience consumers, such  
as seat heating, steering wheel heating or the  
heated rear window, can also be switched on  
automatically before the departure time. The  
electrical convenience consumers depend on  
the equipment. They are only activated in low  
temperature conditions.  
Air-conditioning the vehicle after unlocking  
it  
Programming the stationary air  
conditioning  
●
Open the infotainment system’s Station-  
ary air conditioningmenu.  
The stationary air conditioning can be pro-  
grammed in the Infotainment system for a  
scheduled departure time. You can set the de-  
sired temperature of the vehicle interior for the  
vehicle’s planned departure time.  
●
●
Press  
.
Check the Air condition the vehicle  
●
Open the Stationary air condition-  
after unlockingcheck box by pressing it.  
ingmenu.  
The vehicle will be air-conditioned for 5 mi-  
nutes as soon as you unlock the vehicle door.  
●
●
Press  
.
Based on the desired temperature, the vehicle  
calculates the time that the stationary air con-  
ditioning needs to be switched on to reach this  
temperature by the departure time. The maxi-  
mum pre-operation time of the stationary air  
conditioning is approx. 30 minutes before the  
departure time.  
Select the seats whose convenience con-  
sumers should be connected along with the  
stationary air conditioning. Only these seats  
will be heated before the departure time.  
Checking the programming  
When the ignition is switched oꢁ, the infotain-  
ment system displays the next time that is ac-  
tive and the set functions.  
●
To turn on the window heating before the  
departure time, activate the Automatic win-  
dow heatingfunction  
137  

Related Topics

Popular Owner Manuals